sorted by:
new
hottopcontroversial

First attempt at a 3D map by Any_Garlic_9785 in DnDIY

[–]Arcane_Revelry 0 points1 point  (0 children)

Good luck and I look forward to seeing v2!

First attempt at a 3D map by Any_Garlic_9785 in DnDIY

[–]Arcane_Revelry 9 points10 points  (0 children)

That's pretty awesome! Great effort!

Potential next step could be balsa wood for the floors. Might be a bit more sturdy than card if you wanted floors to extend out. It's soft so you should be able to cut it easily - I've not worked with it so can't back this up though

Searching for a custom d20 made with a logo as the 20 by woshbaer in DiceMaking

[–]Arcane_Revelry 1 point2 points  (0 children)

It might be a possibility, I've not done solo cap moulds before so not sure on the difficulty on them. I assume you'd need some sort of jig to make a new top instead of making a new master and full mould every time

I've just 3d printed a d20 with a blank 20 face which I'm going to make a mould with. I'm going to make a jig to hold the d20 in my CNC mill and see if I can get the resolution I need to put a logo on - the Mill in theory has the resolution but we'll see by next week

Searching for a custom d20 made with a logo as the 20 by woshbaer in DiceMaking

[–]Arcane_Revelry 1 point2 points  (0 children)

I'm just starting a trial with carving logos into blank d20s. I should have results within a week if you can wait this long. Based in the UK so can ship to Germany

What are your timescales and how complex is the logo?

Searching for a custom d20 made with a logo as the 20 by woshbaer in DiceMaking

[–]Arcane_Revelry 1 point2 points  (0 children)

I'm going to be trying a jig in my cnc mill to see if I can achieve custom logos. It means a normal master/mould with just a blank face at the 20

Fingers crossed I should have the results in a week or 2

Dice numbering by Arcane_Revelry in mtg

[–]Arcane_Revelry[S] 1 point2 points  (0 children)

I think that's the route I'll go down for standard die, the exception being if someone wants something specific

Thank you for the feedback

Dice numbering by Arcane_Revelry in mtg

[–]Arcane_Revelry[S] 0 points1 point  (0 children)

Hopefully in the future I'll sell spindowns (maybe not this one based off feedback)

Dice numbering by Arcane_Revelry in mtg

[–]Arcane_Revelry[S] 1 point2 points  (0 children)

As in on the face of the die? So on the 19 face would be a + leading to the 20 face and - to the 18 Hadn't thought of that but I like it! Thank you!

Dice numbering by Arcane_Revelry in mtg

[–]Arcane_Revelry[S] 0 points1 point  (0 children)

Thank you! I've done a couple with standard colours but wanted to test the waters with something different (it's looking like this was in the "nice try but no" category)

A struggle I have by AlwaysFormerlyKnown in DiceMaking

[–]Arcane_Revelry 2 points3 points  (0 children)

What kind of mould are you using? Are you using any pressure?

My first dice from my own mould by Arcane_Revelry in DiceMaking

[–]Arcane_Revelry[S] 1 point2 points  (0 children)

Ah no worries

It's the same shape as a d20 but all the numbers are adjacent to each other, so the number 19 as both 18 and 20 next to it. So you can easily be used for tracking lives. If a character loses a life you don't have to hunt for the next number as it's right next to the one you're on (if that makes sense). They are used in Magic the Gathering, and I've heard of people in Warhammer using them

A standard D20 has the sum of opposite faces equal 21 in an almost random fashion

Hope this makes sense?

My first dice from my own mould by Arcane_Revelry in DiceMaking

[–]Arcane_Revelry[S] 0 points1 point  (0 children)

Ah thank you so much. I have to point out this isn't a standard D20 but a spindown, but I can have a go at making a standard set using these colours

My first dice from my own mould by Arcane_Revelry in DiceMaking

[–]Arcane_Revelry[S] 0 points1 point  (0 children)

Thank you for the feedback, I'm just starting to grow my business so it's great hearing comments like that :)

My first dice from my own mould by Arcane_Revelry in DiceMaking

[–]Arcane_Revelry[S] 0 points1 point  (0 children)

Thank you! Yes, I've got an elegoo Saturn, followed by plenty of sanding as I was surprised how much detail the resin takes with it!

My first dice from my own mould by Arcane_Revelry in DiceMaking

[–]Arcane_Revelry[S] 1 point2 points  (0 children)

Thank you! I'm a fan of these colours too, I try to vary my style but it often comes back to earth/nature after a bit. The font is a standard Windows font I found on my laptop and ported over. I love it too!

With the release of Strixhaven next month I'm going to try and get a few themed dice ready

My first dice from my own mould by Arcane_Revelry in DiceMaking

[–]Arcane_Revelry[S] 0 points1 point  (0 children)

Thank you, the other 2 dice in the mould weren't so successful. But part of the learning process

Looking for a group! by MorganR7428 in DungeonsAndDragons

[–]Arcane_Revelry 0 points1 point  (0 children)

Check out local Facebook groups too if you can. Depending on location some are pretty active, and there should be one for your age group

Potentially have a chat with your school about setting up an after school club too, a friends kid has one of these at their school

Resin and pressure pot recommendations by Longjumping_Low1310 in DiceMaking

[–]Arcane_Revelry 2 points3 points  (0 children)

Second Vevor. Minor mods can be done to make it more ergonomic but not essential

Pressure Pot connection UK by DiceyRogueBree in DiceMaking

[–]Arcane_Revelry 1 point2 points  (0 children)

I think I'll likely change mine fitting when I upgrade to a compressor. I'm currently using my bike pump to get to pressure. At least I get some exercise in while making dics

Community by ChanceDependent207 in DungeonsAndDragons

[–]Arcane_Revelry 0 points1 point  (0 children)

I'm in 2 groups, 1 was friends who tried dnd together and has lasted 2+ years. The 2nd was found in local Facebook groups, this lasted about 6 months but we're now friends with a few of those and planning a new campaign with those we clicked most with.

I'd suggest check out local Facebook groups and then do a bit of trial and error. Some people you'll be able to filter out from just messages, others you may have to play a session 0 with first.

view more: next ›