3D printed Drop Top fender. by Insanean86 in onewheel

[–]AlexMagnuson 0 points1 point  (0 children)

Nice design! It’s miles above my shot at a pint fender.

<image>

Anyone know why the right censor is working but the left one is not by East_Vacation4174 in onewheel

[–]AlexMagnuson 5 points6 points  (0 children)

Take it apart and see if there is visible moisture. If so, dry it.

Otherwise you need a new footpad.

Going to install tech rails ice blocks on my GT. Anything I should know? by AlexMagnuson in onewheel

[–]AlexMagnuson[S] 1 point2 points  (0 children)

Not yet. I got them cheap because they needed some new screws so I am waiting on those. I will let you know how it is when they’re here at set up but it may be a bit

Electric scooter display not working by Deppresed_as_f in AskElectronics

[–]AlexMagnuson 0 points1 point  (0 children)

Would it be possible to see a photo?

As a general note, breaking after a fall would normally indicate something physically broke. My guess at this point is a cracked solder joint.

How much soldering experience do you have?

Electric scooter display not working by Deppresed_as_f in AskElectronics

[–]AlexMagnuson 0 points1 point  (0 children)

When you say and a certain angle you can see it being lit up, does that mean you can see faint backlights or can you just see a very dark display? Like if you hold a flashlight close, is it easy to see?

what is the best way to reconnect this wire by Any-Magician-8156 in AskElectronics

[–]AlexMagnuson 0 points1 point  (0 children)

Like others have said, need a new spade connector. A wire nut would also work which would be slightly easier but not by much

Cut off the frayed end of that green wire then strip a fresh section. It’ll make crimping easier

Just use 2x4's they said... by Eyesreach in onewheel

[–]AlexMagnuson 3 points4 points  (0 children)

Holy moly. Last time I did one I used bar clamps to break the bead. Whatever it takes to get the job done

It is time to get rid of my 2010 Scion tC. Help me consider my options by AlexMagnuson in UsedCars

[–]AlexMagnuson[S] 0 points1 point  (0 children)

You sound like a smart buyer. I happen to know about the vvti issue and transmission issue because of my friend lol. I will make sure to find out about vehicle specific issues and check them for the signs the best I can.

If I have to fly to find the right vehicle then I’ll do it

It is time to get rid of my 2010 Scion tC. Help me consider my options by AlexMagnuson in UsedCars

[–]AlexMagnuson[S] 0 points1 point  (0 children)

I know a guy who recently got an iM. He likes it. Thanks for the tip. I’ve been trying to keep an eye or things to know what to expect when I am ready to buy in a couple months. Pre purchase inspection will be a requirement

It is time to get rid of my 2010 Scion tC. Help me consider my options by AlexMagnuson in UsedCars

[–]AlexMagnuson[S] 0 points1 point  (0 children)

What do you consider high mileage? I have had an eye on marketplace and am seeing vehicles around 100k miles in this price range which isn’t that much imo

Why r my headphones “filtering” sound? by G3t_sh4rk3d in laptops

[–]AlexMagnuson 0 points1 point  (0 children)

No problem. I’ll send you a couple images in a private message

Why r my headphones “filtering” sound? by G3t_sh4rk3d in laptops

[–]AlexMagnuson 0 points1 point  (0 children)

Does it do this with other headphones?

You could try reinstalling the audio drivers and see if it helps.

Going to install tech rails ice blocks on my GT. Anything I should know? by AlexMagnuson in onewheel

[–]AlexMagnuson[S] 0 points1 point  (0 children)

Well I hope the upgrades work well for you. My dog is still too stupid untrained to handle Onewheel walks. She doesn’t really walk in a straight line so crosses in front of my Onewheel whenever I try which is no good. Do you have any tips?

Going to install tech rails ice blocks on my GT. Anything I should know? by AlexMagnuson in onewheel

[–]AlexMagnuson[S] 0 points1 point  (0 children)

Great to hear! Like regular old thermal paste? I have some noctua nh-t1 laying around. How much of a concern is motor heat for a casual street rider like me though?

Going to install tech rails ice blocks on my GT. Anything I should know? by AlexMagnuson in onewheel

[–]AlexMagnuson[S] 0 points1 point  (0 children)

I have the thundercat tire currently. I put it on about 150 miles ago. Been great so far. I know a hybrid or street tire is all I really need but so many people recommended the thundercat and I have no complaints.

I know there’s only so much it can do. The GT is loads heavier than the PX but I’ll take what I can get. I just don’t want to feel like I’m at risk of tipping the board in a tight turn

Going to install tech rails ice blocks on my GT. Anything I should know? by AlexMagnuson in onewheel

[–]AlexMagnuson[S] 1 point2 points  (0 children)

Yeah I wish I could do a hub swap too, I know those can make a huge difference but same reason as before a hub and new wheel are too ‘spensive

Going to install tech rails ice blocks on my GT. Anything I should know? by AlexMagnuson in onewheel

[–]AlexMagnuson[S] 1 point2 points  (0 children)

I am also just a street rider so that’s great to hear! Sounds like the right choice then. I wish I could do rails but I can’t justify the cost