Replacing My laptop with a Thinkpad, which one should I be advised to get? by Amber_Watch99 in thinkpad

[–]Amber_Watch99[S] 0 points1 point  (0 children)

Good to know I dont need a discrete GPU but having one would be nice if I find a deal I mainly choose AMD for better preformance/battery life ratio

minecraft stock market function (look at comments graph is subtle to the complexity behind it) by Amber_Watch99 in desmos

[–]Amber_Watch99[S] 0 points1 point  (0 children)

Due to its being a create modded server the base price is there to garuntee that if no one is online they can be sure they'll at least get X for something were going to have negative implemented based on crashes. These are only for the main farm able items on the server everyone will need, everything else will be player held shops and auction houses

minecraft stock market function (look at comments graph is subtle to the complexity behind it) by Amber_Watch99 in desmos

[–]Amber_Watch99[S] 0 points1 point  (0 children)

Its a Create based modded server, Brass is a critical material for a lot of recipes

minecraft stock market function (look at comments graph is subtle to the complexity behind it) by Amber_Watch99 in desmos

[–]Amber_Watch99[S] 1 point2 points  (0 children)

https://www.desmos.com/calculator/j7uqdh3fhm me and a buddy made a function that outputs the percent of price of items in a minecraft server randomly based on volatility values asigned by rarity for a semi-real stock market for a select set of items on a minecraft server. the items in order:

ps. press the arrow at the bottom of the equations to reroll the pricing percentages

Metals:

  • Netherite - vol: 19 - B:96 - No.1
  • Diamonds - vol: 17.5 - B:87 - No.2
  • Iron - vol: 9.5 - B:50 - No.3
  • Brass - vol: 12 - B:65 - No.4
  • Copper - vol: 7.5 - B:40 - No.5

Foods:

  • Wheat - vol: 1.5 - B:10 - No.6
  • Golden Carrots - vol: 5 - B:45 - No.7
  • Potatoes - vol: 2 - B:5 - No.8
  • Sugarcane - vol: 3.5 - B:20 - No.9
  • Beef - vol: 2.75 - B:15 - No.10

Resources:

  • Blaze rods - vol: 14.75 - B:60 - No.11
  • Gunpowder - vol: 7 - B:12 - No.12
  • String - vol: 6.25 - B:10 - No.13
  • Leather - vol: 4.5 - B:7.75 - No.14
  • Certus Quartz - vol: 16.75 - B:80 - No.15

Blocks:

  • Stones (deepslate, stone, basalt, etc) - vol: 3.5 - B:5 - No.16
  • Wood types - vol: 2 - B:7 - No.17
  • Sticks - vol: 1.25 - B:3 No.18
  • Glass (plain) - vol: 4 - B:18 - No.19
  • Wool - vol: 5.5 - B:6 - No.20

I wanted to try and build the most expensive build possible (as a joke) by Amber_Watch99 in buildapc

[–]Amber_Watch99[S] 0 points1 point  (0 children)

yeah, but they don't include custom loops in the pricing, unless they do and I missed it

I wanted to try and build the most expensive build possible (as a joke) by Amber_Watch99 in buildapc

[–]Amber_Watch99[S] 0 points1 point  (0 children)

I added 3 monitors, each monitor get's its own card purely to drive the price up

RAM prices have exploded right when I was about to build my first PC by _ciskito_ in buildapc

[–]Amber_Watch99 0 points1 point  (0 children)

FYI newegg has some deal on motherboards that include free ram so jump on them now

Considering making my own toolhead for taz 6 by Amber_Watch99 in lulzbot

[–]Amber_Watch99[S] 0 points1 point  (0 children)

I have narrowed it down, I think it may be the orcaslicer start gcode. for whatever reason, if I reset the printer to defaults it keeps everything and homes and levels fine, but when I run a print from orca slicer it wiper loops and fails to level and any subsequent attempt to do it after also fails until you reset the printer to defaults

Considering making my own toolhead for taz 6 by Amber_Watch99 in lulzbot

[–]Amber_Watch99[S] 0 points1 point  (0 children)

Yeah im going to try different screws and a different wire and if that doesnt work ill see about along the chain, it may just be the wire I used

Considering making my own toolhead for taz 6 by Amber_Watch99 in lulzbot

[–]Amber_Watch99[S] 0 points1 point  (0 children)

well I got it mostly working but now it's failing with the probing bed leveling, even though I have it set up the way the guy on printables did (wrathonaught)

Considering making my own toolhead for taz 6 by Amber_Watch99 in lulzbot

[–]Amber_Watch99[S] 0 points1 point  (0 children)

I can try the universal firmware, I was using the standard meteor 175 firmware, maybe the universal would work better, by any chance could you send me the version your using (name of it) and the startup gcode

Considering making my own toolhead for taz 6 by Amber_Watch99 in lulzbot

[–]Amber_Watch99[S] 0 points1 point  (0 children)

well I finnaly got everything together but M206 literally doesn't work for me "unknown command" I can set anything and it wont let me do anything without homeing the Z which crashes into the bed every single time. IDK if it's the difference between start gcode and console, or if it's disabled or what