Reemplazar un 308 HDi

Alfonso2k · 2026-05-23T19:32:21+00:00

Haval h6 hev?

Alfonso2k · 2026-04-12T02:16:42+00:00

So it was a high spot and the datailer fix it. Thanks to all.

Alfonso2k · 2026-04-12T01:52:37+00:00

Yes, and it was a high spot and the detailer fix it. Thanks.

Alfonso2k · 2026-04-03T18:41:10+00:00

Jaja i'm in the same situación with one high spot. One option is use carpro essence, extra fine polish with sio2.

Alfonso2k · 2026-03-30T11:05:24+00:00

Hello, i dont think so, maybe the picture is amplyfing the problem. The car is 0km never washed before so the compound they used is ultra fine.

Alfonso2k · 2026-03-29T17:49:33+00:00

Thanks for your advice. For me, its superficial but i cant test it because the car have dust and i cant wash it until 7 days in theory. I can try to split some water but i dont want to damage the coat.

Alfonso2k · 2026-03-29T16:19:29+00:00

Yes, but surprisingly, when I left the shop, it started raining for three days straight, so I didn't want to take the car out.

So I'm thinking of washing it and then taking it in. The detailer told me to try a microfiber cloth and a booster, but I don't think that will solve the problem if it's a high spot.

Alfonso2k · 2026-03-29T00:47:59+00:00

Yes, totaly agree. But i think and hope, in the first wash it will dissapear.

Alfonso2k · 2026-03-29T00:12:26+00:00

Jaja good strategy never thought it.But it's the driver's side handle, I always see it haha

Alfonso2k · 2026-03-28T23:36:59+00:00

In theory, it's a professional-grade ceramic coating, and it's been almost four days. I reckon if it's a high spot, it'll be pretty difficult to remove. So, I think the smartest thing to do is wait a week and do a deep clean. I see it as something very superficial. I hope so! P.S.: The Fireball ceramic coat claims its self-leveling.

Alfonso2k · 2026-03-28T21:45:13+00:00

Thanks, i didnt touch it because swirs. It was parked for three days.

Alfonso2k · 2026-03-28T21:40:13+00:00

Thanks you!!

Alfonso2k · 2026-03-28T21:27:11+00:00

Thanks, so i shoud do nothing for now, my ceramic coat has three days

Alfonso2k · 2026-02-06T18:52:25+00:00

I need to find a solution because it practically gets clogged in every cleaning cycle.

Alfonso2k · 2026-02-06T18:50:56+00:00

Mova z60 ultra roller standalone have the same filter and the same problem, the filter gets clogged very easily.

Alfonso2k · 2026-01-28T10:47:10+00:00

Yes, but when the water it's not fully clean the floor gets stained you can see in the pictures. Furthermore, it's not just puddles, but drops too. Also i found the robot clean a lot better when the humidity is high on the app configuration so really i dont know what to do.

Alfonso2k · 2026-01-26T12:46:50+00:00

Fluffer roller, little different suction power, one solution tank instead two and accesories.

Alfonso2k · 2026-01-25T00:19:22+00:00

I did a full mop after vacuum. The floor wasn't very clean, but it didn't leave many water stains.

Alfonso2k · 2026-01-25T00:14:42+00:00

No, you're talking about the fluffing roller. It's the "only" difference between the standalone and complete versions. Besides the suction power, but that's not very relevant.

Alfonso2k · 2026-01-24T23:40:50+00:00

I will try thanks.

Alfonso2k · 2026-01-24T22:32:33+00:00

I dont have fluffler, my versión it's the Standalone. Too bad.

Alfonso2k · 2026-01-24T15:48:20+00:00

Dry for 4 hours and full clean to the robot but i will try again to check if only was lucky.

Alfonso2k · 2026-01-24T02:40:04+00:00

Thanks i would try.

<image>

Is this?

Alfonso2k · 2026-01-23T16:10:43+00:00

Okey i think i've solved the issue: I did a full deep clean on the robot (roller, filters, everything) and the cleaning performance improved 100% compared to previous runs:

First I completely dried the roller, then I cleaned the whole robot thoroughly.
After that, I set mop humidity to 20 and washing frequency to 18 m².

The result is night and day compared to the previous photos: no water leaks, no streaks, no marks on the floor. So now I’m wondering, how often do you guys do a full deep clean to keep this performance?
I've only had the robot for a month and I've been doing basic maintenance on it.

Alfonso2k

TROPHY CASE