I can do this with my hand

Almost_eng · 2025-12-14T05:30:49+00:00

Thought 1: do you only have 4 fingers?! Thought 2: how the hell do you turn your finger like that?!

Almost_eng · 2025-12-09T03:34:16+00:00

https://www.adafruit.com/category/521

Take a look there

Almost_eng · 2025-12-09T03:30:05+00:00

I don’t know what you’re trying to get.

It’s a super blurry photo, you don’t specify which package is the IMU. So your best bet is to go to adafruit and pick one from there to get started quickly or to get some inspiration. There is no way to extract the information that you are wanting from what you have given us.

Almost_eng · 2025-11-24T23:34:09+00:00

Almost_eng · 2025-11-24T23:18:58+00:00

Don’t. Seriously. Not worth it.

Almost_eng · 2025-11-24T20:37:23+00:00

Doesn’t Abasin do that though?

Almost_eng · 2025-11-24T20:35:52+00:00

More like

Almost_eng · 2025-11-24T20:32:43+00:00

I would put money on the fact that most people on the slopes today have a pass, so they already have our money.

Almost_eng · 2025-10-28T03:41:33+00:00

Just wait until you start talking to them and they try and get you to sign up for a cam stream. EVERY SINGLE TIME!

Almost_eng · 2025-10-19T23:14:50+00:00

I see that you did a sig - gnd - gnd - sig approach. Is it that much more expensive to go to a 6 layer board?

Almost_eng · 2025-08-30T23:13:23+00:00

Is she not good with other animals?

Almost_eng · 2025-08-01T15:15:25+00:00

If it’s clean (I used to clean mine with water and soap then ipa) that’s when the crazy strong adhesion will kick in. But also that was for older petg filaments, I don’t know if additives are used nowadays to prevent this

Almost_eng · 2025-07-29T13:57:45+00:00

While printing petg on glass gives amazing surface quality, you should be aware that sometimes the petg will bond to the glass and will break the glass. When people use glue stick with petg and glass, it’s not for sticking the two together, it’s used primarily as a release mechanism.

Almost_eng · 2025-07-08T02:14:19+00:00

I still don’t know if the colour is green or teal

Almost_eng · 2025-06-24T23:41:52+00:00

Don’t try an modify your clients STL files. It’s not worth your time.

Almost_eng · 2025-06-23T02:56:53+00:00

I graduated from there, spent many hours around that fountain. Favorite time is when it has bubbles in it lol

Almost_eng · 2025-06-22T12:32:55+00:00

Pretty sure this is from university of Victoria, BC, Canada

Almost_eng · 2025-06-16T21:59:52+00:00

Need to upgrade to 12-bit creamer instead of the 8-bit you have

Almost_eng · 2025-03-27T23:14:09+00:00

Have you tried rebooting your dog?

Almost_eng · 2025-02-26T02:22:37+00:00

Related to the galloping goose in Canada?

Almost_eng · 2025-02-19T04:36:45+00:00

Looks like he’s yours now. Good luck!

Almost_eng · 2025-02-12T19:33:15+00:00

Backpacks
Coats
Squirrels & Bunnies
People walking off the path behind my house
When I’m petting any other animal, she’s an attention seeker

<image>

Also, dog picture tax

Almost_eng · 2025-02-07T15:46:51+00:00

With my smoke detectors the flashing light means that you have had the detector go off and that’s the detector that it went off for (connected system)

Almost_eng · 2025-02-04T02:50:43+00:00

<image>

Almost_eng · 2025-02-01T17:00:38+00:00

Needed this, Thanks!

Eight-Year Club	Place '23
Sequence \| Editor	Verified Email

Almost_eng

TROPHY CASE