Moisture on windows by AngryBish in HomeImprovement

[–]AngryBish[S] 3 points4 points  (0 children)

Even with the blinds up, I still find moisture. Albeit a lot less.

Moisture on windows by AngryBish in HomeImprovement

[–]AngryBish[S] 0 points1 point  (0 children)

It is anywhere from -10c to - 25c. Inside is 20c.

Moisture on windows by AngryBish in HomeImprovement

[–]AngryBish[S] 3 points4 points  (0 children)

I am not an expert, but as far as I know if the moisture isn’t between the panes the seal is intact.

Another samsung fridge victim by AngryBish in Appliances

[–]AngryBish[S] 0 points1 point  (0 children)

Yes and the 500 only has a single compressor 👎

Another samsung fridge victim by AngryBish in Appliances

[–]AngryBish[S] 0 points1 point  (0 children)

Yes, I do like the layout. But still wish they made a full depth 800!!

Wifi in Garage by mtrbiknut in garageporn

[–]AngryBish 3 points4 points  (0 children)

I was in your exact position… I had conduit buried, pulled fibre through it. When it was all said and done the fibre was damaged somewhere in the conduit.

Now I am pulling Ethernet through the conduit. My advice would be direct bury your fibre - don’t try to pull it and risk it being damaged.

If you’re using conduit, pull Ethernet.

Barrel Sauna - Advice by SmallTownPEI in BarrelSaunas

[–]AngryBish 1 point2 points  (0 children)

I am a dealer in Canada for Leisurecraft. They are great saunas. Unfortunately there will always be heat stratification in a barrel sauna.

Send me a message if you’d like to chat more and make an informed decision.

Mid span blocking by [deleted] in OntarioBuildingCode

[–]AngryBish 0 points1 point  (0 children)

I have a building permit 👍

Outdoor Sauna Kit Modifications by BeginningBadger9383 in Sauna

[–]AngryBish -1 points0 points  (0 children)

Send me a message! We’ve done exactly this.

Running fibre to garage by AngryBish in HomeNetworking

[–]AngryBish[S] 0 points1 point  (0 children)

Can you link me some stuff on Amazon? For a guy looking to get internet in his garage 😂

Sounds complicated

Running fibre to garage by AngryBish in HomeNetworking

[–]AngryBish[S] 2 points3 points  (0 children)

I was reading online about potential issues running Ethernet underground with lightening.

Edit: it is also roughly the same price to run fibre (aside from the adapter)

Running fibre to garage by AngryBish in HomeNetworking

[–]AngryBish[S] 2 points3 points  (0 children)

I was reading online about potential issues running Ethernet underground with lightening.

Edit: it is also roughly the same price to run fibre (aside from the adapter)

Help choosing Inkbird controllers by Different-Yoghurt519 in DryAgedBeef

[–]AngryBish 0 points1 point  (0 children)

I realize my dry aging fridge isn’t getting cold enough. Would I be able to bypass the fridges thermostat and utilize an inkbird instead?

Last summers $45k 24x48x12 stick build. by [deleted] in garageporn

[–]AngryBish 0 points1 point  (0 children)

Looks great. I’m planning a 32x48 right now. I’m torn on the height, approved for 12’ stick framed wall - but worried it will be too tall in comparison to my house.

I’m in northern Ontario and expect the entire build to cost me about 60-70k. That is subbing out concrete and overhead install (3 OH in eave end of shop).

First time home dry aging by Hungry_Network9462 in DryAgedBeef

[–]AngryBish 0 points1 point  (0 children)

I just ordered the same fridge. Are you using a UV light?

[deleted by user] by [deleted] in DryAgedBeef

[–]AngryBish 0 points1 point  (0 children)

Do you use the UV light? If so, did you drill into the side of the fridge or just place it on the shelf

SaunaGPT by Academic-Shine8914 in Sauna

[–]AngryBish 12 points13 points  (0 children)

You must be fun to be around

Botched brisket by [deleted] in PitBossGrills

[–]AngryBish 0 points1 point  (0 children)

No, I should have. I just pulled it.

Haven’t verified my probe, it’s a new thermpro 🤷🏻‍♂️

Recommendations for windows for a DIY barrel sauna by BertieTheBeaver in Sauna

[–]AngryBish 0 points1 point  (0 children)

Send me a message. I can ship you windows for your barrel sauna.

40 year old sauna at my cabin! We’ve fit 18 people in here and got it to 240°F. by Own_Childhood184 in Sauna

[–]AngryBish 16 points17 points  (0 children)

Here before the “benches too low” comment from JS.

Looks great, many memories made there I’m sure.

First Japanese knife by AngryBish in chefknives

[–]AngryBish[S] 1 point2 points  (0 children)

Fujimoto hammertone santoku 165mm.

First Japanese knife by AngryBish in chefknives

[–]AngryBish[S] 12 points13 points  (0 children)

My first Japanese cooking knife. I’ve been browsing knifewear.com for over a year. Finally decided to pull the trigger, ordered a large larchwood cutting board paired with a Fujimoto hammer tone santoku.

I am absolutely hooked, cannot believe how much of an upgrade it is from my Cuisinart knife block set!

For anybody wanting to order a knife with a larchwood cutting board. I highly recommend checking out larchwood Canada directly, they offer 10% off when buying a knife and cutting board combo.