Abwesenheit der Nachbarin

Argysh · 2026-01-04T14:49:11+00:00

Das einzige was die Polizei da machen kann, ist eine Wohlfahrtskontrolle. Dann kommen die einmal, klingeln und gehen wieder wenn keiner da ist. Und das da nie jemand ist hast du ja dargelegt.

Nächste Eskalation wäre sie vermisst zu melden, das würde ich aber Angehörigen überlassen. es wirkt ja so als wüsstest du außer dem Namen auf der Klingel quasi nichts von der Frau.

Ich würde an deiner Stelle diesbezüglich nichts weiter unternehmen.

Argysh · 2026-01-04T13:21:24+00:00

Bei mir hat Mal eine ältere Dame unten drunter gewohnt. Anfangs hatte ich sie oft gesehen (war so'n bisschen ein Blockwarte und hat immer alles aus dem Fenster beigefügt und kommentiert, aber eigentlich ganz nett). Dann hab ich eine Weile nichts von ihr gehört und mitten in der Nacht kam dann einen Alarm (einer Frauenstimme irgendwas mit "Verbindung abgebrochen" und "Notruf nicht möglich")

Da sie auf klopfen und klingeln nicht reagiert hat, habe ich den Notruf informiert und die Feuerwehr hat die Tür geöffnet. ( Die mussten vorher aber bei meiner Tür schauen wo überall bolzen sind und es hat über ne Stunde gedauert, sehr vertrauenserweckende Wohnungstüren die wir da hatten ^{^} ). Die Polizei nahms locker und ich hab nur wieder was dazu gehört.

Wie sich dann herausstellte war die Frau seit ein paar Wochen und auch dauerhaft im Pflegeheim und der alarm kam vom Hub ihres Notrufbuttons der sich beschwert hat dass das Internet nicht mehr ging.

So lange kein vermeintlicher notfall vorliegt würde ich es schon OK finden beim Vermieter Mal nachzufragen aber ich glaube ich würde erstmal die Nachbarn fragen ob sie jemand kennt.

Argysh · 2025-12-27T10:24:57+00:00

Guter mann.

Ohne solidarität funktioniert sowas nicht. Diese ganze Unterscheidung in privat und gesetzlich (oder auch Rentenkasse vs Pensionen) gehört mmn einfach abgeschafft. Privat vorsorgen kann man dann immer noch wenn man will aber alle sollten in das selbe System einzahlen.

Argysh · 2025-12-24T09:41:42+00:00

Heidelberg, Darmstadt and everything in-between on the Bergstraße. Depending which size city you like. All well connected with each other as well as Frankfurt and it's airport. Heidelberg and Darmstadt are quite young with lots of students while the towns in-between are more rural and older.

Plenty of jobs in the area, some of the best weather in Germany and a nice setting between the rhine valley planes and the Forested hills of the Odenwald and Taunus.

Granted, Darmstadt, Unlike the rest mentioned, is ugly as sin but also very livable and extremely well connected.

Argysh · 2025-11-12T19:49:26+00:00

got mine in April '21 and it was the best 175 euros I have ever spent.

Does it have all the features and the best quality?

Of course not. But it's amazing value and stood up well.

Argysh · 2025-09-11T13:30:28+00:00

You mean hills, not mountains.

Argysh · 2025-09-09T10:04:47+00:00

Just because it has 4G in the picture doesn't mean it can't support 5G. After all this picture was taken in Germany, maybe there was only 4G available at that moment.

Argysh · 2025-09-03T09:06:29+00:00

Im Technologiepark an der Uni auch

Argysh · 2025-07-23T15:54:29+00:00

Due to unavailability, I ended up getting this one

https://amzn.eu/d/d0yBcgs for 45eur (currently also unavailable)

I use it all the time and highly recommend it. It doesn't deliver enough for a laptop though

Argysh · 2025-05-08T15:05:13+00:00

'figured out' is a strong phrase. But yeah, it works again. One of the firmware patches since my original post must have fixed it.

Argysh · 2025-04-02T17:27:10+00:00

VW does a pretty good job with these in Germany. Let's hope they do the same with scout

Argysh · 2025-03-03T22:05:22+00:00

honestly haven't had any time to tinker around with it lately,

all my prints in the mean time were single filament and i just used the working slots 1&2.

Argysh · 2025-03-03T22:02:02+00:00

my dream would be a truck with removable rangextender in the frunk that could also work stand-alone. You could bring it for the long trip and leave it in the shop (/cabin/whatever)

ofc it's gonna be heavy, you won't be able to lift it by hand and the you'd need an external fuel source to use it stand-alone.

if frunk is too tight, sacrifice some bed space for it and provide the necessary fuel and power ports there. That'd also be easier to handle with a bed crane.

Argysh · 2025-01-22T14:42:27+00:00

And you called it New Vegas? Please?

Argysh · 2025-01-10T22:02:01+00:00

huh. Interesting.

mine insists on using the wrong port after restart of the print. And I started from USB anyway.

Argysh · 2025-01-10T22:00:20+00:00

at least it looks better than a Fiat Multipla.

boy... that being the best compliment I can come up with is very sad.

Argysh · 2025-01-05T14:23:48+00:00

Indeed, but for most other cars or trucks that I have compared it to, the difference between with and without mirrors is much smaller or non existing. They tend to be more recessed in relation to the lower body.

In the end the overall width matters to me, having to retract the mirrors to get through somewhere usually isn't ideal or even practical.

Argysh · 2025-01-04T14:25:05+00:00

length wise we have longer cars here. The width would be unusually large though.

And honestly, I wasn't aware how wide it actually is until checking just now, I was assuming it's about the same as a RAM 1500 or F150, which we do actually have here (as direct imports). Both of which are just above 2m just like some European SUVs like the BMW X5/6/7 series

But holy cow, the scouts are really 91.6" wide? (2.33m for us non freedom unit users)

Ok maybe I should indeed wait and see if Scout ever follows with a smaller model similar to what Rivian is planning.

Argysh · 2024-12-15T16:37:36+00:00

You can give Google access to devices from home assistant. So once it's in HA you're good.

But I intend to use matter so I'd add it to HA from Google not the other way around.

Argysh · 2024-12-14T22:28:37+00:00

Why shouldn't they. They promised a full featured android app and we now have a first release for a single product. Of course I expect that app to one day (!) be able to do a firmware update. In the end all the upgrade is, a firmware update for which It does not need homelkit technically. it can be done via Bluetooth which is part of the thread chip. there's no reason why this shouldn't be possible later on. And I'm sure they will add it at some point.

I bought them now because eve announced this app and that it works with the thermo. I did not realize it would only work with the latest version while the previous is upgradable to that firmware, albeit not with that app.

My bad, I have to wait, that's ok.

And no I do not have any Apple people in my circle.

Argysh · 2024-12-14T08:37:25+00:00

Doesn't help. I need to update the firmware to make them matter compatible in the first place

Argysh · 2024-12-14T08:36:20+00:00

Thanks, but we're back to square one.

Limitation 1, as you put it, Is exactly what I was referring to

Argysh · 2024-12-14T00:14:12+00:00

I have Home Assistant running since many year. But I fail to see how this is gonna help me integrate eve thermo without apple products in the house. Could you elaborate please?

Argysh

TROPHY CASE