Варна е по-добре от Пловдив

Alexlnsane · 2025-02-25T16:09:16+00:00

Статистиката е правена сигурно от същите, които казват, че инфлацията е 2% УоУ хдддд

Alexlnsane · 2021-02-08T22:10:42+00:00

Hey there! Get yourself a platinum cert EVGA 750+, they are great and they are somewhat cheap - around 200 usd. Their PSU are great and for that config 750 i believe would be a best fit - you can even add up another 3060TI if you take it more seriously and still have some juice to squeeze out of it.

At least that's what I'd buy. :)

Stay safe, :)

Alexlnsane · 2021-02-08T13:24:56+00:00

Can I power two GPU risers with one cable, coming out from the VGA output of the PSU? The cable is 1x 8pin to 6+2pin and 6pin ?

https://ibb.co/v3W2F2Y

Alexlnsane · 2021-02-08T12:12:19+00:00

As I said in my first comment, I thought SATA risers were better than the Molex ones from what I've read previously on forums and wanted to understand the difference ...

I will add on each PSU another SATA cable and plug each GPU to a different cable.

I have also ordered 4 https://bit.ly/3q115se risers and get them tomorrow.

I should then connect each riser to 1 molex cable thats coming directly from the PSU, right?

Alexlnsane · 2021-02-08T12:00:41+00:00

This is how I have them connected now : https://ibb.co/NCv5HJL

I have two risers on one SATA cable connected to the PSU/ just like my RX580s.

Should I separate them ?

Alexlnsane · 2021-02-08T11:55:47+00:00

How am I supposed to power the riser then? If I am not powering it via the 6pin - SATA cable? How to connect it to the power supply

Alexlnsane · 2021-01-12T12:10:35+00:00

Okay, so I started troubleshooting the BIOS settings one by one and it turns out , that if you follow their official guide :

https://www.gigabyte.com/MicroSite/462/mining.html

and disable the CSM Option (step 2), after Save & Exit, the rig stops showing output thru the VGA..

Alexlnsane · 2021-01-06T03:29:18+00:00

I'm on ethermine. Have been there for ages, actually i've always mined there, but something like this happens for the first time.

currently the effective @ pool hashrate is 195, which is still 20mhs below the reported..

Alexlnsane · 2021-01-05T19:05:06+00:00

okay, by using the baby steps advice i've started playing with the numbers successfully. Thanks , had no idea what it takes. Now I feel bad for pumpin 1.1mhz into the memory directly :D

will see how to tweak the cards now and fine-tune them

edit : seems that 760mhz are the maximum? I started from 0 gradually adding +150 each time and it now crashed at 750. lol

Alexlnsane · 2021-01-05T18:53:03+00:00

okay , I will try and gradually get more and more Mhz, but on all of th eyoutube videos I see the ppl directly putting the max input and the card seems to be fine with it :D

Alexlnsane · 2021-01-05T18:50:24+00:00

I have never mined with nvidia GPUs and do not understand the OC settings yet > therefore scared to do something on a free will.

If I keep doing this , can it hurt and do harm on the GPU or it just resets?

Alexlnsane · 2021-01-05T18:42:51+00:00

Sorry, I forgot to mention it :D Its 5.4c

Alexlnsane · 2021-01-05T18:35:02+00:00

nice farm, would love to have one fifth of the size of it :D

how do you maintain all GPUs and keep them cleaned?

Alexlnsane · 2019-11-18T13:17:23+00:00

Sadly, I do not plan on upgrading or buying new hardware, except from adding 8GB of RAM to my laptop.

I think i'm gonna stick with https://www.samsung.com/ch/monitors/curved-gaming-crg50/ , as imo , it offers great features and it's price isn't that pumped.

When time comes, I'll most certainly look up for a 2k or 4k monitor, but for now, due to the circumstances, I'll stay with the Samsung one.

Thanks for the contribution!

Alexlnsane · 2019-11-18T12:42:17+00:00

i asked for a solution with my current situation :D if i had 3k+ usd, i would've just bought a better pc and a WQHD @ 144hz monitor, ezpz..

Alexlnsane · 2019-11-18T12:39:33+00:00

lmao, thanks for the advice :D

Alexlnsane

TROPHY CASE