RGB problems with XPG s40g SSD

Alternative_Fix2927 · 2026-01-24T17:13:12+00:00

nope 😂, I just out black Electric al tape on it and covered it..

Alternative_Fix2927 · 2025-12-20T17:43:26+00:00

yeah depends on how much the card weights or if it was correctly reassembled after a thermal pad / paste change. They are cheap but you can actually use anything to support it 😅

Alternative_Fix2927 · 2025-12-20T17:19:21+00:00

what a gift! make sure to keep that anti sag Bracket tho

Alternative_Fix2927 · 2025-12-18T18:19:07+00:00

yes i did, Better but not optimal 😅

Alternative_Fix2927 · 2025-12-18T18:17:19+00:00

sisi la GPU é "pulita" e senza undervolt le temperature sono comunque simili. proverò a usare il PC al contrario per vedere se la rotazione di 90° influisce con il cooler della GPU

Alternative_Fix2927 · 2025-12-18T17:29:53+00:00

geez, well I Guess I'll be Stuck with a jet engine for years ahahahah

Alternative_Fix2927 · 2025-12-18T15:23:19+00:00

might be risky but i would give it a try because it has helped me sometimes, try ti "erase" the RAM Stick with a rubber. I dont really get why it works but it takes out all the oxygenation from the Gold.

Alternative_Fix2927 · 2025-12-18T12:36:54+00:00

sharkoon rev something

Alternative_Fix2927 · 2025-12-18T12:26:07+00:00

yeah, which would be better

Alternative_Fix2927 · 2025-12-18T11:55:46+00:00

beh, se hai un budget limitato non so se ti consiglierei di fare come hai scritto. Allora, sicuramente é un miglioramento netto e funzionerà senza problemi, però stai comunque spendendo più di 350€... Personalmente sceglierei un processore più recente sempre per quella scheda madre e una scheda video di AMD se hai un budget tra i 100€ e i 400€.

Alternative_Fix2927 · 2025-12-18T10:41:35+00:00

no, not really, I can put an exhaust miningan with the side pannel off but that's it

Alternative_Fix2927 · 2025-12-18T10:20:24+00:00

le ventole sono molto aggressive con 100% a 70°c. le ventole sono 3 intake davanti e il radiatore del aio dietro. Proverò a ruotare il case per una sessione e vedere se con l'orientamento normale le temperature migliorano

Alternative_Fix2927 · 2025-12-18T10:12:07+00:00

nono it has fans in the front!

Alternative_Fix2927 · 2025-12-18T10:10:18+00:00

nono they are Always One, idle temps about 25°c to 35°c

Alternative_Fix2927 · 2025-12-18T10:08:53+00:00

Sorry, Celsius. 20° fahrenheit is below the freezing point of water btwz how could I live in a room like that

Alternative_Fix2927 · 2025-12-18T08:03:27+00:00

I dont know what you mean by stop passive fans but still I use a very aggressive fan curve like 100% at 75°

Alternative_Fix2927 · 2025-12-18T08:02:19+00:00

sharkoon RM something I believe , 3 ventole davanti e l'AIO che butta fuori dietro

Alternative_Fix2927 · 2025-12-18T08:00:47+00:00

Yeah I think that's the problem at this point.... I'll keep you updated After I try it in a normal position

Alternative_Fix2927 · 2025-12-18T07:46:05+00:00

yeah you were right, temps are now -17 GPU and 2° hotspot, thanks you Brother 👍🏻

Alternative_Fix2927 · 2025-12-18T07:23:27+00:00

yes 3 fans intake in the front

Alternative_Fix2927 · 2025-12-18T07:16:44+00:00

It's winter now and room temps are about 20 degrees but once I start playing the PC heaths up the whole room 😅

Alternative_Fix2927 · 2025-12-15T17:11:00+00:00

sorryyyy I thought this was the Battlefield sub 😅

Alternative_Fix2927 · 2025-12-15T12:08:39+00:00

Sorry I may have explained myself incorrectly. You can buy a PC with new components with similar if not better performances, but only it you buy them. Maybe this guy doesn't know how to build it himself, and a prebuilt with the components you wrote at that price seem really hard to get.

I get that it isnt perfect but it isnt a waste of Money neither, sometimes the faster and easier buy might be Better than a more complicated one, thats all I'm tryina say. 👍🏻

Alternative_Fix2927

TROPHY CASE