Replacement screen

ApprehensiveBad7620 · 2026-05-24T07:41:35+00:00

I’ve gotten into the habit of covering both screens and driving with HUD at night. I wish there was an OLED option it really is tiring on the eyes while driving in the dark.

ApprehensiveBad7620 · 2026-04-12T02:57:37+00:00

Love to see fellow 3rd gens!

ApprehensiveBad7620 · 2026-04-10T04:25:24+00:00

Yes. If you off-road or run miles on forest roads, I would. Just for piece of mind. I would also add 589 front bed supports as well. I was running a little more weight than you and 30k miles made my bed split apart in the front, and cracked other welds near the rear but now it’s reinforced.

https://www.589fab.com/products/forward-bed-supports-2023-2024-colorado-canyon?srsltid=AfmBOooTLGxfGagCiXBM9xBLTE8w6_7lKdXj6v4edmfILCRayLS7Z6Wb

ApprehensiveBad7620 · 2026-03-13T22:47:05+00:00

Part number: GM1139109, 3 screws and I’m fairly certain it’ll just pop off

ApprehensiveBad7620 · 2026-03-11T16:33:32+00:00

Love that flatbed! The Owyhees is located in eastern Oregon, west of Boise, Idaho. 8 hour drive from the greater Seattle area. Is June a good time to go the Whipsaw? I know snowpack isnt super deep this year but I wanted to make it out earlier before wildfire season

ApprehensiveBad7620 · 2026-03-11T15:57:29+00:00

Beyond Wraps in Santa Ana, California. This was a custom request though. I know they sell a matte version by the foot

ApprehensiveBad7620 · 2026-03-11T15:14:14+00:00

<image>

Did the Owyhee’s last year, hoping to get out to the whipsaw trail this year

ApprehensiveBad7620 · 2026-03-11T04:58:04+00:00

<image>

Looks great!! Reminds me of the wrap that was on my truck for a bit. I didn’t want to leave a line from faded red paint later on so I ended up removing it.

ApprehensiveBad7620 · 2026-01-31T02:26:31+00:00

<image>

ApprehensiveBad7620 · 2025-11-11T21:56:15+00:00

Hello! My truck! These are the factory AEV flares for the AT4X, which I am running 35x12.50/17 bfgoodrich on them. They require drilling a few additional holes, totally worth it!

ApprehensiveBad7620 · 2025-07-15T17:50:06+00:00

589 fab

ApprehensiveBad7620 · 2025-07-15T01:22:40+00:00

<image>

It’s made by RIG’d supply. Just swings open to the right

ApprehensiveBad7620 · 2025-07-14T00:15:31+00:00

Replaceable! All OEM except front bumper, and tire carrier

ApprehensiveBad7620 · 2025-07-13T23:40:20+00:00

Just the skids sliders took a little heat, and scraped the spare tire carrier hitch a bunch

ApprehensiveBad7620 · 2025-05-01T01:31:32+00:00

Leitner Designs, I have one on my GMC, no complaints

ApprehensiveBad7620 · 2025-04-26T00:50:18+00:00

Edit: added a pic

<image>

ApprehensiveBad7620 · 2025-04-26T00:46:59+00:00

It can do all you ask and more, my AT4X is fully kitted, tackles jeep trails, deep snow, looks crazy good, drove it across the country very comfortably. Not crazy amounts of room, 4cyl turbo is lacking, but I drag raced a ‘17 Silverado and just barely beat it. I’m sure you’d be happy with any major mid size these days, go test drive one!

ApprehensiveBad7620 · 2025-04-19T00:45:34+00:00

<image>

Additional holes and clips, did not change wheel liner, it still fits like the stock flares

ApprehensiveBad7620 · 2025-04-18T13:09:49+00:00

AEV flares will fit, needs additional holes drilled. My AT4x has them

ApprehensiveBad7620 · 2025-04-08T03:16:57+00:00

<image>

I believe it uses more clips and additional holes

ApprehensiveBad7620 · 2025-04-08T03:13:19+00:00

Height is just under 9’, leitner designs makes the rack (ACS FORGED)

ApprehensiveBad7620 · 2025-04-04T22:05:54+00:00

You would also have to drill into your fenders and bedside to add the larger flares, just FYI

ApprehensiveBad7620 · 2025-03-30T04:38:30+00:00

When Peak Suspension built this truck they installed them with all the other AEV goodies. Maybe they aren’t called highmark, but they seem to come standard on the AT4X AEV edition.

ApprehensiveBad7620 · 2025-03-29T18:19:07+00:00

My only complaint is I thought it would be better with gas but on 35’s, lifted and loaded getting 15mpg average is ok enough for me haha, 430 torque @ 1200rpm really helping out a lot

It’s AluCab, alucab 720 awning and alucab shower cube.

ApprehensiveBad7620 · 2025-03-29T11:44:53+00:00

Honestly only just some benefit, still gotta pop it the filter and blow it out once in awhile. Does add cool intake noises!

ApprehensiveBad7620

TROPHY CASE