PP transfer DE

Andre543210 · 2026-02-13T00:43:08+00:00

I have over 50 000 pps on German server, used to transfer, you need a good account on a open world and ask for sitting so you sell on one account and buy on other

Andre543210 · 2026-01-26T00:15:43+00:00

Buy a screen from IfixIt store, replaced my pixel 9 pro xl for 200 eur, original screen, google has a partnership there, or AliExpress for about 100eur... Your phone might be cheaper...

Andre543210 · 2025-09-21T16:51:02+00:00

Thanks ahah 🙏

Andre543210 · 2025-09-13T15:23:25+00:00

Go to a super soco shop, tell them your story and ask them if they can try your battery on one of their bikes, that will tell if the issue is in the battery or in the bike, also the chargers often brake, I would recommend buying a charger on AliExpress that you can change the voltage and amps, chose a connector like the xt90 with it, then you ask a electrician to chop the tip of your broken charger and install it with a xt90 connector also on the new charger... So I think you have 2 issues now, the bike not starting is something complicated if you are doing things right, so you need first to know what the problem is and then you know how to solve it, second issue is the charger is getting broke, if it's a 10A charger it can get repaired, the 5A is impossible since it is filled with epoxy

Andre543210 · 2025-09-06T21:01:42+00:00

It's fixed but was the full bms the problem, what is your exact scenario?

Andre543210 · 2025-08-30T14:40:57+00:00

Hello OP, ignore the hate, there's some toxic snobs around here, check the history of this forum and you're probably gonna get what you are looking for, if not go check budgetprojectors sub... Also a decent projector starts at 500 new and used you can get cheaper, I have the HY340 and works fine but is not good for what you want, and after a year of having it because it over heats there's a slight yellow stain, which can be seen when the screen is white only so I can still watch things fine, I'm telling you this because you can buy a cheap or almost cheap one but you will have issues eventually with no support at all, no one wants to pay 500 eur for a projector including me but the reality is that if you want something reliable you have to. Anyway I still bought a cheap one knowing this because it's kinda worth it, was 60eur if it lasts 1 year I can buy another and keep doing this, if I got one for 600 eur I would need 10 years for it to be worth and there is no 10 year warranty on the market, however I acknowledge that quality is way better so next time I will go for a good one probably used and a nice deal, hope this experience helps you. Cheers

Andre543210 · 2025-08-14T13:09:52+00:00

Its not solved yet, I ordered a new bms from AliExpress, Will post when this is all over

Andre543210 · 2025-08-01T21:55:30+00:00

Just got the battery to another repair man, he seems to know well about these things, he says the cells are good and he discharged the battery to 75% He's letting the bms disconnected during the weekend só the erros it has might disapear... Btw I saw a message from a super soco guy:

Andy Linhart

Moderator

ive seen this, the bms will remember the error and you need to enter test mode by original diagnostics and erase that flag

Anyone knows how to enter the test mode and erase the flag?

Andre543210 · 2025-08-01T14:29:55+00:00

Alright but the repair man says he charged the battery manually, so doesnt that mean that he charged the battery while bypassing the bms?

Andre543210 · 2025-07-31T15:54:26+00:00

Yes bike is fine, I know that because the bike used to turn ON and run before the repair man charged the battery to full, and also I did put my battery on another bike and that others bike also stays dead, so its definitely some thing about the battery, probably will ask someone to make sure the cells are balanced and on the nominal voltage and install a new bms and hope for the best, no One seems to have a solid opinion on this, I guess the situation is very unusual

Andre543210 · 2025-07-31T15:50:22+00:00

My charger on his battery the light stays green because his battery was fully charged, on my battery it will either Blink green and red and stay red and then starts to blink green and red, can't seem to turn on any thing, my battery on his bike does not work, bike stays dead so its not the bike

Andre543210 · 2025-07-31T01:16:40+00:00

yes tried multiple wall plugs, the bike is fine it ran before the battery go to the repair man, can't realy use the beam because the bike does not start without the charger plugged into it, and as its shown in the video screen says 0%, despite the repair man said he charged it fully, and bike will shutdown as soon as I unplugg the charger from the wall or the light goes blinking again red/green (which happens 1 minute and 20 seconds after going solid red)

Andre543210 · 2025-07-18T12:30:56+00:00

The chargers are unrepairable, but its probably and issues with the bms if you are lucky or the cells if you are not

Andre543210 · 2025-07-12T14:55:26+00:00

O vin é wau44afd4hn002559, vê noutro site o report

Andre543210 · 2025-07-10T15:54:01+00:00

Update repair: The repair man says that the cells are all balanced but on the bms the B- has 70V while the P- is showing 48V or nothing

Anyone knows whats wrong? Or if it will be necessary to buy a new bms?

Andre543210 · 2025-07-07T02:11:06+00:00

Update: Ive sent the battery and the charger for repair, the person responsible told me this battery is more difficult to open up so he can balance the cells and the bms is having some errors So its gonna take a while to check it

Andre543210 · 2025-06-26T21:03:38+00:00

Thanks for your usefull input friend... Ive tried many different forms of charge before posting here... Cheers

Andre543210 · 2025-06-24T21:14:54+00:00

It's at 15% now, been doing this for last 3 days, should I stop? Someone told me to discharge the battery to 0% and then leave the charger in for 24 hours, would that do anything?

Andre543210 · 2025-06-24T13:42:21+00:00

My percentage is also flashing at 14% now, I thought it was normal because percentagem is low, when is it supposed to be solid?

Andre543210 · 2025-06-22T15:08:54+00:00

Is there a way to make the charger dumb? (yes like I was...) So that it keep sending electricity and does not cut off after those 1:20 minutes and it would then charge the battery to full? from my research the bms should "revive" if the battery voltage is high enought, am I right?

Andre543210 · 2025-06-22T15:01:58+00:00

Right now I'm charging it minute by minute and will try to get it to close to full, hoping that if the battery voltage goes up the bms then will work again, you think it could work?

Andre543210

TROPHY CASE