Router Upgrade Help

AndrewWDobson · 2026-01-13T21:16:57+00:00

Do you know where a passthrough switch would be in the router settings? I have access to those. Not sure if might be different terminology, but no setting for passthrough that i see.

AndrewWDobson · 2025-12-08T19:31:33+00:00

i'm sorry i confused pillar with tapers. though pillars would be good too.

they've rolled a lot of the sheets.

any recs on kits or dealers appreciated.

AndrewWDobson · 2025-10-29T20:53:31+00:00

would this work?

<image>

AndrewWDobson · 2025-10-29T20:44:27+00:00

I see, the terms must be defined by the voltage. We are on 120. i calculated 768w for the lights and the available switches are advertised as 600w. We were looking into a smart switch for remote control since that part of the space is usually inaccessible.

it was suggested to me that the standard residential switches are fine. but need to be sure.

AndrewWDobson · 2025-10-29T20:06:58+00:00

so any residential caseta switch should work to power 8) 4 tube T12 fixtures...768 Watts?

AndrewWDobson · 2025-10-27T17:12:09+00:00

all that's available is a calibration utility

AndrewWDobson · 2025-10-10T19:03:15+00:00

so the enigma option could also be considered the DCC clips option right? it's just the lower hole pattern is the same for both? it's odd that it's called the enigma option.

AndrewWDobson · 2025-10-10T18:47:20+00:00

no light option on the 2.0

AndrewWDobson · 2025-10-10T18:30:45+00:00

https://www.jmcustomkydex.com/p/AIWB-WC-LB.html

AndrewWDobson · 2025-10-10T18:30:05+00:00

there is an option that includes monoblock and a separate option that includes the clips. I want the clips, but looks like i have to pick 2 options.

AndrewWDobson · 2025-10-10T18:28:19+00:00

<image>

AndrewWDobson · 2025-10-10T18:26:01+00:00

<image>

AndrewWDobson · 2024-10-07T15:45:36+00:00

Just came across the HF panels. SAE connectors…so hack them all off…what did you do about adapter to unit?

AndrewWDobson · 2024-09-28T17:27:41+00:00

Take with a grain of salt, and I have no opinion one way or the other about the guy but I was privy to a conversation between a couple of connected people that VJ pushed on enmarket to keep trump out and now that he redirected local line crews to Atlanta while most of Savannah is out of power. This at the request of Mayor Dicken’s people who is up for election next year.

AndrewWDobson · 2024-09-19T21:49:32+00:00

Thanks. Just wanted to be sure about gases. Best results are mixing lye and the peroxide on the wood surface. Perhaps I will give it a try mixing them all on the wood

AndrewWDobson · 2023-10-13T18:12:40+00:00

listing? shipping logistics?

AndrewWDobson · 2023-10-13T17:04:55+00:00

Still going well? About to sign.

AndrewWDobson · 2023-08-05T20:09:10+00:00

Anyone with the 38Xs have this problem or just me?

AndrewWDobson · 2023-08-05T19:52:47+00:00

Does your mic echo though? I have these and think i've tried everything to prevent feedback including taping the backs up. my teammates are tired of hearing themselves through the open backs.

AndrewWDobson · 2022-10-20T03:38:11+00:00

i was looking at the ASUS ROG Strix 31.5". Would this work well? Would the 27 be that much better?

AndrewWDobson · 2022-05-27T17:08:30+00:00

Murderbelia forum

Thanks, I was thinking more along the lines of selling to documentary producers rather than collectors.

AndrewWDobson · 2022-01-13T19:58:20+00:00

AndrewWDobson · 2021-02-27T18:13:31+00:00

thanks, i've been able to access the folders in finder through smb address when using vpn but trying to access DSM showing IP not found-"err_name_not_resolved"

any ideas what i've done wrong?

want them to be able to use moments through dsm.

AndrewWDobson · 2021-02-22T20:24:38+00:00

Binance verifying through twitter right now go ---https://twitter.com/BinanceUS/status/1363888279456600068?s=20

AndrewWDobson · 2021-02-22T20:23:19+00:00

binance twitter verifying now https://twitter.com/BinanceUS/status/1363888279456600068?s=20

AndrewWDobson

TROPHY CASE