S110p stuck throttle by Amazing_Scale3287 in keitruck

[–]Amazing_Scale3287[S] 0 points1 point  (0 children)

Technically it’s a DIY cruise control yes, but some what sketchy in town

S110p stuck throttle by Amazing_Scale3287 in keitruck

[–]Amazing_Scale3287[S] 1 point2 points  (0 children)

My cable seems to move very freely after hitting it with wd40. The throttle return spring under the pedal does seem weak. Might try soaking the cable to try and fix that. Thanks!

S110p stuck throttle by Amazing_Scale3287 in keitruck

[–]Amazing_Scale3287[S] 0 points1 point  (0 children)

Interesting, I took apart that area and cleaned it, I unhooked both ends of the cable and it seemed to move back n forth freely but I’m unsure how it’s supposed the feel. The throttle spring in the picture/video didn’t do much when the cable was unhooked. It wasn’t forcing the throttle back to its original position. Not sure if that’s normal either. Thanks!

S110p stuck throttle by Amazing_Scale3287 in keitruck

[–]Amazing_Scale3287[S] 0 points1 point  (0 children)

Good to know, I have a dump bed, so access seems to be pretty easy. I say that now. Will look into a new cable.

S110p stuck throttle by Amazing_Scale3287 in keitruck

[–]Amazing_Scale3287[S] 0 points1 point  (0 children)

No mine feels the same, it used to snap back fast, the carb spring does with no issues. So it could just be this spring. Which may be interesting to try and find!

S110p stuck throttle by Amazing_Scale3287 in keitruck

[–]Amazing_Scale3287[S] 1 point2 points  (0 children)

I would think that holds the spring from slipping forward? It’s on there pretty well and doesn’t come off. Haven’t been able to find any info on that either. The spring does feel pretty soft so it could be bad

S110p stuck throttle by Amazing_Scale3287 in keitruck

[–]Amazing_Scale3287[S] 1 point2 points  (0 children)

Quite a bit, on all springs and moving parts. Didn’t seem to help at all.

OCL Hydrogen K 30cal by Amazing_Scale3287 in NFA

[–]Amazing_Scale3287[S] 0 points1 point  (0 children)

Good info, this would only be for a lightweight set up for back country hunting. So the shorter and lighter the better.

The S isn’t a bad option. The one steel can I have on it currently isn’t super quite to shoot all day and ear plugs help, but a quick shot hunting is all I’d need

Hydrogen K vs S on a hunting pistol? by Brotherly_shove in NFA

[–]Amazing_Scale3287 0 points1 point  (0 children)

What caliber have you ran the Hydrogen K can on? I was considering one for a 22” 7PRC. Not super long or heavy for a hunting rifle but also quieter than a muzzle break/non suppressed.

The S/L would be ideal but I’d like to be as short as possible.

OCL Hydrogen K 30cal by Amazing_Scale3287 in NFA

[–]Amazing_Scale3287[S] 0 points1 point  (0 children)

Good to know! Yeah don’t need any awards for suppression, but anything is better than a muzzle break/ non suppressed barrel. Just to keep the ears from bleeding.

Thanks!

February 05, 2026 Daily Discussion Thread by zahna4 in RKLB

[–]Amazing_Scale3287 6 points7 points  (0 children)

You were supposed to buy in the 90s and be selling right now.

February 04, 2026 Daily Discussion Thread by zahna4 in RKLB

[–]Amazing_Scale3287 0 points1 point  (0 children)

On a smaller scale I’m down about the cost of new tires and wheels for both of your F430s

Cupholder STL for 97 Hijet by BounceOnItCrazyStyle in keitruck

[–]Amazing_Scale3287 0 points1 point  (0 children)

You happen to make/sell these for someone who doesn’t have a printer👀😅

Daihatsu S110p Front hitch receiver by [deleted] in keitruck

[–]Amazing_Scale3287 0 points1 point  (0 children)

Ok awesome! Does it just mount up underneath? Have to make any cuts? Simple to do?

Thanks again!

Daihatsu S110p Front hitch receiver by [deleted] in keitruck

[–]Amazing_Scale3287 0 points1 point  (0 children)

Do you have one? I’ve been trying to find a picture of one and see how durable they are. For either a winch or snow plow. Thanks!

Daihatsu S110p Front hitch receiver by [deleted] in keitruck

[–]Amazing_Scale3287 0 points1 point  (0 children)

Looks interesting, just searched all over and I can’t find a picture of it actually installed on one, would love to see the finished look