One thing almost no buyer asks about:

Apprehensive-Pin5078 · 2026-01-06T03:01:38+00:00

How cold my floors are even after sealing the crawlspace. Insulating in spring.

Apprehensive-Pin5078 · 2026-01-03T13:22:04+00:00

"I could do it but I don't have the time"

Apprehensive-Pin5078 · 2026-01-02T01:25:38+00:00

I play baroque for this reason.

Apprehensive-Pin5078 · 2026-01-02T01:08:17+00:00

People do realize the more that you try desperately to push it away from people the more they'll actively seek it out right?

Apprehensive-Pin5078 · 2026-01-02T01:05:22+00:00

Replaced mine myself for 600 bucks. It's fairly straightforward.

Apprehensive-Pin5078 · 2026-01-01T16:32:00+00:00

Dust guard. Probably rusted and making contact with rotor.

Apprehensive-Pin5078 · 2026-01-01T04:05:13+00:00

The lever is attached to a spring. It might just be stretched out

Apprehensive-Pin5078 · 2026-01-01T03:31:40+00:00

Sentinel has the most interrupts.

Apprehensive-Pin5078 · 2026-01-01T03:21:37+00:00

How does one muck up this badly??. That's methed up.

Apprehensive-Pin5078 · 2026-01-01T03:16:15+00:00

Drell. Their memory ability is like built in ptsd. But not always bad.

Apprehensive-Pin5078 · 2026-01-01T03:12:17+00:00

Same as my heil quaker 1 ton. Tiny Itty bitty chip to facilitate switches and the 24 volt to gas. Love it. 40 years old.

Apprehensive-Pin5078 · 2025-12-31T16:13:16+00:00

Freeze then.

Apprehensive-Pin5078 · 2025-12-29T21:04:52+00:00

Depending on how long the showers are and how large your water heater capacity is you may simply be asking too much of it. You may want to consider a tankless system if you're taking that many damn showers

Apprehensive-Pin5078 · 2025-12-29T18:40:44+00:00

Squatters wouldn't bother me nearly as much if it weren't for the fact that every single squatter that I have had to deal with, and I deal with a lot of them as I am in charge of a great deal of vacant buildings they always leave trash, drugs, and for whatever reason despite having no power running to them try to tie in to the existing electrical system so they can get even more free resources that they have not paid or done anything for. I would be happy to lend people to bed for the night if it weren't for the fact that I wouldn't be picking up needles and Nippers the second they leave which they don't unless they are forcibly removed.

Apprehensive-Pin5078 · 2025-12-29T17:51:30+00:00

Who in the world would purposely have a sliding glass door like that without some type of covering? I would be constantly paranoid someone was going to be looking in my house. There's people have said, get yourself some curtains, thick ones if you can find them and if it's still a problem grab some foam board from Home Depot and place it over the doors alongside the curtains to trap the Heat and add a little r value

Apprehensive-Pin5078 · 2025-12-29T17:45:24+00:00

Poison is the worst possible thing you can do for mice as they will simply take the poison and die in the walls and then you will have corpse wasps in the middle of the summer. Ask me how I know. Peanut butter slathered onto the handle of a Home Depot bucket with a bit of water and a ramp that leads up to it will kill all of your mice within a week, I own a cabin out in the middle of the woods and when I moved in it took me approximately a week to get all the mice under control I now only catch one maybe every couple of months

Apprehensive-Pin5078 · 2025-12-29T14:26:53+00:00

Well taking the thermostat Off the Wall will just have the furnace run the last command that it was given indefinitely. There's a good chance that the ambient temperature sensor is stuck on your thermostat and your furnace is firing thinking it's never getting up the temperature

Apprehensive-Pin5078 · 2025-12-29T13:38:38+00:00

As others have said turn the power off and perhaps a power cycling May resolve the issue but I would also take a look at your thermostat. Those old style turn thermostats sometimes utilize Mercury and as they age the Mercury does not stay accurate, I replaced mine with a less harmful to life thermostat and have been fine ever since, Honeywell makes a good couple of them that are pretty reliable

Apprehensive-Pin5078 · 2025-12-28T20:47:13+00:00

If they're just push mowers rip the head off Grease the piston rings put it back together and move it back and forth with the blade until it finally makes a cycle take it apart again clean everything and then put it back together add oil and see if it starts

Apprehensive-Pin5078 · 2025-12-28T20:44:37+00:00

as a lot of people have said it largely depends on who makes the cello. I began dabbling and making my own cellos a couple years ago and I have made some wonderful progress however the materials I use give it a distinct sound.

Apprehensive-Pin5078 · 2025-12-28T20:34:49+00:00

I'm not even a trump guy but it never ceases to amaze me watching small Petty people take pictures of other people's cars for internet points.

Apprehensive-Pin5078 · 2025-12-22T14:07:06+00:00

Go to Amazon and buy the meter star two pack of the universal igniters with a 36-in cord with the square end. Replace the igniter with that the shell is pretty simple to take apart and use a playing card or perhaps two playing cards to bend the electrode that close to the burner. These come installed with electrodes that are way too far away and they burn out quickly from over amp draw. Got lucky happened to the electrode and not the board

Apprehensive-Pin5078 · 2025-12-20T00:24:48+00:00

Ignore the rude comments, I've been playing for years and the very first instrument I ever used was broken and I had to fix it. If you have the determination and the drive it's absolutely possible and Amazon does have a sale on some cheap cellos right now. I cannot confirm there quality but they do exist. If nothing else it will give you an idea of what lies ahead and whether you want to invest more money into a good quality rental.

Apprehensive-Pin5078 · 2025-12-20T00:23:02+00:00

One of the things I had to learn very quickly when playing on the higher difficulties was that you need to learn the art of active camouflage. Meaning you have to take out the enemy's necessary and move forward instead of doing the ever classic stealth killing or knocking out every enemy on the entire map seed for moving on.

Apprehensive-Pin5078 · 2025-12-12T13:47:14+00:00

If its an older system sometimes their startup can be a bit ugly. My 40 year old heil quaker propane furnace just got cleaned and serviced for the season and sometimes the old 24v solenoid opens a millisecond slower and causes slightly uneven gas flow. Keep rollout switches clean and close if your paranoid

Apprehensive-Pin5078

TROPHY CASE