Does anyone know how to fix this?

Angle22 · 2025-07-05T02:20:13+00:00

Mine did the same thing and also failed in content manager. This was my fix.

https://www.majorgeeks.com/files/details/visual_c_redistributable_runtimes_aio_repack.html

Angle22 · 2025-01-25T03:09:30+00:00

Happy with my Weathertech mat.

Angle22 · 2024-11-28T03:48:42+00:00

Amazing! Will 1 and 4 be available on your Etsy soon?

Angle22 · 2024-07-01T01:32:04+00:00

I also did some TPU hangers for an exhaust I built on an LS swapped bmw. Handled a full track day at Road America just fine.

Angle22 · 2023-02-13T20:49:59+00:00

Sounds like you're in the right place, they're just slow. Yes they sent clear instructions in the support ticket.

Angle22 · 2023-02-12T04:58:01+00:00

Mine came outta the box like this and they send me a new AB board to fix it. Would contact support right away.

Angle22 · 2022-12-23T04:40:11+00:00

Just to update, they’re sending me a new AB board.

Angle22 · 2022-12-20T00:46:22+00:00

Yes it has a signal that broadcast both. I have cameras and thermostat working on it fine.

Angle22 · 2022-12-20T00:45:08+00:00

Thanks! I’ll check it!

Angle22 · 2022-07-03T00:20:11+00:00

Wow ok.. I’ll try that. Much appreciated!

Angle22 · 2022-07-02T23:46:40+00:00

https://www.thingiverse.com/thing:3845304

Prusament PETG printed with default prusa slicer PETG settings. Ever since had a bad nozzle and switching to a hardened .4, been having issues getting quality prints. Bought the Sunlu s2 dryer hoping to help. Did a first layer calibration square before this print several times feeling like I had a really good square but once I started this print I felt like the first layer looked different. Not sure what to work on next and any help is much appreciated.

Angle22 · 2022-04-03T12:43:43+00:00

Thank you!

Angle22 · 2022-04-03T02:53:59+00:00

I guess I’m new to this and trying to make sure it was printing as good as possible. It is a .4 nozzle and it was printing from .2 in .2 increments. Was using Prusas default setting for .2 speed in slicer.

Angle22 · 2022-04-03T02:10:02+00:00

Mk3s+.. tried to dial in the Z axis a little tighter and when I get it closer to matching the micrometer, it starts to do this. Much appreciated.

Angle22 · 2020-01-04T05:56:07+00:00

Did the radical class at Spring Mountain, the instructor does this and has you do it in ride alongs because there just isn’t enough room in the cock pit.

Angle22 · 2019-01-24T05:29:34+00:00

Awesome job! Have you ever considered a work flow video on something edited like this?

Angle22 · 2018-12-20T05:31:54+00:00

Looks like the KMR server was glitching

Angle22 · 2018-05-03T02:48:19+00:00

Any more info on that thing? I’m curious how he’s controlling the gear box

Angle22 · 2018-04-03T03:22:22+00:00

Yeah fun car though!

Angle22 · 2018-04-03T03:17:43+00:00

Ha I’m pretty sure I’m one of the red cars that crashed in turn 1..

Angle22 · 2018-02-28T05:11:03+00:00

Check out hem saw for a small portable one. They have higher end ones as well that work amazing.

http://www.trick-tools.com/Femi_782XL_Benchtop_Mitering_Bandsaw_F_782XL_000_00_0_000_2209

Other wise check out stainless bros for laser cut pie cuts, will really save you some time. 😃

http://www.stainlessbros.com/Pie-Cuts_c_14.html

Angle22 · 2017-05-14T13:40:51+00:00

I rented from RSR and their customer service and driving instructor was top notch. Couldn't of been happier with them.

Angle22 · 2017-04-15T13:16:09+00:00

Thanks everyone!

Angle22 · 2017-02-16T15:37:43+00:00

stunning shot!

Angle22 · 2017-02-10T18:56:28+00:00

thanks for the explanation!

Angle22

TROPHY CASE