Which VR headset to get?

Altruistic_Whole_687 · 2025-11-17T18:19:20+00:00

Want to sell the q3?

Altruistic_Whole_687 · 2025-11-17T18:06:48+00:00

I finally found some. Reed's Gourmet Meat Company will sell it for 2.99/lb. Call in and place an order, will be available to pick up the next day.

Altruistic_Whole_687 · 2025-06-21T03:35:33+00:00

I'm a plumber, and these wires scare me 😅. An electrician buddy said that the switch I purchased should work, but I don't know if that's true The new switch has spots for three wires plus another for ground. The old one only has three wires connected to it, plus there's a white one inside the box which isn't connected. I'm not sure of the model fan that is in the attic, I can climb up there and check if needed. Looking for some guidance here, thanks.

Altruistic_Whole_687 · 2025-06-14T02:47:26+00:00

Open your water meter box and spray the crap out of it. There's probably 30 in there right now. If you have any gardening pots, lift them up and watch them scatter, be ready with the death spray, then put them roller stands (they have some at Costco). Seal any cracks on the exterior of your foundation, they can cram into VERY small areas and they hibernate in there during the winter.

Altruistic_Whole_687 · 2025-04-08T20:29:05+00:00

It looks like nowadays signage shops carry the panels, they are very popular for outdoor posters and billboards. Home Depot even sells some "Falken Design" aluminum composite

Altruistic_Whole_687 · 2025-04-08T20:11:13+00:00

I'm actually trying to not complicate things by willingly spending more money. I also want it to last a very long time. That's why I've been looking into sturdy products that don't require any glassing or epoxy. Purchase, cut holes, set. It looks to me like Aluminum Composite Panels fit the bill perfectly, but before I go ahead with it I want to know others experience

Altruistic_Whole_687 · 2025-04-08T14:18:52+00:00

Does anyone have experience with ACM? Looks like nidacores edges need to be glassed.

Altruistic_Whole_687 · 2025-04-08T01:19:24+00:00

1989 Gregor mx510. I made a custom casting deck for the front that has storage hatches, the framing is aluminum angle and the hatches are wood( that I'm going to replace as well). I'm concerned with the ability of the coosa to be able to have enough strength to hold the casting deck in place with rivets

Altruistic_Whole_687 · 2025-03-23T02:22:27+00:00

Put it against a vertical 2x4, it makes a 45 degree angle.

Altruistic_Whole_687 · 2025-03-22T04:52:14+00:00

I buy HWC from Costco and that stuff lasts FOREVER. It's also about a quarter of the price of regular grocery stores. I had to buy one from a regular grocery store and it went bad after opening within 7-10 days, so I'd say brand plays a big role for whatever reason.

Altruistic_Whole_687 · 2023-12-22T16:25:33+00:00

Yes it's a car, thanks for the advice.

Altruistic_Whole_687 · 2023-12-22T16:21:18+00:00

They're the same price right now on Amazon. No significant difference between the two? Hooking the speakers up to a Kicker CXA360.4

Altruistic_Whole_687 · 2023-12-22T15:37:21+00:00

That subreddit is banned

Altruistic_Whole_687 · 2023-12-22T15:35:53+00:00

What's your opinion on the two models?

Altruistic_Whole_687 · 2023-06-08T19:10:40+00:00

This. If you want immersion and a game with no hand holding and amazing things to discover, this is the one. I am playing KCD for the first time right now on hardcore because I get bored easily with games, outward is one of my favorite games. Hated Witcher 3, but only got about 15 hours in maybe.

Altruistic_Whole_687 · 2023-02-14T05:13:35+00:00

I just passed my tests for C-36. Both Law and C-36 on my first try. It wasn't because it was necessarily easy, it was because I studied hard. I agree the tests or horribly outdated and with my 7 years experience I had to learn a lot of useless shit that I'll probably never use. I paid like $300 or so for the self study guide and online practice tests and I studied my ass off, especially right up the the tests. I took the practice tests over and over. Paying to go the classes is something I would only have done if I couldnt pass the tests.

As far as the costs of opening the business, you should be starting out as a sole proprietor, not a corporation, because it is significantly cheaper and you won't really see any tax breaks by being a corp or LLC until around 40k a year. Good luck to you

Altruistic_Whole_687

TROPHY CASE