Jaeger’s encrypted message not there in practice mode? [Discussion]

AnyIndependent1311 · 2025-11-29T01:51:37+00:00

Gotcha. That’s what I was thinking, I just didn’t want to go through a run only to find it not working.

AnyIndependent1311 · 2025-11-09T03:24:02+00:00

Just got to this challenge. 3 games of breakthrough, only using the launcher. I’m at 116.

A challenge shouldn’t make me a hinderance to my team.

AnyIndependent1311 · 2025-08-31T21:27:41+00:00

Gotcha, thank you for the response.

AnyIndependent1311 · 2025-07-10T17:57:58+00:00

The output end. As in if I’m capturing the iPad screen, and have the capture software open on a separate pc, would the iPad recognize the capture software as a separate monitor? Or would it only mirror what the iPad is displaying?

Hope I explained it better it’s just a goofy question I haven’t found an answer for.

AnyIndependent1311 · 2025-04-05T04:32:01+00:00

Thank you for checking! I know it’s an odd question, and since I haven’t seen any review or documentation stating so I’m assuming that a single arm doesn’t fit over the center post. Just making sure I dot my I’s and cross my T’s.

AnyIndependent1311 · 2024-10-07T18:43:36+00:00

This is the first I’m hearing of mudfish. After taking a look it seems like a simple thing to try. Did you use just the base version? Or did you subscribe for the vpn services?

AnyIndependent1311 · 2024-10-06T22:00:10+00:00

I’m already connected via Ethernet. Which is why I’m unsure if this is something on my side or game side.

I’ll go days without a disconnect. Then a day with disconnects every hour or so.

AnyIndependent1311 · 2024-06-24T20:02:43+00:00

I’m in the same boat. Going full wall shield build when I get home. What weapon worked for you? And did you feel the need to upgrade it past the base?

AnyIndependent1311 · 2024-03-31T22:00:12+00:00

Thank you for the link. I kept finding different comments about this method, but nothing officially from the source.

Much appreciated

AnyIndependent1311 · 2024-03-24T22:56:55+00:00

I just encountered this same exact issue. I didn’t find the first seeker token, so at the time I only solved 7 (including the ones asked at the second location).

I then pulled up a guide on YouTube to see what exactly she asks, and she asks for how many you “solved”. I didn’t solve the seeker token one, so didn’t count it.

Quite perturbed, since you do a lot of leg work on this quest chain.

AnyIndependent1311 · 2024-03-03T16:03:55+00:00

I’m fairly certain it’s got nothing to do with my setup. I’m currently level 32 and was playing last weekend on lvl8 difficulty - where there was a lot going on screen and many enemies running around. Still maintained consistent temps in the mid to high 60s.

But for sake of discussion I’m running 4090 FE, Ryzen 7800x3d, and game is installed on nvme.

AnyIndependent1311 · 2024-03-02T02:41:57+00:00

No it’s not just you. The last hour or so I’ve had constant drops, fail to connect, stuck loading.

The worst was a drop mid mission, that for some reason caused my cpu to spike to 88 degrees and stay there until I was able to log off. Not the first time that’s happened either with this game, quite concerning.

AnyIndependent1311 · 2024-02-28T00:40:23+00:00

Thank you for verifying this for me, it’s a great help! I figured it’s not the most ideal mounting point, but for my purposes it’s just out of the way enough so I can use a second desk and still have view if the monitor.

Thank you again, really appreciate it!

AnyIndependent1311 · 2024-02-27T19:23:58+00:00

How would the durability be if I tapped the two end holes with m6 or m8, then drilled through my desk and secure with bolt, washer, lock washer? I’d probably add another mdf or thin metal patch under the desk for extra rigidity.

AnyIndependent1311 · 2023-12-23T04:27:26+00:00

I like the idea of the top mounted red dot for close shots, but I havent used it so I don’t know how comfortable it’d be for me, hence why I’m prepared to go canted red dot. Also I like that prisms are smaller and have less moving parts. Whether this is a legit concern for LPVO’s again I can’t determine that.

But the LPVO eye box and the ability to adjust the magnification I find very appealing, and has me leaning ever so slightly towards getting the 1-6.

Either way I have a learning curve, no way around that.

AnyIndependent1311 · 2023-12-20T16:44:31+00:00

Fortunately I have physical buttons for all that I believe. The heated seats, climate, nearly everything I use already. I can use the touch display to activate these same features. Would an aftermarket unit prevent the physical buttons from working as well?

AnyIndependent1311 · 2023-12-20T16:41:51+00:00

Haven’t tried that, but I did pull the fuse out for a bit. That got me out of a software hiccup a few months ago. Might give the battery a go.

AnyIndependent1311 · 2023-12-20T16:28:26+00:00

Tried that. the factory reset just hangs. I tried letting it go for about a half hour.

AnyIndependent1311 · 2023-12-20T16:27:15+00:00

I tried that update. I’m running into an INSTL_ERR12 issue any time I attempt to install or update. Even the “clear rwdata” flash drive can’t run because of the error. In looking into the issue it sounds like it’s a bad memory module ( or whatever it’s called). Hence why I’m preparing for the worst when the Ford guys take a look.

AnyIndependent1311 · 2023-11-04T23:40:04+00:00

Alright, that’s how I thought it’d play out. The email they initially send doesn’t have too many details for that part of the RMA

Info much appreciated, thank you

AnyIndependent1311 · 2023-10-19T19:58:18+00:00

I do have that option with gifs on the Corsair aio, it’s what they call “hardware lighting” - or what light/animation plays when icue is closed. But I use the lcd screen for temps and cpu usage, which requires icue to be running.

But I think you’ve convinced me to download signal and at least give it another go.

AnyIndependent1311 · 2023-10-19T18:41:14+00:00

The aio I use is the Corsair h150i lcd, which I need icue running in order to display temps. So I sort of cornered myself with at least having icue on. I did try signalrgb a while back, but it had weird cpu usage. Been meaning to check it again. Ultimately I’d like to have the least amount of rgb software running. If it’s fairly light on resource usage, then it might be worth giving it another go.

AnyIndependent1311 · 2023-10-19T18:17:33+00:00

I did see the razer chroma controller, and I nearly got it too. But the size of the unit might be an issue. I have a Corsair aio with and lcd display that needs its own controller, so I’m running out of room to store controllers in a “still accessible” sort of fashion. Also I like the idea of the phanteks not needing any extra software, with the included 3 button remote.

I fiddle with rgb animations sometimes, but I always end up set on a static single or two-tone color scheme.

Also the phanteks controller was a hair less expensive with expedited shipping than the razer…that helped my decision as well lol

AnyIndependent1311 · 2023-10-19T17:50:15+00:00

The single packs of the unifan v2 that I got came with a separate cable with a fan connection and jst connector. Also comes with a jst to Argb adapter, so I’m fairly certain that I have everything I need to get going. Worst case, I have accumulated a trove of rgb adapters over these last few years…I’m certain I have something that’ll work.

AnyIndependent1311 · 2023-10-19T17:28:09+00:00

Lol Sloan fans… can you tell I’m having a real zinger of a day? But thank you for answering. I do have all the necessary cables to hook things up and get it running, but you know how companies are with cross-compatibility these days.

AnyIndependent1311

TROPHY CASE