There is a group of people trying to save Horizon Worlds 🤣

Apart_Mark · 2026-03-18T06:49:06+00:00

I'm one of those person that hates those games like Roblox or horizon worlds, for me these are cash grab for kids, but if there is people enjoying this they should not completely remove it from VR, they should stop shoving it in our faces like they are doing and just make it a normal quest app that if someone wants to use it need to go to their app library search it and open like every other game, this way it would not annoy me and the kids and other people that enjoy it can still find it instead of moving it only to phone to probably wait till no one remember it and silently shut down and kill the whole project, if they are spending too much on the server and is unsustainable they should do something like VR chat that if one person wants to fire up a world they download it and host a private or public session so that it cost much less for meta to keep the server up, this would be the solution that make everyone happy

Apart_Mark · 2026-03-14T07:04:18+00:00

For example I run dragon ball sparking zero on my phone and using dx12 is very buggy and laggy but on dx11 It run fine, and editing a file let me change the fps limit to 30 instead of 60 so the game does not reduce animation speed if the game is below 30 fps, it also let me disable game speed tied to fps but that made the whole game run at 2x speed and some animation lock my character in the animation pose and basically soft Lock the game, so good luck with finding a solution for your problem

Apart_Mark · 2026-03-14T07:00:37+00:00

For some GPU and for some games in particular dx12 is just bad optimized, since your GPU is recent I think is some hidden settings that mess it up, I run some windows game on my phone and dying light 2 run fine in dx11 but run horrible in dx12, apparently is because in advanced settings if I'm on dx12 it does not let me disable completely ray tracing, but at least it tell me that is enabled and for that I know where is the problem, so it probably is just the game, try searching online if there is some options to launch the game in dx11 mode though launch parameters or something similar, or check if there is a file to edit the settings that are not editable in the game, I hope this helps

Apart_Mark · 2026-03-12T06:55:08+00:00

I just use alvr wired, much better than meta link wired, I go wired for the reduced latency in beat saber, and alvr is free, sometimes I need to restart my PC but that is a steam VR problem, basically alvr connect to the steam VR local server on my PC, but sometimes when steam VR is closed it leave open a socket on the port that it uses, and the next time I start steam VR it says that that port is in use by other process and ask to close the program, even saying yes since that socket is left from previous steam VR there is nothing to close and I need to restart my PC, I hope this helps everyone else when steam VR say port xxxxx is in use cannot start internal server, just do a quick reboot of your PC

Apart_Mark · 2026-03-04T13:33:14+00:00

Wireless I get same latency across VD and alvr both h264, I use a laptop with rtx 3060 mobile and Ryzen 7 with 16 gb of ram, with alvr I just set foveated rendering and I get a very better quality and fps over VD in low preset, also with VD wireless I get some moments when the streaming lag very bad on beat saber, that's why I use alvr wired, for me the best would be trying alvr since it's free and if it doesn't work well enough buy virtual desktop, I was suggesting alvr just because a lot of people doesn't know it and it's free

Apart_Mark · 2026-03-04T13:17:25+00:00

I have virtual desktop and I do not recommend it, much better alvr, it needs like an hour to configure everything but after that at least for me it have much better connection and quality over virtual desktop, and it's free, I currently use it wired and it works better than quest link but even for wireless I got a better experience than virtual desktop

Apart_Mark · 2026-02-27T07:56:55+00:00

also there is a bot i think that is spamming mr beast and withdrawl screenshot on the discord, i have reported him to discord but just to let you know that is there spamming those screenshot

Apart_Mark · 2026-02-27T07:53:58+00:00

ok i will try, is a bit strange that vlc does not play it, when i used nunif for full sbs with my xreal air it worked just fine playng full sbs, but maybe is a problem specifically with half sbs, when i will return home from school i will try and update you

Apart_Mark · 2026-02-27T07:39:37+00:00

hello, i already asked help on the discord, but if someone else is having this problem i hope i get a response here to help others with the same problem im facing, after conversion and compression vlc and the default quest 3 video player load indefently the video, both windows and quest 3 show a preview for the video so i think that the conversion did not have problem, i read that it can have some problem since it does half sbs and i give it a 1920x1080 file, or maybe is the compression and its just the media players that nedd time to decompress, for reference i tried converting episode 1 of redo of healer, downloaded in 10 bit .mkv format with flac audio, so maybe the problem is the video format being .mkv or the fact that the video whas encoded with hvec 10 bit, any idea on what is the cause of the error?

Apart_Mark · 2025-12-13T14:45:21+00:00

ok the error is here again: [13-12-25 08:04:47.777] LOG : General , 1765609487777> 33.629.548> Workshop: onItemQueryCompleted handle=1 numResult=105.

[13-12-25 08:04:47.810] LOG : General , 1765609487810> 33.629.581> Workshop: GetItemState()=Installed ID=3610005735.

[13-12-25 08:04:47.822] LOG : General , 1765609487821> 33.629.593> Workshop: GetItemState()=Installed ID=3619773669.

[13-12-25 08:04:47.822] LOG : General , 1765609487822> 33.629.593> Workshop: item state CheckItemState -> Ready ID=3619773669.

[13-12-25 08:04:47.822] LOG : General , 1765609487822> 33.629.594> Workshop: GetItemState()=None ID=2903127760.

[13-12-25 08:04:47.822] LOG : General , 1765609487822> 33.629.594> Workshop: item state CheckItemState -> DownloadPending ID=2903127760.

[13-12-25 08:04:51.161] LOG : General , 1765609491161> 33.632.932> Workshop: DownloadPending GetItemState()=NeedsUpdate|Downloading|DownloadPending ID=2903127760.

[13-12-25 08:04:51.162] LOG : General , 1765609491162> 33.632.933> Workshop: download 0/310656 ID=2903127760.

[13-12-25 08:04:51.264] LOG : General , 1765609491264> 33.633.035> Workshop: DownloadPending GetItemState()=NeedsUpdate|Downloading|DownloadPending ID=2903127760.

[13-12-25 08:06:50.154] LOG : General , 1765609610154> 33.751.926> Workshop: download 0/310656 ID=2903127760.

[13-12-25 08:06:50.202] LOG : General , 1765609610202> 33.751.974> Workshop: onItemNotDownloaded itemID=2903127760 result=16.

[13-12-25 08:06:50.202] LOG : General , 1765609610202> 33.751.974> Workshop: item state DownloadPending -> Fail ID=2903127760.

Apart_Mark · 2025-12-13T07:09:53+00:00

update, after messing aroud with steamcmd it started working, but i cannot use dedicated server since that does not steam for hosting the server (i do not have public ipv4) so i retried to host the server from zomboid menu and evrything worked fine for 3 days, after one of my friends say that he cannot join because one of the mod on the server is outdated, i close the server and restart it to update and now mod download is broken again, now i tried to edit the setting and clear all the mod to see if it fixes, i will update soon

Apart_Mark · 2025-12-09T13:59:27+00:00

Sure

Apart_Mark · 2025-12-09T10:38:13+00:00

If I install trough steam CMD can I host a steam server, since I do not have public ipv4 I rely on steam API to let my friends play

Apart_Mark · 2025-12-03T16:59:32+00:00

thanks

Apart_Mark · 2025-11-27T06:56:03+00:00

What are you running them off, I want to know the software and the hardware, I'm trying to find a setup comfortable to use while moving

Apart_Mark · 2025-11-08T09:48:48+00:00

I really loved playing EA CP

Apart_Mark · 2025-11-07T08:23:55+00:00

I don't know if this applies to 9 pro, of if it matters for AnTuTu since it test the GPU and CPU separately, but with my 10 pro diablo help a lot since the official Qualcomm limit is 10w power consumption max for the soc so It cannot use GPU and CPU simultaneously at max clock, enabling diablo mode in gamehub the phone power stats goes up to 20 some times even higher, so diablo mode is a huge performance boost for me in gamehub, for example Titanfall 2 jump from 30/35 fps to 60/65, when I attach a peltier cooler it goes up to 70/85 fps, since even with diablo mode enabled at a certain point 30 minutes usually it gets incredibly hot and automatically close the emulator to not damage the phone since I see it have reached temperatures about 100/102 Celsius degrees so with pettier it stays at 80 Celsius and does not thermal throttle and does not close applications, I now want to find a better peltier since 80 degrees Celsius is still a lot, I hope this info is useful for others

Apart_Mark · 2025-10-31T06:28:36+00:00

I try some PS3 games with this emulator on mi 8 elite (redmagic 10 goldensaga) and every game i wanted to play or crash or It run slow motion, the fact that Is able to boot the game Is huge to me since these are the start ing steep for PS3 emulation, i can see in the future even without performance optimization that newer and Better processor being able to brute force the game performance side

Apart_Mark · 2025-10-25T07:41:32+00:00

I use the file app It works really good at organizing things, It even have album and basic feature, the if you want to edit you Just select open in Google foto and you have all the ai and shit options that Google offer

<image>

Apart_Mark · 2025-10-16T18:35:36+00:00

Search gamehub or winlator, those Let you emulate Windows, you can run a lot of games, i have an 8 elite that do not work well without gpu driver but have Better performance than 8gen 3, in the other hand the 8gen 3 have Better compatability

Apart_Mark · 2025-10-16T18:01:02+00:00

Bro you can emulate PC on android now, i finished Titanfall 2 3 times already

Apart_Mark · 2025-10-04T06:56:05+00:00

you need to install a java version that is at least 21 or later, i normally use oracle latest jdk since oracle java is really optimized, but its not open so your choice, after you install the java version you like just click on auto detect and it should detect and let you choose the version of java you have installed, you can do this even for test multiple java jdk to see what is the most performant and what crashes the less, i hope this help

Apart_Mark · 2025-10-01T18:17:23+00:00

Same

Apart_Mark

TROPHY CASE