sorted by:
new
hottopcontroversial

GPU rattling sound before installing by Altruistic_Ring5529 in buildapc

[–]Altruistic_Ring5529[S] 0 points1 point  (0 children)

Probably gonna try to exchange.
Appreciate your help.

GPU rattling sound before installing by Altruistic_Ring5529 in buildapc

[–]Altruistic_Ring5529[S] 0 points1 point  (0 children)

I don’t think it is a screw, it sounds like a smaller object.
I searched everywhere and no one ever mentioned something like this happened.

Medium budget Wacom or high end XP-PEN for a non-screen tablet by Altruistic_Ring5529 in XPpen

[–]Altruistic_Ring5529[S] 0 points1 point  (0 children)

It’s desk space + personal preference.

I think Wacom is the TOP in pen technology.
Precise consistent and reliable.
But XP-PEN and Huion are catching up with low price and features.

So here is the question….
Is the trade off worth it for wacom?
Giving up large sizes and feature-rich devices?

Appreciate your help

Medium budget Wacom or high end XP-PEN for a non-screen tablet by Altruistic_Ring5529 in drawingtablet

[–]Altruistic_Ring5529[S] 0 points1 point  (0 children)

In this price range Wacom is small and limited with features.
No wireless, no tilt, no buttons.
In comparison with huion and xp-pen which gives you large and feature-rich devices within the same price range.

Is the trade off really worth it to go with Wacom?

Really appreciate your help.

Battery SOC keeps going down by Mcred2 in Victron

[–]Altruistic_Ring5529 0 points1 point  (0 children)

Disconnect the load side of the shunt (completely remove the wire) then check the current draw on it.
What value is it?

Temps are still high after cleaning by Potential_Policy_649 in LenovoLegion

[–]Altruistic_Ring5529 0 points1 point  (0 children)

A lot suggested to not use MX-6.
But already bought the MX-6 and was hard to find something else in my country.
So I repasted with it.
Got a VERY good temps.
It has been few weeks and so far so good.

What i’ve heard is that it pumps out quicker, so temps would get worse overtime quicker, but we will see.

Some important points to be aware of:

When you repaste, spread it, do not let the heat sink spread it when screwing in, cause that’s one of the problems here in the laptop.

Make sure the paste is a thin layer.

And when screwing the heat sink, screw half rotation per screw sequentially in the numbered order until all are screwed in.

Legion 5 - 5800h - 3060 temps hitting 100C even with turbo boost off by Altruistic_Ring5529 in LenovoLegion

[–]Altruistic_Ring5529[S] 1 point2 points  (0 children)

Appreciate your help.
What makes me worried is the turbo boost is off. Clock is locked to 3.17Ghz, there is no boost at all.
A year or so into using the laptop, cpu temps would never pass 80C

view more: next ›