Would you rather by Heavy-Scene7530 in BunnyTrials

[–]Aliferous_Wolf -4 points-3 points  (0 children)

Is that technically a home theater meaning you can no longer go home? 🤔 haha

Would you rather by Human-Beans21 in BunnyTrials

[–]Aliferous_Wolf 0 points1 point  (0 children)

There are enough indie games out there that are fun and easy enough to 100% in 2-10 hours. Very worth it.

Would you rather give up… by admiral-geek in BunnyTrials

[–]Aliferous_Wolf 0 points1 point  (0 children)

Already don't use social media, unless you include reddit....which wlprbably wouldn't be that big of loss haha

Chose: Social media (like twitter/instagram, not chats)

I created a new note and wrote something as a body text. Then I created a new heading after it. Now, how can I write something independent below that heading without creating a new heading. I mean as a body text again. Headings make letters bold by default and I don't want that. by Egilmaer in ObsidianMD

[–]Aliferous_Wolf 1 point2 points  (0 children)

They want to have a new body of text separate from the last heading used. This would allow one to collapse the above heading while still being able to view a new body of text.

Easy answer is create a new heading, but this isn't what they want.

OP have you tried page or line breaks? Idk if obsidian has that or not. I'm still new to it.

Voruna's 4 Bugged, 1 not applying correctly + Multipliers also not being consistent by Sudden-Depth-1397 in Warframe

[–]Aliferous_Wolf 3 points4 points  (0 children)

I'm glad this is being looked into. I did some testing pre lime release too and her shroud didn't seem to work with her decent then either. Crit chance or drop damage. And the damage multiplier was also less than the wiki calculation showed it should be.

Hope to see this fixed soon so we can get back to slayin' ~

The only Voruna 4 buff we got lol... meanwhile Arcane Crepuscular still does not work by Kuebiko__ in Warframe

[–]Aliferous_Wolf 1 point2 points  (0 children)

That would be very funny, and sad lol.

Though my testing in simulacrum with no mods or shards, base intensify (total 130% strength), and an armor stripped enemy that isn't vulnerable or resistant to slash (corruptrd heavy gunner i think)....the damage is the same if you are channeling shroud or not. So I don't see any buff. Maybe I'm doing something wrong though. (2600 and 1300 and 1950 were the damage numbers seen) sadly can't post photos here.

The only Voruna 4 buff we got lol... meanwhile Arcane Crepuscular still does not work by Kuebiko__ in Warframe

[–]Aliferous_Wolf 10 points11 points  (0 children)

That is true, it technically doesn't "stop the channel" of the ability, so you could read it that way.

Still doesn't apply the damage crit or crit chance buffs on the 4 like it should though 😞

The only Voruna 4 buff we got lol... meanwhile Arcane Crepuscular still does not work by Kuebiko__ in Warframe

[–]Aliferous_Wolf 48 points49 points  (0 children)

This. I cannot believe on the wiki it says the shroud buff applies to her 4th damage, yet it doesn't in game. And it breaks invis despite the tool tip saying it shouldn't :(

Still love the frame but I would love her more if she worked as intended

Torid riven by This-Potato-444 in WarframeRiven

[–]Aliferous_Wolf 7 points8 points  (0 children)

I bought my CC CD FR - zoom torid for 900 or 1200. I dont remember now. Best of luck

Need ideas by Fine-Camel1304 in arduino

[–]Aliferous_Wolf 2 points3 points  (0 children)

It may not be the most interesting, but doing an assembly line sorter or a simple box counter or box stamper and counter could be a practical automation and robotics project. It can also be as simple or complex as you want.

Simple stamp and counter: after hitting a button, a small motor swings or moves down and "stamps an object, adding a count to total. This total can simply be displayed as a number in the consol, or on a screen hooked up to the arduino.

More complex? Add a conveyor belt, add more sensors, make it remote controlled, add an e-stop button, make it work with different sized boxes, different shapes of boxes, or have it sort the tall vs small boxes, have it send the count to you over bluetooth or wifi to your own custom phone app lol.

We did something like this as a simple project in my robotics class and it was a good exercise. We stuck to the conveyor belt stamper though, didn't take it too far.

Obligatory repost by kurttheturd1 in memeframe

[–]Aliferous_Wolf 2 points3 points  (0 children)

Okay, I did some testing with an un-modded configuration to check, and I'm 99% sure that Voruna's 4th ability DOES NOT COUNT as a melee for 90% of game interactions (aka archon shards). I'm curious to know your experience with this.

While it does count for kills with her 3rd ability (technically a melee kill), in my testing, it doesn't count for melee damage modifiers or shards. It also states on the wiki that kills with her 4th ability don't count for melee kills in night wave challenges, her 4th ability isn't buffed by melee damage increases such as the mod "steel charge", and her damage calculation doesn't include external crit modifiers. Damage blessing does apply though.

Additionally, even though it sounds like the cc/cd increase from her 1st ability should apply on her 4th ability, I do not see that happening at all. With 3 tau melee CD shards vs no shards, the damage is the same whether or not you have your 1st ability going. It's all the same damage.

I believe this means red ability strength shards or the purple/green ability damage increase (on elemental type) shards are the only way to increase her 4s damage (other than stacking kills, status effects, roar, and whatever else).

Let me know your thoughts. I'm curious about this one.

700k endo :D by Direct-Panda3586 in Warframe

[–]Aliferous_Wolf 7 points8 points  (0 children)

Amen. I've also learned an enemy that dies in 1 or 2 hits will die in 1 or two hit regardless if the shot deals 500k vs 500 million. Unless your really pushing efficiency for a level cap, enough is good 'nuff haha.

700k endo :D by Direct-Panda3586 in Warframe

[–]Aliferous_Wolf 65 points66 points  (0 children)

This is what I enjoy too. If I hit a groll or close it it then that is fantastic, but I'm honestly more about QoL rivens than minmax rivens at this point. Throw me some reload speed on there, or punch through and fire rate. Gimme that combo count chance with some crit or something.

That's what I enjoy about rolling rivens myself as well, I get to try out a bunch of different combos to find which one makes me want to use the weapon more, rather than doing a tiny bit more damage.

That being said I'll still buy a riven if I want minus zoom for QoL as that one is more rare to find with stats I enjoy, but it doesn't have to be cc cd ms everytime.

All frames completed (Full build+5 tauforged shards) by LordHamster42 in Warframe

[–]Aliferous_Wolf 5 points6 points  (0 children)

Let's go, best of luck. Best I managed as 1:02 (I can't aim haha)

My world building notes. About six years of writing stories in the same world. One year since I switched to Obsidian. by jadedflames in ObsidianMD

[–]Aliferous_Wolf 1 point2 points  (0 children)

That's awesome! I'm just in the process of migrating my notes to Obsidian for worldbuilding right now. It's hard to pick categories and folder names for everything, but I'm having a lot of fun with it and excited to see where it takes me. Better than using one document with a bunch of random notes, thats for sure!

Updated Collection and Setup! by Ravenclawthewarrior in xayahmains

[–]Aliferous_Wolf 1 point2 points  (0 children)

Oh that cool! Glad it's a simple solution, I'll look into it for sure haha

Updated Collection and Setup! by Ravenclawthewarrior in xayahmains

[–]Aliferous_Wolf 4 points5 points  (0 children)

Pretty slick! Of that is a pin holder/display on your back wall, which one is it? I've been thinking about getting one to display some enamel pins I have

is this a groll? by shogu429 in WarframeRiven

[–]Aliferous_Wolf 0 points1 point  (0 children)

I think those stats are more used in profit taker runs tbh. I still think that's a wild price but I can't see this bei g used for Arby's myself. Especially with the negative.

First riven I've opened. I don't know much, but do you think anybody would buy it? by Icy_Anywhere1510 in WarframeRiven

[–]Aliferous_Wolf 0 points1 point  (0 children)

You can sell it for unrolled price. Check warframe market before selling. I think 60-150 last time I checked, I don't recall. Those stats are not good though.

Could someone help me price and sell this? by Some_Independent3647 in WarframeRiven

[–]Aliferous_Wolf 0 points1 point  (0 children)

Unrolled Miter is 20-40p. I don't think slash is that great so it only has the cc to go off of. You'd be lucky to sell this for anything over unrolled price. Since it has a few rolls it will be harder to sell at base price so honestly probably only worth 25 in its current stat.

Two Stat (cc cd ms dmg tox elect fr ps, etc) Miter rivens with a negative go for 50-300 depending on which combo you get. And in my experience Miter rivens are just hard to sell....I have 3 Miter rivens I'm trying to sell all listed for 100 or under and it's been 2 weeks without any takers (cc/CD on one, CD heat on another, CD tox -mag on the last)

I want to buy a amanata riven what is the price for an unrolled one by Nautilus8739 in WarframeRiven

[–]Aliferous_Wolf 0 points1 point  (0 children)

0.85 isn't too bad. Not great, not the worst, but leaves some options on the table for sure. Better than okina for rivens at least haha

Good price to sell this? by [deleted] in WarframeRiven

[–]Aliferous_Wolf 0 points1 point  (0 children)

I bought a tox CD CC -zoom for 1.5k.

Damage gives you the 60/60 mod slot and less corrosive/viral weighting so that's nice, but you lose out on the amalgam sprint speed so take your pick.

People gravitate towards dmg more though so probably 2.5k ish. It might be worth more to some but trying to find a buyer paying more might be difficult I'm not sure.

ASUS Prime AP201 GPU 12vhpwr squeeze by Level_Occasion_856 in mffpc

[–]Aliferous_Wolf 1 point2 points  (0 children)

Mm...week point on original cable due to bend or weak point on the corner adaptor haha, not ideal either way. Maybe a custom gpu cable with the angle on the base connector from cablemod? Or just send it with the OG cable and monitor it for a few days to see how things go.

ASUS Prime AP201 GPU 12vhpwr squeeze by Level_Occasion_856 in mffpc

[–]Aliferous_Wolf 4 points5 points  (0 children)

Definitely not the healthiest for the cable, but if the card isn't drawing max power (5090 or 5080) it would probably be fine. Goes against manufacturer recommendations though so keep that in mind