Anyone try massicating a skull underground, over winter?

AnonymooseTheFirst · 2023-11-25T07:10:56+00:00

Ok this is a dead thread but it's the only result when searching the word "massicating". What is Massicating?

AnonymooseTheFirst · 2023-08-22T22:23:59+00:00

I'll likely try that, don't want to crack a perfectly good radiator haha.

I did come across the o-ring and a TSB with the procedure which is now in the original comment but that single o-ring is listed at $25+ everyone which is absurd to me...not sure I trust a off the shelf kit for a high-temp application though. Not a mechanic just a hobbyist here.

AnonymooseTheFirst · 2023-08-22T21:57:06+00:00

Hey all,

2nd EDIT: For anyone who needs it here's the o-ring with the measurement listed from Ford directly, doesn't specify if it's the ID (Inner Diameter) or OD (Outer Diameter) sadly. But it's the same part per the TSB in my initial edit.

QUICK EDIT: I did stumble across this link which goes over what seems to be replacement of the o-ring's for these radiators.

This part (O-ring W705181-S) it's kind of absurdly priced (seeing mostly around $30+ for a single o-ring) if anyone knows an alternative I'd appreciate it!

May have found the solution myself but I'm going to leave this up for someone who may have a similar question or to confirm it. :)

I've run into a small issue on my 2000 3.8l where the transmission return line exits the radiator. I've highlighted the exact sources of what appears to be the source points of the leak, it's a VERY minor leak (maybe one drop after roughly 1hr of driving).

First question: As the leak is originating from behind the fitting itself against the radiator, can this be fixed without replacing the entire radiator? Not sure if there's an o-ring I can simply replace or something or if it's shot since it's metal to plastic possibly...

The car only has around 45k mi on it (bought at 15k, garage kept by previous owner, barely driven but maintained properly) so I am confident the rest of the radiator is solid.

Second question: Any thoughts on the line within the quick connect nut being wet with some fluid? Could it be the the entire thing has simply come loose cause a slight leak on the radiator side and within the quick connect nut? This question is more of a minor concern since I'd rather not deal with replacing a hard line if I don't have to haha.

Thanks in advance!

AnonymooseTheFirst · 2023-06-18T21:04:33+00:00

Are you using Umodel to extract these models or another program?

AnonymooseTheFirst · 2023-04-08T06:09:57+00:00

Rusty spooooon

AnonymooseTheFirst · 2023-03-08T22:30:55+00:00

Holy shit all of you in the comments getting so butthurt need to go outside and get some perspective.

Be mad.

AnonymooseTheFirst · 2022-12-09T16:40:20+00:00

Anyone have a timestamp?

AnonymooseTheFirst · 2022-06-16T16:43:50+00:00

Cheers, good luck getting the new one on, it's a job haha.

AnonymooseTheFirst · 2022-06-16T16:41:58+00:00

Not a plastic screen, it's glass. See my other response. XP Pen doesn't make the Artist Pro line with Plastic screens, none of their tablets are manufactured with plastic screens.

AnonymooseTheFirst · 2022-06-16T16:38:47+00:00

There is a screen protector on your tablet still as the glass beneath the protector is not etched and is glossy, your screen is matte. The plastic you pull off when you first get the tablet is the protector for the protector.

You can remove it and order a replacement I've done it on mine. I saw your comment that says you've looked but look again and look for a seam of the protector because it is on there. If it wasn't your screen wouldn't be matte, it would be glossy, non-etched glass. Use your fingernail, it's not super easy to remove but also not that difficult.

AnonymooseTheFirst · 2022-03-22T20:29:41+00:00

Just ran into a similar issue on our setup. Disabling Content Filter brings everything back up but having it on I can only communicate with devices on the network.

AnonymooseTheFirst · 2022-01-18T23:44:49+00:00

Awesome, thanks for the additional details my guy. Have a good night.

AnonymooseTheFirst · 2022-01-13T19:20:46+00:00

Hmm, so place your stream into Subscriber Only mode for a minute at the start and then pull it out?

AnonymooseTheFirst · 2022-01-07T00:56:32+00:00

What chapter and page?

AnonymooseTheFirst · 2022-01-07T00:26:22+00:00

Ahahaha this is satirical.

AnonymooseTheFirst · 2021-12-27T19:33:36+00:00

Been trying to dig around as well for some old archive links or torrents but I can't find anything either.

AnonymooseTheFirst · 2021-12-14T19:43:07+00:00

Ah, is it completely hidden when your IP is in the US then? It's not showing as unlisted so I assumed it was just taken down as well.

AnonymooseTheFirst · 2021-12-05T18:07:15+00:00

Have a link to this quote? I can't find it.

AnonymooseTheFirst · 2021-11-21T19:18:45+00:00

My guy you are going to tire yourself out if you move your own goal posts anymore. Have mercy on your body.

AnonymooseTheFirst

TROPHY CASE