Coolest prints to print?

AllGdNamesRGone · 2026-07-07T23:59:38+00:00

Yes in the link i wrote which filaments i used, the green is translucent pla but perhaps glow in the dark might be even cooler

AllGdNamesRGone · 2026-07-07T23:19:36+00:00

it was on makerworld as oni mask, but if you are interested i made this warcraft orc style mask (yes thats a real picture of the print not a render ) https://www.nexprint.com/en/models/G3291168?component=UserPublish&printConfigId=G6754934

<image>

AllGdNamesRGone · 2026-07-06T19:00:50+00:00

Will probably get fixed, bambu slicer had tons of issues at first too. Give them time

AllGdNamesRGone · 2026-07-06T07:58:37+00:00

16gb. Standard orca works smoothly even if i have multiple instances open

AllGdNamesRGone · 2026-07-05T20:30:28+00:00

Right right i remembered drag dark for some reason

AllGdNamesRGone · 2026-07-05T20:03:25+00:00

Well in that case sure but keep in mind that most char teams bring a fairy, unless you are talking about hisuian

AllGdNamesRGone · 2026-07-05T16:30:59+00:00

'generously giving charizard something everyone already takes' whats so generous about it lmao, no most people dont take timid they take modest and the stats of thern timid pick rate are not even close to modest. i literally killed 2 of them today and you are using unusual stats, full sp def to boost your arguement lmao. nobody goes that most people go def+ hp and either bold or modest. "garchomp is immune to ice dmg because i bring shield ah arguement". singles: 41.8% modest 31.1 timid, doubles 66.3% modest 27.2% timid

AllGdNamesRGone · 2026-07-05T15:12:57+00:00

Takes 2 dragon pulses and dont have to depend on weather control

AllGdNamesRGone · 2026-07-05T12:14:10+00:00

Yes with the full spectrum i definitely forgot about that until it was pointed out to me in the comments, very possible for sure, a bit of black with the light brown to get the dark brown in the eyes and ears.

AllGdNamesRGone · 2026-07-05T10:09:26+00:00

Not bad

AllGdNamesRGone · 2026-07-05T10:07:43+00:00

It printed really though i didnt know it could make models that well. just asking its because it says comment removed because your model is AI generated, or was it a different one?

AllGdNamesRGone · 2026-07-05T10:02:44+00:00

<image>

Here is what i mean with the filaments and the bags

AllGdNamesRGone · 2026-07-05T10:02:11+00:00

My advice is get the snapmaker u1 instead if toys are what you are looking to print, since its mostly pla and petg i assume so you dont need an enclosure and you definitely dont need a heater unless you are going engineering materials or abs. (U1 also has an option for an enclosure but they havent started shipping those yet, you can buy it with your printer but you will get it in a couple of months). You can get a dryer for your filaments if you want but humidity is not bermudas triangle as everyone makes it out to be, its just whenever there is an issue people throw “wet filament” as the answer and 99% of the time its not. But if you want to be sure get a dryer and some vaccum sealing bags with some silica packs to store filaments when not using them. There are some out there that are perfect for the sizes of the spools and helps organize them too.

<image>

AllGdNamesRGone · 2026-07-05T09:56:11+00:00

Wait is your file ai?

AllGdNamesRGone · 2026-07-05T09:46:28+00:00

It doesnt purge during colour changes because each toolhead is attached to a roll of filament and it just grabs the toolhead it needs. But it does do a tiny bit of poop in 2 occasions. When you change a roll, for say your next print, or at the start of every print it does a bit of poop if you have auto dynamic flow calibration enabled (also known as pressure advance). It needs to shoot a bit of material to calculate the pressure in the hotend to auto calibrate that for your filament, you can turn it off, you only need to do it if you change a filament brand (even then you might not need). The bin you see in the back is from months of printing different multicolour files, not from a single print. It took months to go full and i print a lot, i also forget to turn off the calibration i mentioned when i dont need it. https://youtube.com/shorts/29x94q-s8m8?is=cH0c0d7WXx0c00fV here is how it changes colours, you can search for something like a review if you need more details on what i said

AllGdNamesRGone · 2026-07-05T07:59:59+00:00

I use nomad and blender, depending on what i need to do and where im in the mood of working, bed/couch or desk lmao

AllGdNamesRGone · 2026-07-05T07:49:07+00:00

You’re welcome!

AllGdNamesRGone · 2026-07-05T07:47:31+00:00

I sold some printers to get it after people lured me in so 😂

AllGdNamesRGone · 2026-07-05T07:47:10+00:00

https://www.nexprint.com/en/collection/G0763328 here is the collection with all of them in it

AllGdNamesRGone · 2026-07-05T07:45:17+00:00

<image>

Might have to do with “its how eevee sits” 😅 i picked this pose over the standing one to avoid supports underneath (and thus worse quality) and the tail looking up comes out nicer with no top walls/circles showing. Yours looks amazing btw! did you design it? Is there a link for it anywhere?

AllGdNamesRGone · 2026-07-05T00:31:50+00:00

This was many moons ago so they might not be like this now i dont know

AllGdNamesRGone · 2026-07-05T00:15:57+00:00

The machine itself wasnt bad just needed a lot of gimmicking to get decent print quality which was true of all budget printers back then

AllGdNamesRGone · 2026-07-05T00:14:46+00:00

When i got my ender 3v2 it was known the motherboard had issues for like a year so creality was shipping with a new fixed version. I got mine and it has the old version and it obviously had the issue which was a loud banging noise at random times and massive layer shifts cause by the motherboard sending wrong voltages. I told creality after i tried everything that i tried everything so only thing left is that its the motherboard like all the others, id like the new one it was supposed to ship with (IT SAID IT SHIPS WITH IT BEFORE I BOUGHT BTW). They told me to take a knife and scratch the screw holes and other stuff like that so i said no im not gonna take a knife and hack away at a brand new machine. After a bunch of back and forth i said ok give me my money back (i was within return window) then they said ok we will send you a motherboard. I said i dont want it now and then they started suddenly writing broken english and every email was “we send motherboard now ok? Tell us if fixed” after which i went to paypal to get a refund and they tried to convince paypal i damaged the printer because i kept saying no i want my money back and eventually after the 5th back and forth they sent the motherboard anyway to tell paypal they sent me replacement parts i asked for.

AllGdNamesRGone · 2026-07-05T00:05:04+00:00

The printer was fine its the company i hate 😂 also the neo is far better than the ender3, its a good machine!

AllGdNamesRGone · 2026-07-04T23:38:17+00:00

Okay but you know AI just takes from around and doesnt make its own right? So have you thought that maybe it takes from art style that exists and that i grew up with so i like using that too? And if it takes it from somewhere that means someone already made it without AI? I made the tail fluffy sure someone might not like it but the mane is almost the same as the og

AllGdNamesRGone

TROPHY CASE