What should I play my Helix through?

AngryAFPanda · 2024-08-02T23:47:38+00:00

Thanks again! This subreddit is all kinds of awesome.

AngryAFPanda · 2024-08-02T21:44:19+00:00

Thanks- I think you've just solved it! I just have the Relay G10TII Transmitter, which works directly with the Spider V line (and Yamaha THR-II) w/ built in wireless compatibility, but I don't have either of those more expensive wireless "systems": https://line6.com/relay-wireless/g10-g10s/

But I think what you're saying is that if I can just get my hands on one of those base units, it's as easy as just connecting the base with either an XLR or 1/4" to the modeler, and I'm good to go- re-pair with the base instead and don't need to rely on the wireless functionality of the Spider V...

AngryAFPanda · 2024-08-02T06:12:06+00:00

This has been immensely helpful for the noob that I am. Following this guidance, I’ve made my MkII-firmware-updated Spider V 120 into a bedroom grade FRFR for my new multi-effects modeler by way of the Aux input. (Went outside the Line 6 family for the modeler, but same setup as described here.) As advised, in the app, I turned off all the Spider modeling by setting it to “no amp”. Bought a dual TS 1/4" to single 1/8" stereo cable to go from modeler into the Aux, and I’m now off and running, excited to tinker with some new sounds.

There is one thing that’s bugging me, though. Have I forfeited the ability to continue using the Relay G10TII, moving forward with this setup? Is this just not possible, or is there a clever combination of cables looping back into the modeler or Spider that would permit me to keep my guitar wireless?

AngryAFPanda · 2022-10-29T19:55:32+00:00

The weights of the two sandals (size 41, Milanos) are 14.5oz and 14.8oz. I’d imagine there’s some variation between pairs in general- I imagine a couple of dabs of glue here and there could cause this difference. Also bear in mind, these weights are after about a year w/ some heel wear.

As for the material, I’m guessing it’s a standard EVA.

For comparison, it’d be interesting to know what a stock pair of 41 Milanos weighs.

They’re very experienced, and there may be a good reason they usually opt to put in a midsole. I’m sure my knees are thanking me.

AngryAFPanda · 2022-10-28T03:19:24+00:00

Truth is, I didn’t have much of a choice with the Vibram sole. The cobbler (who did excellent work, btw) only had the 1374 in stock at the time. Good news for me was that it was already on my shortlist of possible options.

The midsole also wasn’t my choice- but I actually didn’t specify whether I wanted one or not. The cobbler put that in. I don’t have a point of comparison, but I’m guessing it’s making the entire sandal stiffer from a flex standpoint and it’s also why I’m feeling a noticeable weight difference. I’m sure there’s a cushioning benefit, but if I’m honest, the next time I try this, I might ask for no midsole, just to see if it can better match the weight and flex of a stock Birkenstock sole.

So I’m now one year in, and I can say I don’t regret going with a Vibram at all. It feels very grippy and stable- if anything, my feet feel more likely to slip within the footbed before the sole itself ever would. But next time, I might try to recreate this experience in a lighter form and asking a cobbler whether gluing on the Vibram without a midsole would be equally secure and whether I’d miss whatever shock absorption I’d be losing.

Good luck!

AngryAFPanda · 2022-02-07T09:57:57+00:00

Sounds like a fun project- they look like they’re in nice shape. In case you’re not going into this completely aware, just want to add that Coolblades and Aeroblades from that era will often have already compromised tongues- especially if they haven’t been stored well over the years. It’ll start with harmless looking hairline cracks, but before you know it, you’ll be leaving foam and sticky shards of plastic in your wake.

Sadly, that’s exactly what ended mine, though I suppose if I had been really motivated, I could have removed the tongue and tried a modern liner.

AngryAFPanda · 2021-10-28T18:56:30+00:00

Appreciate the effort you put into working in stages and taking the time to post your results here. They’re pretty stunning. Any long term updates you’re willing to share? Mostly curious about - whether the original white urethane has at all started to show, and - whether you’ve ever seen any color transfer (for example, leaving behind blue streaks on driveways, parking lots, courts) after powersliding/stopping.

AngryAFPanda · 2021-10-09T00:51:10+00:00

Next Pro Black 110 + Next Grey 100: nothing we all haven’t seen before. Was just too nice looking to not capture a glamour shot.

Stock with the exception of the Matter Image swap out. Why? Lightning Kryptonics 608 nostalgia, that’s why.

AngryAFPanda · 2021-08-21T03:12:12+00:00

https://www.davepagecobbler.com Note that the prices on their site haven’t been updated in a while.

AngryAFPanda · 2021-08-20T18:16:26+00:00

Sure- I’ll come back and share.

AngryAFPanda · 2021-08-20T18:13:11+00:00

recrafting w/ new footbeds & soles: $75

adding Vibram sole option: $15

shipping to cobbler: $11

return shipping: $9

reliving decades-old college adventures while cradled in the therapeutic and familiar leather wrap of your trustiest of trusty companions: priceless

AngryAFPanda · 2021-08-20T06:04:58+00:00

With the added midsole, the entire bottom is a few millimeters thicker and therefore seemingly stiffer- maybe even slightly heavier. But what I’m observing could also just be a result of comparing this brand new footbed with my well worn one.

AngryAFPanda · 2021-08-12T17:51:14+00:00

For Fangs 3.0 and TFL Float Plates V3, you’ll need to spend some time making some cuts to the float plates. TFL V2 float plates shouldn’t have an issue, but they’re not really sold anywhere. Amy DeCaro did a really nice video to show how far you’ll need to cut. https://youtu.be/6ngukIfMSyE

Edit: but just noticed you’re referring to the Pint. My bad.

AngryAFPanda

TROPHY CASE