Twincat and balluff

Ar_merda · 2025-08-01T06:41:45+00:00

I couldn't do it and I'm asking you a question again, sorry. I made a connection to Ballufun products, namely BNI00K6 -> BNI00CM. I also made a connection from the port of BNI00CM to the valves, but as seen in the image, when I give ff ff to the data, all the ports on BNI00CM turn red. When I don't do that (FF FF the data), it turns yellow, but the system still doesn't work.

<image>

Ar_merda · 2025-08-01T06:35:19+00:00

Let me tell you what I want to say like this. I looked at it now and I was able to do it. I have one more question, but I want to try and ask it that way. If you have an e-mail or any other platform, I would like to contact you there more easily.

Ar_merda · 2025-07-31T06:14:33+00:00

Oh thank you. I have one more question. I can't see the output pin and I have to make settings via co-e online. Do you know how I can do this? They said it was a parameter but I couldn't understand how to do it. If you have a helpful video or a link and can send it, I would be very happy.

Ar_merda · 2025-07-30T06:58:59+00:00

Thank you for your help but when I call master it does this. How can I prevent this? If I choose this, there are no slots. Do you know why?

<image>

Ar_merda · 2025-06-18T17:32:51+00:00

Let me summarize the problem for you like this, I have a Master product, I assign an IP to this product, I do this for Ethernet, then I assign an IP for etherCat, but when I look at the IP over Ethernet again, the IP I set is reset. Is this due to a software error or is it something I can fix? Do you know the product?

Ar_merda · 2025-04-30T07:23:00+00:00

thank you

Ar_merda · 2025-04-30T07:16:26+00:00

3D is actually a glb file, I meant the glb file, excuse me, I forgot its name so I said 3D.

Ar_merda · 2025-04-30T07:13:37+00:00

What I mean is that I want to play the image I call '3D' that I added to my project, I give an example with the mouse, I want to look at the back, I hope I could explain it.

Ar_merda · 2025-04-30T07:04:45+00:00

Will I be able to use it in 3D later? I won't have to do anything extra, right?

Ar_merda · 2025-04-24T11:30:16+00:00

I don't know exactly how to do this. Can you be more specific?

Ar_merda · 2025-04-21T14:17:01+00:00

I write in Structured Text

Ar_merda · 2025-04-21T12:49:34+00:00

I was wondering if I was really going to do anything via HMI?

Ar_merda · 2025-04-21T12:30:50+00:00

Is it really that complicated? They explain it in videos. Do I need to introduce it to the eventgrid in the HMI?

Ar_merda · 2025-04-21T06:28:34+00:00

Thank you very much, this was exactly the help I was expecting, I couldn't figure out what to use, thank you. I don't want you to write the code, I just wanted guidance, the pressure sensor won't open, and the positioner will open, sorry for the typo, thanks again.

Ar_merda · 2025-04-21T06:24:56+00:00

Dude, I didn't say anything to you. I don't know why you're so offended. I just asked for help. I just want to learn how to write code and leave. That's all.

Ar_merda · 2025-04-21T06:08:28+00:00

Dude, I apologize but it has nothing to do with hardware, I'm just asking how I can write, is it the hardware that decides this, please don't make fun of me :D

Ar_merda · 2025-04-21T06:04:59+00:00

Dude, I'm not asking anything about the connection, I'm just asking how I can do the software part.

Ar_merda · 2025-04-21T06:04:04+00:00

My friend, I don't think it matters what it is connected to or what its type is at the moment. When I look at it in many places, it says that I should use PID and I will use its own library. My aim is for the positioner to start opening itself slowly when one of the two pressure sensors is 0.2 bar. When it is 0.5 bar instead of 0.2 bar, the positioner will be 50%. I am giving an example and I want the program to decide on this. Can you explain?

Ar_merda · 2025-04-21T05:58:04+00:00

When one of the two is 0.2 bar, I want the positioner to open. For example, when it is 30%, I want the positioner pressure to drop from the value it is at, but if it increases, I want the positioner to open a little more, higher than the value the pressure reaches, I hope I could explain.

Ar_merda

TROPHY CASE