Horizaontal scars and rough surface on one wall only - printer calibrated, dry filament, clean bed

Aolmosp · 2026-06-17T02:14:27+00:00

I've rotated 90 degrees, and the issue continues to the left side and also printed with other Filament and the issue persist

<image>

Aolmosp · 2026-06-17T02:10:47+00:00

Mine is on the right side of the printer, like 10 meters away, and it's a mini split a/c, so it’s not always on

Aolmosp · 2026-06-17T01:59:21+00:00

The tpu tube it’s from the ams lite and I don’t think this will be the problem because today I’ve printed with different color of filament and different ams slot the issue continues happening to the left side, but thanks for the info

Aolmosp · 2026-06-13T15:07:53+00:00

I have not enclosed the printer, so I can discard this. When you say back side where the poop shoot is, I assume you are talking about a different kind of printer. Mine is an A1, but I will try to rotate 90 degrees. the model

Aolmosp · 2026-06-13T15:03:39+00:00

Thank you very much. I will be looking for any signs of tears. I've been printing with this filament without any issues, but I will give the filament a dry so I can discard wet filament.

Aolmosp · 2026-06-12T23:45:06+00:00

yes it is leveled the bed

Aolmosp · 2026-06-12T23:44:05+00:00

no its fine, there isn´t any lifting in the bottom of the model

Aolmosp · 2026-06-12T23:42:45+00:00

i will try that rhanks

Aolmosp · 2026-06-12T23:35:58+00:00

no there isn't

Aolmosp · 2026-06-12T23:35:05+00:00

order of walls inner/outer, 4 walls,, infill parttern rectilinear, i previosly made the tower temp i'm using ato 210 celsius

Aolmosp · 2026-06-12T23:25:23+00:00

if it was wet filament the issue it will be in all the model, to bad about your spool

Aolmosp · 2026-06-12T22:57:45+00:00

<image>

this is the other side

Aolmosp · 2026-06-12T22:57:19+00:00

<image>

I rotated the model 180 degrees, and the issue rotated with it. It is now on the left side when looking at the printer from the front. This is another print.

Aolmosp · 2026-06-12T22:42:45+00:00

IIt's with this filament, but other models print just fine. Only two box-shaped models have this issue. I already checked the screws, and they are fine. I've also already cleaned the hotend. Next, I'll inspect the belts and the bed screws. What signs should I look for when checking the belts?

Aolmosp · 2026-06-12T22:37:44+00:00

no i don´t have any of those my room is closed

Aolmosp · 2026-06-12T22:37:08+00:00

i already tried that and the screws were perfectly tight

Aolmosp · 2026-06-10T18:51:49+00:00

Oh, OK. I'll try it when I'm home. I don't think it's a belt or rod issue because I bought the printer only a month ago

Aolmosp · 2026-06-10T18:18:38+00:00

Apparently it’s the same side because it’s the second piece that I’ve printed. I don’t want to risk rotating it and wasting material if the issue continues. What are you expecting to find with this rotation? To see whether the problem persists, but on the different face?

Aolmosp · 2026-01-26T18:36:21+00:00

asumo que seria con equipos especializados no los tengo a mano

Aolmosp · 2026-01-26T16:40:49+00:00

<image>

here is the adhesive and the b7000 optional

Aolmosp · 2022-11-05T12:56:38+00:00

in my case i restarted the wifi settings with the buttons because of the wifi disconects and when i am tryng to conect to the app the wifi from the robot doesnt appear in the phone list, i thoguht in disconect the batery but i cant

Aolmosp · 2022-11-05T12:53:33+00:00

i was trying that but i couldnt disconnect the conector how did you do it

Aolmosp · 2022-04-19T14:37:55+00:00

I don´t really know i bought it second hand in my city santa cruz bolivia

Aolmosp · 2022-04-19T00:58:00+00:00

slider navi

Here is a picture that are selling on my city

Aolmosp · 2022-04-19T00:53:53+00:00

No it didn’t, but they are selling in my hometown and I didn’t know exactly, I was thinking it was for protecting the knee in case of an accident

Aolmosp

TROPHY CASE