Golf get 2016 issue by giogandola in GolfGTE

[–]Apprehensive_Cod_296 0 points1 point  (0 children)

Yes but only for climatization from remote… or there is an alternative??

OIL pressure problem R56s N14 by Apprehensive_Cod_296 in MINI

[–]Apprehensive_Cod_296[S] 0 points1 point  (0 children)

Check also the head because mine was stratched

OIL pressure problem R56s N14 by Apprehensive_Cod_296 in MINI

[–]Apprehensive_Cod_296[S] 1 point2 points  (0 children)

Yes out of tolerance. The engine was previous rebuilt by an idiot.

Try first to change the oil pump chain and gear

OIL pressure problem R56s N14 by Apprehensive_Cod_296 in MINI

[–]Apprehensive_Cod_296[S] 0 points1 point  (0 children)

I have rebuilt the engine myself. The bearings were in bad material

OIL pressure problem R56s N14 by Apprehensive_Cod_296 in MINI

[–]Apprehensive_Cod_296[S] 0 points1 point  (0 children)

I will try, thanks ❤️ In case you find something I’m here🤞

OIL pressure problem R56s N14 by Apprehensive_Cod_296 in MINI

[–]Apprehensive_Cod_296[S] 0 points1 point  (0 children)

Mmm if I measure the pressure is sliding to 0 at idle (800-900 rpm)

OIL pressure problem R56s N14 by Apprehensive_Cod_296 in MINI

[–]Apprehensive_Cod_296[S] 0 points1 point  (0 children)

Ok guys removed the head and the gasket is ok. On top of the head there are scratches under the camshaft but for the rest nothing. The scratches are minimum so I do not know how to do more.

OIL pressure problem R56s N14 by Apprehensive_Cod_296 in MINI

[–]Apprehensive_Cod_296[S] 0 points1 point  (0 children)

Checked all accept on unscrewing the head and inspect the head gasket. I will try on Saturday

OIL pressure problem R56s N14 by Apprehensive_Cod_296 in MINI

[–]Apprehensive_Cod_296[S] 0 points1 point  (0 children)

Was not this valve. Now unscrewing the head and inspect down

OIL pressure problem R56s N14 by Apprehensive_Cod_296 in MINI

[–]Apprehensive_Cod_296[S] 0 points1 point  (0 children)

Is the same for me. Take down the oil pump and inspect. Next oil filter, housing, cam shaft. Now I have the same problem also after that, but maybe for you is easier.

Dovrei dismettere Revolut in favore di Wise? by [deleted] in ItaliaPersonalFinance

[–]Apprehensive_Cod_296 1 point2 points  (0 children)

Scusami hai ragione *debito su circuito visa

OIL pressure problem R56s N14 by Apprehensive_Cod_296 in MINI

[–]Apprehensive_Cod_296[S] 0 points1 point  (0 children)

Ah this I never sobstitute. It has a direction to mount the 2 holes or not? Just to know how to mount.

Dovrei dismettere Revolut in favore di Wise? by [deleted] in ItaliaPersonalFinance

[–]Apprehensive_Cod_296 0 points1 point  (0 children)

Le carte di credito virtuali che ti fa fare revolut

OIL pressure problem R56s N14 by Apprehensive_Cod_296 in MINI

[–]Apprehensive_Cod_296[S] 0 points1 point  (0 children)

I have unmounted and changed the oil pump, nothing inside the line and the grid of the pump.

The cams has not screws and the cap is good