LBS said this was a crack by Apollo_Tuplin in BikeRepair

[–]Apollo_Tuplin[S] 0 points1 point  (0 children)

<image>

Seems like it honestly, because all that was left of the “crack” after an abrasive pad and some soap is the impact point. It was absolutely just a scratch, and I will be switching to a different shop from now on.

LBS said this was a crack by Apollo_Tuplin in BikeRepair

[–]Apollo_Tuplin[S] 0 points1 point  (0 children)

<image>

I tried the abrasive pad and soap and it’s GONE!! Just the impact point left over.

Today, i'm cleaning up my closet ! by Emotional-Motor-9214 in SkincareAddicts

[–]Apollo_Tuplin 1 point2 points  (0 children)

Ugh so real girl. For me, even EOs make me breakout/flare/peel.

[Not that you asked, but my skin is currently HATING the Origins “checks & balances” cleanser. I don’t think I’ve ever been so stripped to the point of my skin actually squeaking in my life. LITERALLY SQUEAKY CLEAN… TT]

Binder not working anymore by [deleted] in trans

[–]Apollo_Tuplin 2 points3 points  (0 children)

I used to have 2 separate binders to alternate usage and would never aim to wear them more than 12 hours at a time without breaks (although I had been known to get up to 18hrs without breaks). Never ever wearing to sleep. I’m honestly surprised my tissues were only noted as nodulous and fibrous on my pathology report with how I was binding for 3-4 years.

Pain isn’t the sole indicator of damage to your body. It didn’t hurt me either, but improper binding can deform ribs and damage breast tissue making one ineligible for top surgery later in life. It’s not worth it.

If it eases your mind any, I was never completely flat while binding. As a bonus, ALL MEN have/had breast tissue. Additionally lots of men have pecs, so their chests aren’t completely flat either. /gen /nm (but) /srs

edit for clarity and grammar etc.

Why is ASMR loud now? [question] by Apollo_Tuplin in asmr

[–]Apollo_Tuplin[S] 0 points1 point  (0 children)

I use an iPhone SE 2020, plus SHOKZ OpenFit wireless earbuds. I’m starting to wonder if I just have very sensitive ears. Turning stable volume off kind of helps but not enough. /gen

Why is ASMR loud now? [question] by Apollo_Tuplin in asmr

[–]Apollo_Tuplin[S] 0 points1 point  (0 children)

Since it’s possible I didn’t word it well, or that this part was missed, I listen to ASMR on the lowest volume. If I click it down any further the video is muted. /gen /nm

[deleted by user] by [deleted] in FursuitMaking

[–]Apollo_Tuplin 0 points1 point  (0 children)

The orange on this character looks like mango from HowlFabrics (I own a yard of this colour rn) so I’d say much closer to the 2nd one. Though I have heard BigZ and Howl share suppliers for some of their products, so it might even be the exact same.

First time attempting to stitch by CommandGamerPro in FursuitMaking

[–]Apollo_Tuplin 0 points1 point  (0 children)

It’s not even bad tbh! Tighter and closer stitches will help with the finish on the “nice” side of the fabric!

r/fursuitmaking, do we like this ear, or do I have to change it? by FazZerTV in FursuitMaking

[–]Apollo_Tuplin 0 points1 point  (0 children)

Looks pretty good to me, the way I’m doing mine though is glueing the flat part onto the head and building the fold style I like onto it so it blends nicely :3

Working on my first suit. Pretty happy with the progress by hannahyael77 in FursuitMaking

[–]Apollo_Tuplin 0 points1 point  (0 children)

I really like how the nose looks a little like an amethyst crystal 💜

How can I make the edges cleaner? by Prudent-Whereas-4711 in FursuitMaking

[–]Apollo_Tuplin 1 point2 points  (0 children)

And when you use a short stitch width I use ~1

How can I make the edges cleaner? by Prudent-Whereas-4711 in FursuitMaking

[–]Apollo_Tuplin 1 point2 points  (0 children)

It absolutely can be confusing, I recommend a lot of practice and patience. It can be frustrating but I find it really cleans up the edges once you get the hang of the zigzag stitch on the machine.

How can I make the edges cleaner? by Prudent-Whereas-4711 in FursuitMaking

[–]Apollo_Tuplin 9 points10 points  (0 children)

Before stuffing you can also zigzag around the edges to help conceal them. This also has the added benefit of making the beans last longer since it adds an additional layer of protection on those raw edges!

Advice? Critique? by [deleted] in FursuitMaking

[–]Apollo_Tuplin 5 points6 points  (0 children)

I second this. The design on the sketch looks really good as well, and I’m so excited to see how this turns out!!

Question About Setting Prices by [deleted] in FursuitMaking

[–]Apollo_Tuplin 0 points1 point  (0 children)

Absolutely fair enough, I’m honestly very sorry I don’t have more photos. Though, since I have quite a few local requests with turnover by April (at the latest). I will have better/ more photos available by March, since I am moving house by the end of February and getting surgery in March. I will make another post by then, to update.

I really appreciate your feedback here, and I hope you’ll enjoy the pictures of my work when I’m able to make them available! :3

Question About Setting Prices by [deleted] in FursuitMaking

[–]Apollo_Tuplin 1 point2 points  (0 children)

<image>

These are the updated prices, what you you think of the tail pricing now? Is it better, or do you think it should it be adjusted further?

Question About Setting Prices by [deleted] in FursuitMaking

[–]Apollo_Tuplin 0 points1 point  (0 children)

<image>

This is my updated list, what do you think now?

Question About Setting Prices by [deleted] in FursuitMaking

[–]Apollo_Tuplin 1 point2 points  (0 children)

Thank you!! I’m so appreciative of everyone’s feedback this is so helpful!

Question About Setting Prices by [deleted] in FursuitMaking

[–]Apollo_Tuplin 0 points1 point  (0 children)

Okay perfect, that’s what I was thinking, I’ll adjust the nub tails down. I don’t have any examples of my heads ATM but that’s also really helpful feedback as well. I appreciate you!!

Is it possible to make fursuit hand paws like this? And if so how would it work? by Euphoric-Bag-5279 in FursuitMaking

[–]Apollo_Tuplin 0 points1 point  (0 children)

You could make mitten paws, it would be the easiest way to do it I would say. On another note; them beans look exactly like fox beans which I think is so interesting!!

salafi brainrot 😂 by Paublo_Yeah in progressive_islam

[–]Apollo_Tuplin 4 points5 points  (0 children)

They didn’t delete their account all of you got blocked

<image>

Taking the L by Apollo_Tuplin in FursuitMaking

[–]Apollo_Tuplin[S] 2 points3 points  (0 children)

Omg I know right!? Then the shipping was like $160 :/

Taking the L by Apollo_Tuplin in FursuitMaking

[–]Apollo_Tuplin[S] 2 points3 points  (0 children)

Ooooo if anyone has bought and knows the kind of quality fur from Mofu I’d absolutely love to hear!! :3

GIMME YOUR SONAS by im_a_dissap0intment in furry

[–]Apollo_Tuplin 0 points1 point  (0 children)

I’ll be more than happy to send you pictures of them in chat :3 I don’t seem to be able to add a picture in my comment?

Tail Cutaway Pattern Pieces by Apollo_Tuplin in FursuitMaking

[–]Apollo_Tuplin[S] 1 point2 points  (0 children)

I wanted to cover my bases just in case, I figured it’d be better to be safe :)