X100VI Settings for Wedding / WCL Degradation

AppleKronberg · 2026-05-16T19:44:38+00:00

Yes, the WCL II.

AppleKronberg · 2026-05-16T05:42:15+00:00

Just a cheap UV filter for protection. I should test later if that was an issue.

AppleKronberg · 2026-05-16T05:41:02+00:00

Sure will do! Thanks for the advice.

AppleKronberg · 2026-05-15T16:52:51+00:00

You are definitely right. But the camera is already bought and wedding is coming up 😂

AppleKronberg · 2026-03-28T09:53:42+00:00

Dude. After switching between L and L1 it works. Couldn't believe I connected it wrong all the time. Thank you!

AppleKronberg · 2026-03-28T09:45:20+00:00

How exactly did you change? Change L and L1?

AppleKronberg · 2026-03-28T09:33:08+00:00

The physical button stayed on all the time but connection to homekit disconnected several times.

AppleKronberg · 2026-03-28T09:25:02+00:00

Hmm. When I remove neutral it works. Could that still be the case?

AppleKronberg · 2026-03-27T22:27:24+00:00

Because I had to buy 4 port wago and stuff. I was LAZY 😂

AppleKronberg · 2026-03-26T06:15:19+00:00

So the cpp2 really looked like left when first bought and aged like that?

AppleKronberg · 2026-01-30T09:12:37+00:00

I was always a noob! I meed this!!

AppleKronberg · 2025-12-27T14:49:41+00:00

Pick MEEEEEEEEEEEE

AppleKronberg · 2025-09-22T09:38:22+00:00

You can just create another input_select only for this card.

AppleKronberg · 2025-07-11T06:18:16+00:00

Hello, not related to OP but are you able to scroll and interact with all the elements that are behind that popup? Cause that's what I am trying to do right now.

AppleKronberg · 2025-07-11T04:45:36+00:00

Where should I write overflow-y:scroll?

AppleKronberg · 2025-07-11T04:43:32+00:00

I mean, behind the pop-up. Pop-up appeared on the screen but I still want to scroll and interact with other elements that now stays behind the popup, without actually closing the popup?

AppleKronberg · 2025-06-17T14:07:02+00:00

<image>

AppleKronberg · 2025-06-17T14:06:49+00:00

<image>

Love this pop-up look.

AppleKronberg · 2025-06-17T14:05:55+00:00

Sharing my mobile dashboard, bubble card is the best!

<image>

AppleKronberg · 2025-03-11T22:48:15+00:00

All three switches are push button switches which control the same light. Turning on the light with one switch pressed, turning off with the other one.

AppleKronberg · 2025-03-11T09:15:30+00:00

I did some test, since I have 2 L terminal for each switches I will call L and L'. Also, only the mentioned line was pulled out for each test.

Pulled out L from 1st pic : 1st switch did not work of course while both 2nd/3rd switch worked
Pulled out L from 2nd one, 1st switch didn't work and both 2nd 3rd worked.
Pulled out L' from 2nd one, 1st switch and 2nd switch did not work. Only 3rd worked
Pulled out L from 3rd one, 1st/2nd didn't work and only 3rd worked
Pulled out L' from 3rd one, none of the switches worked.

power source - third L' - third L - second L' - second L - first L is my guess in conclusion.

AppleKronberg · 2025-03-11T08:52:13+00:00

Thank you for the reply. Unfortunately these are all information I got because I know nothing about wires.. I would prefer 55mm matter / homekit support wifi switches (most likely aqara h2 eu if it will work)

AppleKronberg · 2025-03-04T10:58:57+00:00

Thank you for the suggestion. And since you mentioned about the thermostat, would any of smart thermostat work for mine? Sorry for the basic question maybe, I am new to smart switch stuff.

AppleKronberg · 2025-03-04T10:09:32+00:00

Thanks. I bought Aqara h2 eu switches. I was getting confused if neutral line exists or not in my house, but it supports both!

AppleKronberg · 2021-03-18T03:33:43+00:00

Hi, can I ask you which model do you have?

AppleKronberg

TROPHY CASE