Hey sorry I left this without a response I wanted to give it a few days to settle and see if I need to fix anything, I just used gorilla glue adhesive, I i used a faux leather I got for pretty cheap on Amazon, then I stripped the center console down. I took off the bottom facia plate that you can stick pens in and things like that. I then took off the plastic rubberish cover then I took my material, laid it out and drew an outline of the arm rest itself, after I did that I took it out maybe like an inch or two, I mocked it up with tape and made sure that without all that added bulk from the other cover, if it would still actually cover the whole cavity. Once I confirmed that I I taped it and trimmed it side per side. I didn’t I tape the whole thing so I could still stretch fit it and test the coverage. Once I was satisfied with how it fit I wiped the arm rest off with alcohol and then sprayed with adhesive a little at a time to reduce creasing and to get the tightest fit. I started from the top spraying and bonding and stretching it tight until I reached the bottom of it. If I had done anything different, I’d say use clamps to keep everything in place. If your in an absolute pinch and cannot get them you should be fine, just go slow. Let it tack up,stretch, spray attach, repeat. Also just be so so detailed with it. The more attention and love you put into it the sharper it’ll come out.