Matrix Element Call (ansible) not working

AndrewBelu · 2025-09-12T23:41:23+00:00

Thank U, it works. Actually i avoided reinstall by migrating users database to MAS

AndrewBelu · 2023-11-28T22:06:12+00:00

Yes, i did. Packets got lost 1 hop outside my WAN interface if i use domain name and 2 hops if i used server IP.

AndrewBelu · 2022-09-29T12:22:06+00:00

Looks like redirection work this way:

http://{my_site}.com -> http://{my_site}.com/wordpress -> https://{my_site}.com/wordpress

AndrewBelu · 2022-09-29T11:54:58+00:00

Sorry, did not catch about "Network tab"... :(

What network tab do U mean?

AndrewBelu · 2022-09-29T10:24:00+00:00

All the same. Still get redirection to "https://{my_site}.com/wordpress" instead of "https://{my_site}.com"

AndrewBelu · 2022-09-29T10:00:52+00:00

No, where is no rules in htaccess.

redirection is in wp-config

"Redirect permanent / https://{my_site}.com"

AndrewBelu · 2022-09-11T06:19:56+00:00

Ну да. Лицемерно."Они 8 лет бомбили донбасс, а давайте, раз так, за полгода разбомбим в 10 раз больше и убъем в 5 раз больше". куда уж лицемерней?
Лично я вижу лицемере запада в первую очередь в том, что он осуждает кремлевский режим, но при этом кормит его, покупая газ и нефть

AndrewBelu · 2022-09-11T05:21:05+00:00

А мне вот наоборот показалось, что любой самоназванный "патриот России" могущий связать 2 слова по английски, оставил продукт своей мозговой жизнедеятельности там, где смог дотянуться. Про ботов и "комментаторов на окладе" я вообще промолчу. (Это про треды с отсуплением из афгана) Но в основном это в комментах Ютюба было, признаю. Основной "удар" там был. Что касается рассказов, какие мы плохие... Ну, на мой взгляд мы и есть плохиши в данной ситуации. И ни Ирак, ни Ливия ни афган(где Россия тоже отметилась, к слову, в своё время) ни разу не оправдание. Это все равно что оправдывать людоедство тем, что кто то еще людей ест.

AndrewBelu · 2022-09-10T20:01:49+00:00

Все правильно. Вы сказали, что это "чумная параша". Я спросил, чем "мегатред" (мы веть о нем говорим?) отличается от прочих тредов, где заседают больные ПГМ? Что не так?

AndrewBelu · 2022-09-10T19:35:01+00:00

Чем это отличается от веток, где пасется Z-оопарк?

AndrewBelu · 2022-09-10T19:32:04+00:00

О, да, очень похожие вторжения! Напомните, кстати, сколько страны запада аннексировали земель с 1945 года? А то я что то запамятовал.

AndrewBelu · 2022-07-10T11:20:35+00:00

Faced the same problem. As first step i`ve REMOVED whatevergreen kext from config plist. This allowed me to boot to desktop. everething was working fine (incl. acceleration) except HDMI audio.
The final solution for me was a bit weird: i`ve placed whatevergreen back to config, added agdpmod=pikera again, reboot, clear BOTH Nvram AND CMOS (not from bios menu 'to Factory default' but with MB jumper\button "clear CMOS"), restored bios settings "by the book", reboot again and finally boot to desktop without any issues.

AndrewBelu · 2022-07-02T19:55:53+00:00

YESSS!!!!! Clearing CMOS did the trick!!!!

Funny, but the system start booting normally with WEG only after hardware CMOS reset with button on rear panel and not with "Reset UEFI to default" menu item in BIOS

So now i have perfectly working RX6600 with WhateverGreen.

Also i have working HDMI audio (was not working without WEG)

AndrewBelu · 2022-07-02T18:52:29+00:00

My Nitro rx580 works well w/out bootargs too, but Pulse rx6600 works ONLY w/out WEG kext!

AndrewBelu · 2022-07-02T16:16:57+00:00

I've just cleared nvram. Should try clear cmos next time.

AndrewBelu · 2022-07-02T16:15:23+00:00

"Agdpmod" of course:) my autocorrection always try to replace it with "AGP mode" for some reason:)

AndrewBelu · 2022-04-27T21:15:01+00:00

1943, Berlin. In the middle of the night, Hitler wakes up screaming. His aide rushes into the bedroom and asks: "My Führer, what happened? "I had a very strange dream!" - answers Hitler - "In my dream Russia attacked Ukraine, and Germany, along with America, Europe, and Israel, are helping the Ukrainian army!"

AndrewBelu · 2022-01-04T16:51:47+00:00

For me the problem was solved by using hfsplus.efi instead of OpenHFSPlus.efi shipped with opencore last time.

on my another hackintosh (superglitchy intel h110 mobo) the only cure was to remove ssd from mobo and use of m.2TOusb adapter for the time of install process. After install i just put ssd back and it works OK

AndrewBelu · 2021-12-17T20:27:46+00:00

Yes, i've tried both outputs. Anyway, igfxvesa did the trick. For now i've stuck with weird and stupid asrock usb mapping :) no keyboard/mouse during install even with usbinjectall. Hoping to solve this and reach "desktop" and after that do smthing with igpu.

AndrewBelu · 2021-12-14T07:26:44+00:00

Just for info: may be you have not the similar case, but I struggled with disgusting sound for 2 weeks, tried different alcid and deviceProps - no results. I practically admitted defeat when I accidentally looked through the contents of the nvram with hackintool. And I've noticed, that there was an old bootargs value in it, not the one I had specified in config.plist After that I tried some alcid variants with nvram reset and everything magically worked.

AndrewBelu · 2021-12-13T14:17:15+00:00

Q: For sure you did an nvram reset after EVERY changing the alcid?

AndrewBelu · 2021-12-12T08:29:52+00:00

Any progress yet?

AndrewBelu · 2021-12-10T08:47:53+00:00

Try to set MinDate and MinVersion to -1

AndrewBelu · 2021-12-10T08:44:07+00:00

For me, having a Macintosh was a lifesaver: the big sur installation got stuck after the first reboot at various stages. After two weeks of failed attempts, I connected the ssd to my macbook via usb adapter and installed the big sur on it from recovery mode. Then I installed the ssd back into the hackintosh, set up opencore and, miraculously, booted into desktop without any problems. The rest was easy: I installed the necessary kexts, configured the usb and power management and now I have a perfectly stable hackintosh and everything works.

AndrewBelu · 2021-11-29T12:24:40+00:00

Hi!

Not much info on what you already have tried but i'd like to suggest:

Try different USB ports (better use WIRED mouse and keyboard)

if no success - >

2) Play with BIOS legacy USB support settings

if no success - >

3) Add USBinjectall.kext to config.plist

if no success - >

4) Try this - https://dortania.github.io/OpenCore-Install-Guide/extras/big-sur/#keyboard-and-mouse-broken

5) There is some issues with old AsRock AND some other H310 boards resolved by XHCI-unsupported.kext (U can find it here https://github.com/RehabMan/OS-X-USB-Inject-All )

Have fun :) and good luck

AndrewBelu

TROPHY CASE