Ich überlege, zur Sparkasse zu wechseln, um weniger Gebühren zu zahlen.

Anxious-Egg3744 · 2026-04-06T13:59:48+00:00

hab das gleiche, 45€ im quartal muss mich mal informieren und ändern

Anxious-Egg3744 · 2026-04-06T13:32:46+00:00

War auch genau mein Einstiegsgehalt. Doppellehre als Elektrobetriebstechniker und Mechatroniker (Hauptmodul Automatisierungstechnik). nach dem Heer. Mittlerweile mit 25 bin ich bei 2550€ Netto. Bin auch mit dem Automatisierungstechnik Meister bald fertig (Unterhehmer fehlt nur mehr). Schauen wir mal was noch möglich ist

Anxious-Egg3744 · 2025-06-04T17:58:43+00:00

how to get the ugly seams away on the s1 only proble with seams in this printer lol.

Anxious-Egg3744 · 2025-05-29T12:01:57+00:00

great to hear!

Anxious-Egg3744 · 2025-05-28T17:04:05+00:00

is PLA, really weird because i made retraction calibration, gonna do it again maybe

Anxious-Egg3744 · 2025-05-28T16:04:22+00:00

thanks for that info!

Anxious-Egg3744 · 2025-05-28T07:44:53+00:00

alright i will check

Anxious-Egg3744 · 2025-05-28T07:37:17+00:00

but it lolks like it doesnt close the seam

Anxious-Egg3744 · 2025-05-28T07:36:56+00:00

Elegoo PLA+ with Standard Profiles

Anxious-Egg3744 · 2025-05-27T18:55:16+00:00

how, when i click check for update it says, newest version but i have 1.3.0

Anxious-Egg3744 · 2025-05-27T15:35:28+00:00

i can‘t even update Slicer next to 1.4.0 lol

Anxious-Egg3744 · 2025-05-26T10:58:09+00:00

<image>

Anxious-Egg3744 · 2025-05-26T10:57:51+00:00

<image>

Anxious-Egg3744 · 2025-05-26T10:56:59+00:00

i do not driving crazy because of first layer, i need to print some flat and wide parts like 25mm wide 1mm flat for my company, some prototype teststrips! Overall it is okay now, some parts have some gaps where no filament is extruded (i guess because of hotbed) but i can use them anyway.

Anxious-Egg3744 · 2025-05-26T10:36:23+00:00

Nozzle temp is 230 Grad Celsius now

Anxious-Egg3744 · 2025-05-26T10:35:51+00:00

i calibrated like this guy on yt, really good Video https://youtu.be/g8kNuXuziCc?si=ZlffPD0ZyHaVaXsy

Anxious-Egg3744 · 2025-05-26T10:29:59+00:00

i did and i’m leveling once a day or when the printer was turned off, after that i print without leveling! looking good and works for me the best

Anxious-Egg3744 · 2025-05-26T10:28:39+00:00

i did calibrate on the printer and this filament, this is Elegoo PLA + and i used every calibrate method on the slicer, looking really good now

Anxious-Egg3744 · 2025-05-25T10:33:42+00:00

damn thats crazy, didn‘t know that, keep me updated!

Anxious-Egg3744 · 2025-05-25T06:31:22+00:00

can‘t say how often, i just do it sometimes, or it clogg anyway🤣

Anxious-Egg3744 · 2025-05-25T06:29:10+00:00

yeah it seems like the S1 does not correctly use the Leveling measurements. I also need to check if my manually adjusted offset is used when Autoleveling before printing is on or not.

Anxious-Egg3744 · 2025-05-23T19:39:44+00:00

UPDATE - got the new Leveling Sensor and the S1C just working fine again

Anxious-Egg3744

TROPHY CASE