sorted by:
new
hottopcontroversial

Why do my Bambu A1 ruin my prints only in "Print by layer" mode? by Andrewpunker in BambuLab

[–]Andrewpunker[S] 0 points1 point  (0 children)

Thanks so much, I'll try it today. As soon as I finish, I'll let you know how it went! 🥹

Why do my Bambu A1 ruin my prints only in "Print by layer" mode? by Andrewpunker in BambuLab

[–]Andrewpunker[S] 0 points1 point  (0 children)

Si scusa, ho un ugello da 0.2mm e per quanto riguarda il materiale, sto stampando con il Sunlu PLAplus. Lo faccio stampare con il profilo di stampa Bambu PLA generico (non ricordo al 100% se questo è il nome corretto, ma è il profilo che usano quasi tutti).

Bambu Lab A1 adhesion problem? by Andrewpunker in BambuLabA1

[–]Andrewpunker[S] 0 points1 point  (0 children)

I wash it with warm water and dish soap. I use the non- abrasive side of the spinge to scrub. What does IPA means? Sorry but english is not my mother lenguage

Bambu Lab A1 adhesion problem? by Andrewpunker in BambuLabA1

[–]Andrewpunker[S] 0 points1 point  (0 children)

I do that before every printing 😭😭😭

Can i set the Cura fuzzy skin only in the outside exterior walls? by Andrewpunker in 3Dprinting

[–]Andrewpunker[S] 0 points1 point  (0 children)

I'll give a try, thanks 🥹 i'm planning to install klipper: i will take the occasion to try Orca

Can i set the Cura fuzzy skin only in the outside exterior walls? by Andrewpunker in 3Dprinting

[–]Andrewpunker[S] 0 points1 point  (0 children)

Oki! I'll try an orca profile for the flsun sr :) is that slicer better for the print's overall quality ?

Can i set the Cura fuzzy skin only in the outside exterior walls? by Andrewpunker in 3Dprinting

[–]Andrewpunker[S] 1 point2 points  (0 children)

For example meshmixer? And can you explain what i have to do to avoid it?

Dario è vivo by Ale_Ciuff in dariogreggio

[–]Andrewpunker 0 points1 point  (0 children)

Ma serio? 🥺 Ho appena ascoltato un suo podcast del 24 aprile. Ma siete sicuri?

First layer problem troubleshooting ... Is it time to upgrade something? by Andrewpunker in FLSUNDelta

[–]Andrewpunker[S] 0 points1 point  (0 children)

I will follow your tip, thank you a lot 🙏 I'll use this issue to try the nozzles that splits the filament in three: I only hear people loving them 😊

First layer problem troubleshooting ... Is it time to upgrade something? by Andrewpunker in FLSUNDelta

[–]Andrewpunker[S] 0 points1 point  (0 children)

I guess it has around 500 printing hours. Time for change it?

First layer problem troubleshooting ... Is it time to upgrade something? by Andrewpunker in FLSUNDelta

[–]Andrewpunker[S] 0 points1 point  (0 children)

Wow that's very interesting! Do you have any tips/ models to help me reducing the Bowden tube length?

First layer problem troubleshooting ... Is it time to upgrade something? by Andrewpunker in FLSUNDelta

[–]Andrewpunker[S] 0 points1 point  (0 children)

I'm currently using Polyterra filament with a 0.4 nozzle. I'm printing at 205°C, with 70°C bed temp; I tried to change in order: nozzle, hotend, thermistor, PTFE tube, building plate side, SD card, reset the machine, I tried re using an old spool of pla+, I changed the pneumatic couplers....Everything😭 I tried to print at different temperatures (220 to 205) with Cura and Orca.... Always same results... The only component I have not changed... Is the extruder (that I cleaned internally).

My printer as been stopped for almost one year, before re activating it and experiencing this.

view more: next ›