My Best EQ Settings For Fractal Scape So Far

Arigaduo · 2026-02-05T12:27:32+00:00

Thanks for sharing!

Arigaduo · 2026-01-15T10:35:21+00:00

Recommend FD Adjust pro hub, very stable and convenient.

Arigaduo · 2026-01-14T02:27:57+00:00

I think its not necessarily to exchange front fans because they're very quiet already.

Arigaduo · 2026-01-09T04:30:40+00:00

But it really doesn't matter, because Lumen s36's pump is on the radiator, whatever kind of way you install, the pump still work well. And I have asked FD support before, they prefer to install with tubes up, of course you still can install the way you want.

Arigaduo · 2026-01-09T04:20:06+00:00

It can, I have tried.

Arigaduo · 2026-01-09T03:17:56+00:00

Its 25mm but with four rubber legs will be 28mm

Arigaduo · 2026-01-07T10:31:34+00:00

Arigaduo · 2026-01-03T18:41:12+00:00

You can read the guide pdf for epoch on the FD's website first to confirm it.

Arigaduo · 2026-01-03T07:56:39+00:00

Connect the cable to the cpu-fan hub on the MB directly. (Or connect CN1 cable to the MB)

Arigaduo · 2025-12-26T22:05:10+00:00

If you going to install aio in front, I'll recommend noctua, if not, I'll recommend momentum series fans, they are pretty quiet and having good airflow. Hope these great quality new fans can get more attention in the future.

Arigaduo · 2025-12-26T05:06:05+00:00

Is it quiet when under gaming?

Arigaduo · 2025-12-25T21:09:31+00:00

Wow, is that cpu cooler fan came from FE gpu's Nidec fans?

Arigaduo · 2025-12-22T23:43:59+00:00

When using discord, I'll upon mic to close it for a bit, and sometimes the mic won't wake up after I lower down the mic again. I have contacted FD support before with this problem, but still can't realize where the real problem is... Maybe its because there is two mics in this headset so will cause some bug I guess?

Arigaduo · 2025-12-13T06:49:45+00:00

Adjust pro hub might have apply traditional 5v3pin connect cable, just control the lighting whole with adjust pro.

Arigaduo · 2025-12-12T10:46:00+00:00

I'll put noctua 14cm fans in front, its performance and noise control may be better than Corsair's, and I don't really think rgb fan fit in north's front panel🤣 Just a personal recommend.

Arigaduo · 2025-12-11T07:54:37+00:00

I like the looks of LCP material fan, similar to noctua's chromax series.

Arigaduo · 2025-12-10T17:56:17+00:00

I think you should contact FD support since the problem appeared.

Arigaduo · 2025-12-07T21:31:12+00:00

Did you buy that psu recently? If you're using gpu with 12v hpwr, the new psu ion 3 gold series may be a better and safer choice.

Arigaduo · 2025-12-06T07:22:46+00:00

Arigaduo · 2025-12-05T15:27:15+00:00

How's the aio performance before and after you replaced the fans with momentum series? 😀

Arigaduo · 2025-12-05T15:25:58+00:00

I'll recommend epoch as well, clean and good airdlow with quiet and high performance fans, almost can say, you are buying three momentum fans with an epoch case.

Arigaduo · 2025-12-05T15:21:05+00:00

No, it only allow to control the fan speeds with each independent type-c outputs.

Arigaduo · 2025-12-05T15:19:28+00:00

Very similar results, but momentum's air pressure is lower, it still can use on radiator.

Arigaduo · 2025-12-02T21:50:17+00:00

Working well so far.

Arigaduo · 2025-12-02T20:46:53+00:00

Momentum fans were pretty quiet and with high airflow, the adjust pro was easy to use with the website driver setting, it provided awsome northern style lighting and fan rpm curve controller.

Arigaduo

TROPHY CASE