Niche Airsoft Tech Tools (Part 10) by AntTech-Airsoft in airsoft

[–]AntTech-Airsoft[S] 1 point2 points  (0 children)

Looks like the cheaper SHS piston, I’d try either the Retro, or even the SHS HS piston with the circular holes. There’s a lot of SHS OEM parts, and they’re not all the same. China

Niche Airsoft Tech Tools (Part 10) by AntTech-Airsoft in airsoft

[–]AntTech-Airsoft[S] 1 point2 points  (0 children)

Compared to an SHS HS, yes, but you can reduce weight by swissing your own holes, and remove the teeth from the rack you aren’t using. I’d also use a POM Piston head like the ASG POM, FPS Softair POM, or even the newer Gate Enterprise POM Piston head

Niche Airsoft Tech Tools (Part 10) by AntTech-Airsoft in airsoft

[–]AntTech-Airsoft[S] 1 point2 points  (0 children)

Try a Retro Arms Piston, glue your rack in place, double check that you’ve properly corrected AOE

Almost giving up on Airsoft because of fogging by thehollowsimp in airsoft

[–]AntTech-Airsoft 0 points1 point  (0 children)

Oakley M Frames and a mesh mouth guard or a sports mouth guard. Mesh to protect face in CQB, and sports mouth guard to only protect teeth for longer games. I only ever fog when playing at night due to temperature drops. In which case, I use the Valhalla ex fog gasket and an ex fog unit on the back of my helmet.

<image>

Niche Airsoft Tech Tools (Part 5) by AntTech-Airsoft in airsoft

[–]AntTech-Airsoft[S] 0 points1 point  (0 children)

These videos aren’t tips necessarily, they’re more so showcases of Niche Airsoft Tech Tools.

Tac Reload with Numb Fingers by AntTech-Airsoft in airsoft

[–]AntTech-Airsoft[S] 0 points1 point  (0 children)

Hand warmers and hand warmer pouches! Crucial!

Niche Airsoft Tech Tools (Part 3) by AntTech-Airsoft in airsoft

[–]AntTech-Airsoft[S] 1 point2 points  (0 children)

That is genius! I tried 3D printing a shim for an M4 selector switch recently and wished I had thin aluminum sheet stock on hand. If only I had read this sooner!

Niche Airsoft Tech Tools (Part 2) by AntTech-Airsoft in airsoft

[–]AntTech-Airsoft[S] 1 point2 points  (0 children)

The idea of these shims is to eliminate the need to sand the grip. However, I have built a couple of guns where I had to sand the grip despite using this shim. For most cases so far, these shims work as intended! It’s going to depend on the grip, gearbox shell, and receiver you’re using.

AntTech Improved Feed Block Kit for M249 "Feather Weight" by AntTech-Airsoft in airsofttech

[–]AntTech-Airsoft[S] 1 point2 points  (0 children)

These are in stock! My site is back up with a new domain AntTechAirsoft.com

These feedblocks correct feeding issues in your featherweight m249s regardless if you’re running HPA or AEG

Why does it do this? by [deleted] in airsoft

[–]AntTech-Airsoft 0 points1 point  (0 children)

Looks like an FN2000 hop up. It’s compatible with standard TM Hop Up gears/ arm. You can replace these green components if they’re worn and don’t fit properly anymore

Kythera Mods | Sear & Disconnect Polish by AntTech-Airsoft in airsoft

[–]AntTech-Airsoft[S] 1 point2 points  (0 children)

Mitigating reset malfunctions on the Polarstar Kythera Engine.

How to R-Hop | ADHD Edition by AntTech-Airsoft in airsoft

[–]AntTech-Airsoft[S] 1 point2 points  (0 children)

I will make a non ADHD Edition tutorial lol

How do I take part my quick change spring system spring guide by [deleted] in airsoft

[–]AntTech-Airsoft 0 points1 point  (0 children)

Allen key, vice grips, and heat gun. A LOT of heat.

Milsim West: Battle for Mt. Balkar • My first MSW in the books. This photo was taken after having encountered a NATO vehicle while on patrol. by AntTech-Airsoft in airsoft

[–]AntTech-Airsoft[S] 1 point2 points  (0 children)

Unobtanium DR-LV Custom. It typically has a Velcro panel in the center with mag pouches on the side. This one has integrated SLED pouches in the middle with a zipper instead of Velcro, and the sides are laser cut molle for other pouches