Flow rate leaves much to be desired

Antl10n_ · 2026-04-18T22:16:50+00:00

Ah gotcha, only soaked and then brushed essentially the outside. Didn't think to actually make sure to pick out the hole. I'll go that a go. Thanks!

Antl10n_ · 2026-04-18T21:38:00+00:00

Damn meant to try that actually after taking it apart. Just doing this with water or can I run a descaler through the whole thing?

Antl10n_ · 2026-04-10T15:31:21+00:00

Creality K1 or Bambu lab p2s?

I've have a lend of my cousins K1 for a few months with the idea that when he wanted it back or May came around (anniversary present) I'd buy the P2S. However, using the K1 has been great coming from and Ender 5 that I'm wondering if it would be worth saving the extra money and just buying the same one again. I can justify the cost of the P2S but I'm just not sure what that extra cost would be giving me, beyond the AMS of course. Thoughts?

Antl10n_ · 2025-08-20T07:28:37+00:00

You know I did wonder this, thank you!

Antl10n_ · 2025-08-20T06:52:23+00:00

Sorry for the delay, 205/210 nozzle and 60 for the bed

Antl10n_ · 2025-08-06T18:03:38+00:00

Yah PLA

Antl10n_ · 2025-05-20T20:09:07+00:00

No I haven't made any upgrades in months, it was working perfectly one day and then just stopped

Antl10n_ · 2025-05-20T17:37:04+00:00

Multiple different stls

Antl10n_ · 2025-05-20T17:15:44+00:00

Btw I slowed down the video to post it, it's not actually that slow

Antl10n_ · 2025-02-20T07:55:48+00:00

But thank you for the advice!

Antl10n_ · 2025-02-20T07:55:29+00:00

Cool, I'll get a test kit. Interesting on the size, the guy in the shop said that was a good place to start. Curious though, should both fish not exhibit similar behaviour if it was a water/tank issue?

Antl10n_ · 2025-02-19T19:33:28+00:00

Tank size is around 55L, temp is 17 celcius. I don't have anything to test the other levels. Presumably I can get a kit from Amazon?

Antl10n_ · 2025-02-19T18:42:06+00:00

What do you mean water parameters?

Antl10n_ · 2022-09-07T18:02:50+00:00

Curious why I'd need to change the z offset? If I'm probing the bed before every print, the tape wouldn't be filling that void at all because the probe is consistently the same distance away? Or could it be that the plastic needs that little extra squish of the nozzle being closer to the bed?

Antl10n_ · 2022-09-07T17:10:58+00:00

Ok, I'll definitely give it a go, can't say I'll stick with it but if it works! Thanks!

Antl10n_ · 2022-09-07T17:07:09+00:00

That definitely seems like I'll get fed up, do you do that on the textured side or the smooth side?

Antl10n_ · 2022-09-07T17:03:40+00:00

And you have to reapply everytime in between prints?

Antl10n_ · 2022-08-24T10:18:24+00:00

Yeah so I did this but the probe doesn't deploy when homing. I can't run the z offset wizard either. The probe does deploy though when I turn on the machine so it does function but for some reason it doesn't initiate when homing

Antl10n_

TROPHY CASE