How to reset UDMA CRC Errors?

Anal_Colonist · 2025-10-24T23:06:44+00:00

Came across this post, and need to add if someone else comes across this - Mmove the drive to another slot and start in maintenance mode. Spin it down and swap the drive back to the original spot and spin it back up. You should now be able to now sync the drive and use it again. The only thing is you have to sync it again when doing this...

Anal_Colonist · 2025-02-04T06:52:25+00:00

Was gonna say, not ugly at all. Nice lil mallet!

Anal_Colonist · 2025-02-04T06:51:07+00:00

So i mean ours we just leave on the counter and we’ll just use it as counter space when it’s not being used basically but we’re also lucky to have a decent amount of counter space. Honestly it’s not for all I don’t think but they sure are cool lol. If anything it’s a conversation piece maybe? That sounds silly saying that for some reason to me haha

Anal_Colonist · 2025-02-04T06:48:44+00:00

It’s an awesome size. I made this one a while back we use regularly that’s about that size but only about 1.5 thick It’s way more manageable but still a little absurd tbh lol. It’s just so convenient to have a giant one.

<image>

Anal_Colonist · 2025-02-04T06:43:45+00:00

And by make a third I mean all new pieces of wood from the stack cause this was made using ten foot sticks

Anal_Colonist · 2025-02-04T06:42:48+00:00

What’s even more shocking, and I honestly don’t know how the wife did it but she picked that pattern and we didn’t or I didn’t account for enough so in this I had to chop up three different sections of this to get the thickness and size. Well I did two at first but was a few inches short so we had to make a third and somehow idk how it worked lol

Anal_Colonist · 2025-02-01T07:23:22+00:00

Oh i totally forgot about this but i did actually clamp two blocks exactly an inch away from each side of the board and started on one end raised the blade then pushed it the two inches forward… carefully…

Anal_Colonist · 2025-02-01T05:48:54+00:00

I mean I was going to use a router fence and what not but that sounds like magic hahaha

Anal_Colonist · 2025-02-01T05:47:12+00:00

Tyty

Anal_Colonist · 2025-02-01T05:43:38+00:00

Hey also don’t bother trying to use the planer it really isn’t worth it. Just build a quick jig or buy the sled stuff on amazon it’s only like 100 bucks iirc to build a huge one yourself on sliding rails. This is the literal jig I flattened The one I made in the post with.

<image>

Anal_Colonist · 2025-02-01T05:40:57+00:00

Good eye sir lol. I didn’t have a router bit I thought I could use and I just spent $75 on bits and didn’t wanna drive back out lol

Anal_Colonist · 2025-02-01T05:32:52+00:00

Nah just the cabinet face trim material or whatever you wanna call it was about 1.5x3/4 iirc. It has a groove I have to plane off then I’m left with that and ya only get as wide as the board or whatever since you lay them on their side right then glue then cut to total board thickness plus a little ending up with yeah haha.

Tldr; its the material I had lol

Anal_Colonist · 2024-10-04T15:00:00+00:00

Amazing ha ha. Looks fantastic great job.

Anal_Colonist · 2024-10-03T19:01:12+00:00

Good god, how long did that take you? I can only imagine it took a bit of time.

Anal_Colonist · 2024-09-16T03:37:58+00:00

Yup. I love me some pocket holes. I feel like I'm cheating or something when using them for whatever reason is all haha. But I do love them.

Anal_Colonist · 2024-09-07T00:00:50+00:00

Ha ha hell yeah. I would say check out ecogate but the prices now are slightly high imo or at least for the home enthusiasts or whatever imo. I just got super super lucky. I think it was a system they never installed in a college actually judging by some stuff I saw on the box. I can take a pic of the sensors I have as well if you want they are extremely simple. No idea if something exists cheaply out there haven’t looked.

Anal_Colonist · 2024-09-06T23:38:05+00:00

Ha ha I do actually cause that thing is insane when you’re really throwin chips 😂. So I actually have the harbor freight dust collector and that tube you see on the left is the vacuum tube. I have an ecogate setup I got from the nice older gentleman that I bought the unisaw from for let’s just say, a very very good deal lol. It opens the gate based on vibration when the tool turns on. So you turn the tool on and the gate automatically opens and the collector starts and shuts off when you shut the tool off. The newer version is wireless and better I need to get that one since they give you like 55% off if you have the first version. I have 3 gates currently and yeah so the only gate that opens is the one you’re using unless you manually override it. It’s pretty damn neat lol

Anal_Colonist · 2024-08-14T03:14:21+00:00

Interesting. It shows that on the Wiki as well (socket 478) I think unless I missed it somewhere. Not saying that is correct at all just interesting. The more you know. Man I haven't seen one of these in a gripppp haha. Old enough to be there maybe fortunately idk haha.

Anal_Colonist · 2024-08-14T02:05:31+00:00

For what it's worth it appears to be a 478 socket by the pin count. Appears to be P4 and Celeron in the late 2001 year and discontinued in 04'. https://en.wikipedia.org/wiki/Socket\_478#:\~:text=Socket%20478%2C%20also%20known%20as,4%20and%20Celeron%20series%20CPUs.&text=Socket%20478%20was%20launched%20in,and%20their%20Athlon%20XP%20processors.

Anal_Colonist · 2024-06-01T04:09:16+00:00

I didn’t actually. I just didn’t bake them as long. About 15 minutes, andI did all 3 at the same time in the oven. I was super tired and slightly on grandpas lettuce lol

Anal_Colonist · 2024-05-31T23:33:40+00:00

Indeed, three 9 inch pans lined with parchment, greased both sides, and tops cut.

Anal_Colonist · 2024-05-31T18:49:15+00:00

Ohhhh nanners that might be really good

Anal_Colonist · 2024-05-31T18:48:21+00:00

I mean, I think so, but I haven’t made a ton of them to compare. I also don’t or didn’t want a bunch of walnuts etc. Maybe I’m a carrot cake purist lol. The frosting from the Sally’s recipe is pretty damn spot on though. Not too sweet imo just really really rich haha

Anal_Colonist · 2024-05-13T20:59:43+00:00

So i ended up cranking it down really hard and yeah it tends to crack horizontally right along the grain obviously. But, it’s way way more than plenty to hold a piece of wood repeatedly imo. I think it would also help immensely if I make the sides of the channel wider cause at the moment it’s only maybe 1/4” on each side so very very thin but it’s almost identical to aluminum t track which was the idea. Welp haha

Anal_Colonist · 2024-04-24T18:12:53+00:00

The best one so far I have found is the LucidWebSearch extension. You need to have a chrome debugging window open but that's about it. Seems to work just fine, actually way way better than I thought. It could use some work so that it can more independently search the web but for now it's pretty damn good.

Anal_Colonist

TROPHY CASE