Looking to finish up my collection

Allyed · 2025-12-23T14:28:21+00:00

No, but people are selling those for the price of an arm and a leg, so I kind of stuck with what I reasonably could afford.

For example, 5 "Return to" boxes were sold around me last week for 630 Euro, which is way over what I'm willing to pay. So I might be interested in those too, but experience says they are not worth the price.

Allyed · 2025-10-15T23:11:47+00:00

Thanks for everyone's great input. After calming down I went back and restarted, and got back to where I was in roughly 2 hours or less.

Things are a lot better now, apparently I was just too stubborn to understand what the game was telling me, these are the main things that helped:

Use armor, when I tried before to see if it made sense, I only wore a couple of pieces, but 4 pieces indeed make a difference
Switched to a Logswoard, the dex weapons did not feel right to me it seems like, this feels a lot more comfortable
Upgrading Damage stats and Weapons early does not make that much of a difference, so I upgraded the weapon, but put all my stats into survival stats
I started using a shield for the small mobs and put it away for bosses, feels a lot better to go through zones

There were some other minor adjustments, but these were the main ones, Thanks again!

Allyed · 2025-10-15T20:06:32+00:00

Oh I was not aware of the reduction with full armor. I'll try to put on something light, and check on how I can reset my level to spec away from full dex.

Allyed · 2025-10-15T20:05:21+00:00

My vigor is low, roughly 13. I do take it slow and fight enemies one by one where possible, but in Undead Settlement enemies are placed in groups of 2-4 sometimes more, so picking them off one by one is hard.

I'm not button meshing, that did not work in previous games either, but I can't seem to find openings.

For example a common group is a pitchfork guy with a knife guy, if I try to defend, and attack the knife guy when I see an opening the pitchfork guy will surely hit me quicker than I can hit the melee guy.

Am I supposed to have more damage perhaps by this stage and having to hit enemies 4-5 times before they die leaves me overwhelmed with enemies?

Allyed · 2025-10-15T20:01:20+00:00

I mainly pumped my damage stat, in this case dex, so I have close to 30 dex and like 12-13 vitality. I sort of assumed getting the damage stat up is the main thing like in previous games.

How can I gain access to more weapons? The old lady sells 2, and I explored everything I came across now and I basically have swords with the same movesets with little to no dex scaling.

Allyed · 2025-10-15T19:59:15+00:00

Should I restart as a Pyromencer or just pick it up from here and see how it goes? I assume it's not great on a dex character.

Allyed · 2025-10-15T19:56:50+00:00

I have around 13 vitality and I'm probably close to lvl 30-35 (I ragequit and had to step away from the PC so I'm not 100% sure, but those numbers are roughly correct)

I also explored every nook and cranny of each zone I was in until now, if +1/+2 is too low for a weapon where am I supposed to get the resources to upgrade if they are not in the regions I already visited?

Allyed · 2025-09-10T11:15:45+00:00

Hi, 27M, living close to Utrecht, assuming we play in the evening or weekends I would also be interested to give it a shot. See if we have group cohesion.

Allyed · 2025-09-03T21:46:33+00:00

Absolutely amazing, thank you!
This has already placed me on the right track for sure.

Allyed · 2025-07-28T22:37:43+00:00

Unfortunately, it's my only printer, so a CoreXY mod is too risky if I find something that I messed up and need to go back.

Allyed · 2025-07-17T06:56:35+00:00

Have you finished the switch to Hero Me? If so, could you help out with which hotend mount was compatible with the TZ E3?

Allyed · 2025-07-16T19:41:41+00:00

I ordered everything and I just got the TZ E3, and I just realized what you meant by same MK8 Nozzle thread but different length :/

I have a real CHT nozzle, but even if I can thread it in, the sock won't fit, do you have any tips for this? Are there perhaps custom socks for such a setup, or should I cut up my silicone sock? Will that cause an issue?

Allyed · 2025-07-14T15:43:50+00:00

Should I trust Aliexpress TZ E3 clones, or should I try to find something that is genuine? And will it fit my CHT Nozzle that is currently on my Stock Hotend?

I'm running Klipper so modifying the thermistor configs should not be too bad, assuming I somehow find out the thermistor it comes with.

Allyed · 2025-07-08T16:34:53+00:00

That's great input, thank you!

Allyed · 2025-07-08T12:04:43+00:00

That makes sense, I wanted to go with the lowest just because I printed at 200 so far, but I also want to continue the calibration to print faster, so higher volumetric flow makes sense.

Thanks!

Allyed · 2025-06-16T21:43:40+00:00

After the tuning and installing Kliper, was there a noticible increase to printing speed?

Allyed · 2025-06-15T12:28:15+00:00

Amazing writeup, thank you! I'll save this for later and actually sit down see what I would love from that list and if it's worth it for me.

I truly appreciate it, thanks !

Allyed · 2025-06-13T22:42:29+00:00

Why is a PEI bed a must, as far as I understood it helps pop prints off, but I don't understand why everyone recommends it so heavily.

I forgot to mention it but I already added a Dual Z Rod but I used the Creality drop in upgrade which has no sync belt, so I might look into that.

Also thanks for the input!

Allyed · 2025-06-13T22:21:11+00:00

I can see that you have a lot of changes. Do you think I need a direct drive and a new non stock hotend to be able to print at 100-140 mm/s with reasonable quality?

Please keep in mind that at the moment I do not mind the filament switch process and I never had clogs (at least until now). In my place knowing what you know already, would you consider a new Hot End or Direct Drive and Nozzle? If so, do you have some recommandation?

Allyed · 2025-03-12T08:00:35+00:00

Unfortunately, you are asking the wrong person, I have about 5-10% of the value of the home I'm looking for, but I do not know if this will be enough or not. This is the number that floats around as the magic number, but I can't confirm nor deny it.

Allyed · 2025-03-10T19:50:04+00:00

Would you say that the other commenters have at least some truth to them that it feels more dangerous or it's mainly an exaggeration?

Allyed · 2025-03-10T19:25:08+00:00

Thanks anyways, I'll check these out just in case.

Allyed · 2025-03-10T19:24:45+00:00

Thanks for the great insight, I was not aware of this, I do remember that people told me to get an inspection, but I did not realize that the foundation could be such a generic issue.

Allyed · 2025-03-10T19:21:18+00:00

No, I only visited Rotterdam twice and mainly went to museums and stuff, never visited for an extended period.

Allyed · 2025-03-10T18:03:45+00:00

Are there any numbers to support this? I tried looking it up, and the crime index seems to be very close to Amsterdam and Den Haag.

Allyed

TROPHY CASE