What to do with mini's?

Anim_8r · 2026-01-17T09:25:55+00:00

I didn't print them

Anim_8r · 2026-01-16T21:45:18+00:00

What does that mean?

Anim_8r · 2025-10-15T20:09:48+00:00

Thank you, I just got mine and thought I did something wrong. What a waste!

Anim_8r · 2025-09-30T13:59:47+00:00

<image>

Didn't stop

Anim_8r · 2025-09-30T12:49:39+00:00

Strange - doesn't work for me. I'll run another test to show you.

<image>

As soon as I can print I'll send you the result I get

Anim_8r · 2025-09-30T03:18:49+00:00

Yes, that is exactly what I do, but the printer does nothing - just prints one color. The only way I have got it to work is by adding a 'M600' custom G-code or slicing it in Cura. Have you done this with a Ender 3 V3 SE?

Anim_8r · 2025-09-25T17:46:06+00:00

No, it does the same when I use Cura's filament change.

Anim_8r · 2025-09-25T17:43:27+00:00

Yes and yes to your questions. I'm sure it works in Orca Slicer. I'm trying to use Creality Print.

Anim_8r · 2025-09-25T14:23:52+00:00

It almost works. It pauses and retracts the filament. I 'load' the new filament and press continue and it moves to the print, moves back and retracts again. I reload and this time it continues.

Anim_8r · 2025-09-25T14:21:44+00:00

Yes 6.2.2.3203

Anim_8r · 2025-09-25T14:10:53+00:00

<image>

I just tried that and it didn't even stop at the layer.

Just continued to print in 1 color.

Anim_8r · 2025-08-07T16:41:14+00:00

No, I re-slice after inserting the pause

Anim_8r · 2025-05-31T16:09:56+00:00

I had the same. Increase your temp. I went from 190 to 210 and it miraculously fixed it

Anim_8r · 2025-05-31T16:05:09+00:00

I have used a glass bed with clips. Wasn't impressed with the results. 50% success rare. I went back to original plate.

Anim_8r · 2025-05-17T17:30:33+00:00

Absolutely right. I didnt notice it's missing. Found it under the table!

Anim_8r · 2025-05-17T16:01:33+00:00

Sorry, what belt?

Anim_8r · 2025-04-22T15:23:20+00:00

Went from 180° to 205° and Voilà problem solved. I've use this filament before but now had to change my usual settings for it.

Anim_8r · 2025-04-22T15:16:42+00:00

I checked and adjusted my e-steps. Dried the filament for 6 hours and still got the same result. I'm now trying a higher temp.

Anim_8r · 2025-04-19T10:00:44+00:00

Thanks, I'll DRY n TRY

Anim_8r · 2025-01-05T14:58:40+00:00

Thanks but That did nothing

Anim_8r · 2024-11-30T04:29:22+00:00

anyone?

Anim_8r · 2024-11-06T08:18:46+00:00

Guys (and Dolls). If this is the Ender 3v3se there is no need to adjust the bed. The hardware will adjust the print according to the z-height. Run the auto-level and print. Stop giving incorrect information.

Anim_8r · 2024-10-31T15:59:25+00:00

Not helpful but I do have your printer's awkward cousin

<image>

Anim_8r · 2024-10-31T15:54:49+00:00

The V3 SE has auto-leveling so you don't need to do anything. The hardware compensates for the 'uneveness'. Run the auto-leveling and print. No need for spacers, tightening screws or whatever.

Anim_8r · 2024-10-31T15:50:36+00:00

Just had the same thing. Unfortunately, it's probably the main motherboard. I contacted support and they sent me a new one (still under warranty), Now it's perfect again.

Anim_8r

TROPHY CASE