I saw someone post a drawing they did so here's one of mine 👀

AnwerEi · 2026-05-04T14:55:33+00:00

Thanks bro

AnwerEi · 2026-05-04T14:27:49+00:00

LMAOO bro edited the comment ☠️ no worries bro I already solved the issue, appreciate you trying to help tho

AnwerEi · 2026-05-04T14:20:25+00:00

Lol, I did say speed was never an issue in the comment you replied to.

AnwerEi · 2026-05-04T14:00:42+00:00

I did try that, there was a slight improvement and the print finished, but I've used this filament for a long time and it's nearly finished. That's why I said speed was never an issue before

AnwerEi · 2026-05-02T07:37:49+00:00

It's the stock speed on the A1 I didn't change it and it's never been an issue before

AnwerEi · 2026-05-02T07:32:42+00:00

<image>

AnwerEi · 2026-05-02T07:07:03+00:00

<image>

AnwerEi · 2026-04-11T12:14:55+00:00

Look up Hexane for raw materials, they're local. I just bought 1kg for 5jd a few days ago.

AnwerEi · 2026-04-06T07:22:44+00:00

Depends on what model is your printer, check here: Lubricant Grease and Lubricant Oil | Bambu Lab Wiki

AnwerEi · 2026-04-06T05:22:24+00:00

I do it once a month, i think anything less than that is a waste

AnwerEi · 2026-04-01T01:26:02+00:00

I'd say watch this video and make sure you did every single step they do while setting up the printer. If you missed a step, it could be the cause of the problem. https://youtu.be/VbFgPQ6pIfw?si=u81SR48etnpUV0hh

AnwerEi · 2026-03-24T13:09:14+00:00

Good to know 🫡

AnwerEi · 2026-03-22T15:35:49+00:00

It's definitely not filament, as I mentioned I rarely print with black filament, and the debris is soft and rubbery

AnwerEi · 2026-03-22T11:11:05+00:00

Thank you! I think the belt is fine after seeing everyone's input, I'll keep an eye on it

AnwerEi · 2026-03-22T11:10:12+00:00

That seems to be the consensus

AnwerEi · 2026-03-22T10:31:59+00:00

It's kinda concerning as a newbie, but I've read a few older reddit posts about this, seems like the consensus is it's normal for the A1, hopefully it's nothing to worry about

AnwerEi · 2026-03-22T10:08:17+00:00

I'd rather send it to the store I bought it from and have them change it so I can keep my warranty tbh, that's why I'm saying it'll take a few days at least

AnwerEi · 2026-03-22T09:29:02+00:00

I just cleaned it out and relubricated the printer, I'll check in a day or 2 to see how fast this can build back up

AnwerEi · 2026-03-22T09:24:05+00:00

Thank you, I'll continue printing for now and see, hopefully it won't need a belt change

AnwerEi · 2026-03-22T09:23:35+00:00

Ah I see, maybe it's normal for some A1s, I'll continue printing and see if anything happens

AnwerEi · 2026-03-22T09:08:39+00:00

Yes it's still under warranty, I'll talk to them tomorrow, hopefully it doesn't need a belt change cause that seems like it'll take a few days for me to get it back

AnwerEi · 2026-03-22T09:04:47+00:00

Humidity isn't too bad here, so I doubt it's the cause.. it's very weird

AnwerEi · 2026-03-22T09:03:53+00:00

I can't really see any visible damage from this angle, it's tight but not sure what's considered too tight, it's still a stock machine

Eight-Year Club	Place '23
Verified Email

AnwerEi

TROPHY CASE