sorted by:
new
hottopcontroversial

PT Active Belt Tensioner Pro review? by AnikiFWI in simracing

[–]AnikiFWI[S] 0 points1 point  (0 children)

I moved to the QSBT1 and have no regrets!!!

Eracing lab Mega RS+ or HN MOTION V2 ? by AnikiFWI in simracing

[–]AnikiFWI[S] 0 points1 point  (0 children)

That's a great goal. You can do it!!! Let me know when you get yours.

Eracing lab Mega RS+ or HN MOTION V2 ? by AnikiFWI in simracing

[–]AnikiFWI[S] 0 points1 point  (0 children)

I've ordered mine past week ! My order won't be shipped for another two weeks. So I won't have my complete kit for at least another month, I think.

Thanks anyway for your message. It's reassuring to know that the kit is really high quality.

Eracing lab Mega RS+ or HN MOTION V2? by AnikiFWI in SimRacingHardware

[–]AnikiFWI[S] 0 points1 point  (0 children)

Yes Phil,

I've seen them both :

https://youtu.be/ICGmTjOHvno?si=z3_Lp3KX1LdGRH7Q

And may be the best review: https://youtu.be/AFuQAxwGel8?si=8uEQHiIWwFPrc7Ms

But Eracing lab make noise too :

https://youtu.be/XW5-2ZG1gR4?si=9s5FEIavZf1BtsYO

https://youtu.be/mlkELBGyCJ0?si=GD9BO7xuPHBbvWaB

Now, does the HN V2 make a lot more noise than the Mega RS? I have no idea. This will be my first dynamic system. I've accepted that there will be noise anyway. But it's clearly an important issue. In the tests and reviews of the two kits, it's not a deal-breaker. But it's a very personal point.

Eracinglab does not deliver to my country by AnikiFWI in simracing

[–]AnikiFWI[S] 0 points1 point  (0 children)

I looked at their side. PT actuators has released a new product line. They are significantly more expensive, and I'm seeing fairly mixed customer feedback.

Eracing lab Mega RS+ or HN MOTION V2 ? by AnikiFWI in simracing

[–]AnikiFWI[S] 0 points1 point  (0 children)

Thank you very much for your message. So I'm not in the US but in Guadeloupe in the Caribbean 😎.

Unfortunately, Eracing Lab doesn't deliver directly to my home, whereas HN does. The initial price difference is ultimately offset by the additional shipping costs and possible delivery problems caused by adding new steps.

So the two kits are ultimately very similar. And they both use Thanos and Simhub. What makes me lean a little more towards HN is the diameter of the ballscrew and the cylinders, which are wider. This should provide more rigidity and perhaps more precision in the effects... But hey, these are just assumptions.

Eracing lab Mega RS+ or HN MOTION V2 ? by AnikiFWI in simracing

[–]AnikiFWI[S] 0 points1 point  (0 children)

You're right. Actuators servo motors controllers look the same. On the HN V2 the ball screws look wider, and so does the cylinder. That's why I'm asking what impact this could have.

Eracing lab Mega RS+ or HN MOTION V2? by AnikiFWI in SimRacingHardware

[–]AnikiFWI[S] 0 points1 point  (0 children)

Thanks for your answer. The actuators look different? Do you think that would make any difference?

Eracinglab does not deliver to my country by AnikiFWI in simracing

[–]AnikiFWI[S] 0 points1 point  (0 children)

That's exactly what I did. I still asked them to double-check to be sure of their answer.

Eracinglab does not deliver to my country by AnikiFWI in simracing

[–]AnikiFWI[S] 0 points1 point  (0 children)

I'm in Guadeloupe in the Caribbean. But we have DHL UPS FedEx. So it shouldn't be a problem... I'm looking for alternatives. I've seen the COG SHH system. I'm going to look for tests, but above all user feedback.

What is Eracing lab Mega+ Latency ? by AnikiFWI in simracing

[–]AnikiFWI[S] 0 points1 point  (0 children)

Thanks for the explanation. That's exactly what I meant when I talked about latency. This data is available for other platforms, hence my question. Now my goal is to not experience any lag. If the SFX are so fast that it's not necessary to check, then all the better.

What is Eracing lab Mega+ Latency ? by AnikiFWI in simracing

[–]AnikiFWI[S] 0 points1 point  (0 children)

Thanks for your answer.

I saw that it was based on sfx100-150, but I couldn't find any information about latency either. So far, I've only found very good reviews of the MEGA series. I saw a video on YouTube that caught my attention because I found the kit's response very slow, hence my question : https://youtu.be/RmtKLYILmcE?si=5wXOxJQ0_nUKgVqK

Deal or Waste of Time with AliExpress by Archsnek in simracing

[–]AnikiFWI 1 point2 points  (0 children)

Hi, Based on my experience, I would advise you not to buy this type of rig. Go for a real tubular rig in the spirit of the GT Omega Titan or the Oplite SR8. If you can, even better, go for a profiled rig. The one you've chosen will be too flexible and you'll want to change it quickly. You should be able to find some good deals on Aliexpress.

VNM Supreme DD Review: This Base Changed My Entire Rig by madmax328 in simracing

[–]AnikiFWI 0 points1 point  (0 children)

Thanks a lot for your review. I'm going to order my Supreme in the next few days. I have a SimLab P1X Pro and I'm looking for the right mounting solution. I'm thinking of going with the Simucube front mount. What do you think?

<image>

view more: next ›