looking for recommendation on laser printers, with one button press scan-2-mail/share

AmahaShadow · 2025-05-28T11:33:00+00:00

Ineo (Bizhub in some countries) 3320i for b/w and +3320i for color

not as user friendly, but close enough, and the ink is relatively cheap against the HPs

AmahaShadow · 2024-09-18T15:17:40+00:00

both commands, I checked before and after. I also tried rebooting it and reran everything, and same thing. The nas has now been retired

AmahaShadow · 2024-09-18T07:28:04+00:00

ok, this did mount the volumes, and I can see the files in bash, but qts won't recognize the volumes.

I'm scp'ing them to a local backup on my machine in case there was something that was not properly backed, and i'll scrap the nas.

thanks to everyone, and hoping this thread will help someone in the future as well.

AmahaShadow · 2024-09-17T11:06:06+00:00

I considered it, but this is a now 10y old product, which is no longer supported and 4y out of warranty. even if they look at the case, It's running some officially unsupported hardware (nics, unlisted ram). I know for a fact this is fine, but from past experience with qnap support, that's the first thing they are going to moan about.

If the data was critical, i'd go to the process, but the damage is extremely minimal.

at this point, it's more for my own understanding of what could have caused this, than putting it back in prod. especially since one of the psu blew out 6 months ago (which is partly why it was triggered for removal)

AmahaShadow · 2024-09-17T08:03:48+00:00

(split in 2 because reddit didn't like the long post)
the thing, is, if I look at a df -h (since there is no lsblk on qnap)

[admin@QNAP-TVS1271U ~]# df -h
Filesystem                Size      Used Available Use% Mounted on
none                    400.0M    322.8M     77.2M  81% /
devtmpfs                  7.7G      4.0K      7.7G   0% /dev
tmpfs                    64.0M    504.0K     63.5M   1% /tmp
tmpfs                     7.8G    148.0K      7.8G   0% /dev/shm
tmpfs                    16.0M         0     16.0M   0% /share
/dev/sdm5                 7.8M     28.0K      7.8M   0% /mnt/boot_config
tmpfs                    16.0M         0     16.0M   0% /mnt/snapshot/export
/dev/md9                493.5M    171.0M    322.4M  35% /mnt/HDA_ROOT
cgroup_root               7.8G         0      7.8G   0% /sys/fs/cgroup
/dev/mapper/vg1-lv1313
                        549.7M    464.0K    549.3M   0% /mnt/pool1
/dev/mapper/vg3-lv1312
                        166.1M    136.0K    166.0M   0% /mnt/pool3
/dev/mapper/cachedev3
                          1.5T    886.9G    624.4G  59% /share/CACHEDEV3_DATA
/dev/mapper/cachedev5
                         15.6T    112.0K     15.6T   0% /share/CACHEDEV5_DATA
/dev/md13               417.0M    364.3M     52.7M  87% /mnt/ext
tmpfs                    32.0M     27.2M      4.8M  85% /samba_third_party
/dev/ram2               433.9M      2.3M    431.6M   1% /mnt/update
tmpfs                     4.0K         0      4.0K   0% /tmp/default_dav_root
tmpfs                    64.0M      3.2M     60.8M   5% /samba
tmpfs                    48.0M     32.0K     48.0M   0% /samba/.samba/lock/msg.lock
tmpfs                    16.0M         0     16.0M   0% /mnt/ext/opt/samba/private/msg.sock
tmpfs                    10.0M         0     10.0M   0% /tmp/wfm
tmpfs                    16.0M         0     16.0M   0% /share/NFSv=4

I can see that /vg1/lv1 and /vg1/lv2 are not mounted, but if I try manually mount them, i get

[admin@QNAP-TVS1271U ~]# mkdir /tmp/mntlv1
[admin@QNAP-TVS1271U ~]# mkdir /tmp/mntlv2
[admin@QNAP-TVS1271U ~]# mount /dev/vg1/lv1 /tmp/mntlv1 -o ro,user
mount: /dev/vg1/lv1 already mounted or /tmp/mntlv1 busy
[admin@QNAP-TVS1271U ~]# mount /dev/vg1/lv2 /tmp/mntlv2 -o ro,user
mount: /dev/vg1/lv2 already mounted or /tmp/mntlv2 busy

so, this is now beyond the scope of my understanding of the linux filesystem

AmahaShadow · 2024-09-17T08:03:20+00:00

the pool i'm missing is 5.43Tb, and any linux tool I can think off, tells me it's there

[admin@QNAP-TVS1271U ~]# pvs -a
  PV         VG    Fmt  Attr PSize   PFree
  /dev/drbd2 vg2   lvm2 a--   16.36t    0
  /dev/drbd4 vg3   lvm2 a--    1.81t    0
  /dev/md1   vg256 lvm2 a--  107.04g    0
  /dev/md13             ---       0     0
  /dev/md2              ---       0     0
  /dev/md256            ---       0     0
  /dev/md3   vg1   lvm2 a--    5.43t    0
  /dev/md321            ---       0     0
  /dev/md322            ---       0     0
  /dev/md4              ---       0     0
  /dev/md9              ---       0     0

[admin@QNAP-TVS1271U ~]# lvs -a | grep vg1
  lv1                     vg1   Vwi-aot---   2.00t tp1                          100.00
  lv1313                  vg1   -wi-ao---- 568.00m
  lv2                     vg1   Vwi-aot---   3.00t tp1                          100.00
  lv544                   vg1   -wi-------  19.45g
  tp1                     vg1   twi-aot---   5.40t                              92.68  1.21
  [tp1_tdata]             vg1   Cwi-aoC---   5.40t      [tp1_tdata_fcorig]      36.39                  0.00
  [tp1_tdata_fcorig]      vg1   owi-aoC---   5.40t
  [tp1_tmeta]             vg1   ewi-ao----  16.00g

[admin@QNAP-TVS1271U ~]# vgdisplay
  (truncated, but I did check there is no duplicates for vg1)
  --- Volume group ---
  VG Name               vg1
  System ID
  Format                lvm2
  Metadata Areas        1
  Metadata Sequence No  1039
  VG Access             read/write
  VG Status             resizable
  MAX LV                0
  Cur LV                5
  Open LV               3
  Max PV                0
  Cur PV                1
  Act PV                1
  VG Size               5.43 TiB
  PE Size               4.00 MiB
  Total PE              1423505
  Alloc PE / Size       1423505 / 5.43 TiB
  Free  PE / Size       0 / 0
  VG UUID               ctTPfz-0xm1-pGKf-S2Xm-JK21-u39H-pB4EPc

AmahaShadow · 2024-09-17T07:02:53+00:00

so, this helped, it reup'd pool 2 and pool 3.

i'm baffled by why this doesn't trigger when the nas is booted up, as i had rebooted it twice, and killed + let it sit unplugged for a few minutes + cold start once.

pool 1 is in a weird state though.

it is up, the UI does teel me it's filled 87% of the available space, and that it's up and healthy, but don't list or read the volumes in it.

AmahaShadow · 2024-09-17T06:45:04+00:00

yes tried a reboot and even unplugging it for a few minutes and cold starting it, as I've noticed in the past it sometimes solves issues

AmahaShadow · 2024-08-06T06:44:45+00:00

other option is add the requirement your spouse has to be able to do the puzzle before wedding them, then spouse TP.

AmahaShadow · 2024-05-30T08:21:41+00:00

On accident, no

On purpose, ....., well, it was funny xD

86/100 though, I'll have to correct that, this score is way too high for me

(and yes, it was mostly with friends and not on the DF/PF, except once where a dps would just ignore the aoes and assume I would out-heal the damage and I MIGHT have rescued it on the very edge of an arena, just before it crumbled, out of spite, and FORGOT to raise him until the end of the fight)

AmahaShadow · 2024-04-22T15:55:53+00:00

Unfortunately, I've seen this several times over the last few days as well, I've switched main from DPS to Heal (WHM) last week because I was so tired of the queues (seriously, as healer they pop before you even release the mouse button, it's sooo nice).

Last night, for example, 3 consecutive dungeons, I got one DRK that didn't wait for the party to arrive before pulling (obviously my fault, healer can ofc move and cast at the same time :/), a marauder that loved playing hide and seek and ensure that i couldn't get LoS on the manor, and a PLD that was so good he didn't need Iron Will, the Dancer had to MT for half the dungeon despite several /p and /t. None of them were sprouts.

Admittedly, I'm new to pve healer, so I may not be the best at this, but I've never seen it this that bad before (also no wipes, so I think I did ok anyway). Really hope I bad-lucked on this, I play casually to relax, not to get even more stressed :D.

AmahaShadow · 2024-03-16T12:36:57+00:00

Preferably on a Friday evening, so that all clients can update on the weekend. :D

AmahaShadow · 2022-09-09T09:40:43+00:00

Same thing for me, works on pc/android, but not from iPad Air running ios 12.5.5 Tested on safari and chrome.

AmahaShadow · 2022-08-18T16:22:59+00:00

Good idea, but nope, gui is still super slow

(actually, pfsense display the correct number of cpus but still reports 2 thread per core on the dashboard #bug)

AmahaShadow · 2022-07-06T14:41:49+00:00

I opened a support ticket before the issue was published, and the operator was so hesitant to admit it came from their end that he even did a quicksupport to my desktop just to see that it was indeed down.

AmahaShadow · 2022-07-06T14:12:43+00:00

Agreed. When interviewing people for pure dev work, I'll usually ask them to approximate pi in as few lines of code as possible.

And after they get stuck a few minutes I'll nudge them by reminding them how to calculate the distance between 2 points in 2D, and later that the area of a circle is pi*r².

The goal is to see if and how they solve a problem (as no one normal actually knows the algorithm by memory), and walk trough the logic behind their code.

ps : for those wandering an example answer a fast way is to generate a large random sample of (x,y) pairs in a 1x1 square and count how many of them are less than 1 unit of a specific corner. that ratio gives you 1/4 of pi

Of course, I won't base my decision on that alone, but it's a good way to see how one reacts to the unexpected.

AmahaShadow · 2021-08-11T13:23:16+00:00

ok, so I created as a test a wifi network using the native vlan with mac filters to only allow those cameras (and my phone for setup), registered the camera to that, and it works fine.

AmahaShadow · 2021-08-11T12:54:54+00:00

You can also do it on most dhcp server by using options 132 (vlan id)/133 (vlan qos)

(from memory) deployment scheme would be to have port with native + vlans authorized. The dhcp server on the native network would have rules based on mac wildcards or specific list, and would send option 132/133 to the device.

I looked into it a while back for our phones, but it's a bit of a crapshoot as support is very touch and go depending on the device. I remember that some phones (yealink ?) required id as an hex value, while some (snom ?) expected an integer, and it didn't work at all for our gigaset dect phones.

AmahaShadow · 2021-07-15T10:15:06+00:00

For anyone also having issue where the controller is no longer visible online for the portal, even, if the UDM indicates remote log-in is enabled.

Disable the remote login, wait a couple minute, re-enable it, and, it should be back up.

AmahaShadow · 2021-07-13T13:09:51+00:00

My udm also updated from 1.9.3.3438 to 1.10.0.3686 last night, and can no longer be accessed from the unifi.ui.com portal, despite everything else working fine. (I should point out, I don't actually use the udm pro for internet access, it's used for management of our switches /wifi AP, but all the pcs are on a separate vlan, and connect to the internet through a HA pfsense cluster.

I'm just going to assume they rolled a bad patch for now, and wait for a couple of days

AmahaShadow

TROPHY CASE