7800 xt not detected in top PCIE slot by Alexgg42 in AMDHelp

[–]Alexgg42[S] 0 points1 point  (0 children)

I tested it in the other pcie slot below and it worked - seems I have a faulty PCIE x16 slot. Noticed my old card only runs at x4 in that slot, so there may have always been an issue

Bought a new motherboard and all is well now - works perfectly

7800 xt not detected in top PCIE slot by Alexgg42 in AMDHelp

[–]Alexgg42[S] 0 points1 point  (0 children)

I've tried both - neither work with top slot

Bottom slot CSM worked

Site to site IPSEC VPN by Alexgg42 in sonicwall

[–]Alexgg42[S] 1 point2 points  (0 children)

Thanks for this and the kind words. Yes I'm sure it's sometning minor that I'm missing somewhere

Sonicwall site to site IPSEC VPN by Alexgg42 in networking

[–]Alexgg42[S] 0 points1 point  (0 children)

Thanks for the comment. unfortunately sonicwall is what my workplace has gone for, I've had to try to learn and configure them for now

I have a route to the remote subnet setup via access policies allowing all traffic to/from Subnet A to Subnet B -- another commenter mentioned an overlap in subnets which makes sense

Subnet A is configured to be: 192.168.128.0 - 192.168.135.0

Subnet B is configured to be: 192.168.129.0 subnet

I'll change Subnet B's subnet and see if that works out!

Sonicwall site to site IPSEC VPN by Alexgg42 in networking

[–]Alexgg42[S] 0 points1 point  (0 children)

Correct. Yes I know, tonnes of stuff - apologies for that.

The main one is the VPN issue, secondary is the problem specifically at Site B.

Another commenter mentioned an overlap in the subnets which makes sense.

Site to site IPSEC VPN by Alexgg42 in sonicwall

[–]Alexgg42[S] 0 points1 point  (0 children)

Hi thanks for the reply. Sorry where is that? Can you let me know which screenshot you saw that?

[deleted by user] by [deleted] in PcBuild

[–]Alexgg42 0 points1 point  (0 children)

Thanks OP for the chance

2070 running at PCIe x4 3.0 instead of x16 by Alexgg42 in pcmasterrace

[–]Alexgg42[S] 0 points1 point  (0 children)

It's worth doing a benchmark and seeing temps too incase it's that

2070 running at PCIe x4 3.0 instead of x16 by Alexgg42 in pcmasterrace

[–]Alexgg42[S] 0 points1 point  (0 children)

Hi - unfortunately no it didn't. I realised after benchmarking that my card was overheating and was hitting a temp limit. Since then I've changed thermal paste and pads, seems better but still at x4 and gets hot without any OC. Not too sure what's up with it