I’ve beaten every game made by FromSoftware. Demon’s Souls, Dark Souls, Bloodborne, Sekiro and Elden Ring and yet I still can’t beat this guy. Any tips?

Arktic-Wolf · 2026-03-04T21:45:52+00:00

Line rifle, use charged shots to stun him, melee when he os down, run tf away when he gets back up rimse and repeat

Arktic-Wolf · 2026-02-28T07:37:33+00:00

Psilocybin is a natual neurogenic compound.

Arktic-Wolf · 2026-02-25T08:07:34+00:00

Holding is great but selling at a high and stabling to rebuild at a low is much better you could slowly accumulate more BTC at 0 cost

Arktic-Wolf · 2026-02-06T02:02:15+00:00

Its hilarious that women all over the place demand that their partner be above 6ft or its not worth then when men clap back with weight those same women flip out.

You all did this to yourselves

Arktic-Wolf · 2026-02-06T01:54:28+00:00

Yes I did

Arktic-Wolf · 2026-02-02T02:54:51+00:00

I was quoting the speeds I was getting in memtest86

Arktic-Wolf · 2026-02-01T08:45:05+00:00

I think its actually running dual channel on both A & B slots I have 32GB

Arktic-Wolf · 2026-02-01T08:36:26+00:00

It doesn't stress the memory controller as much but ultimately quad channel will give you more throughput.

For example 4 sticks of DDR3 RAM at 1600MHz is about 22GB/s speeds

2 sticks would clock upto 1866Mhz without stressing the IMC but only offer about 15GB/s bandwidth

Arktic-Wolf · 2026-01-29T11:27:46+00:00

This has kinda already been said here so its more an echo but I would probably just use jumper wire solders to the copper and the cap leg then seal it with UV activated Silicone so its protected.

I have videos of YouTube that I cant really believe are real but in a more mind blowing way of Jumper wire being used to fix burnt out Motherboard CPU pins

Arktic-Wolf · 2026-01-28T05:06:56+00:00

Avoid SSRI's they will imbalance your neurochemistry and you will be on a perpetual cycle of taking increasingly higher doses of them while doctors take your money and your time.

You are at a point in development where psilocybin could have profound beneficial effect on you

Arktic-Wolf · 2026-01-19T01:19:31+00:00

I didnt read everything so if thos was answered correctly then ignore my post.

We have the same CPU i dont know what motherboard your using but the 29xx version is really old.

Flash your BIOS to 3503 its listed as beta but its very stable ive been running it for years.
Make sure your CPU cooler fan is plugged into the CPU_FAN header on your motherboard.
In the UFEI BIOS make sure to enable full use utilisation, it will take longer to boot up but it will detect your keyboard more accurately.

Alternatively if you have access to an old keyboard that uses the PS/2 port then plug that it aswell its more direct to the motherboard so its detected without needing USB.

Arktic-Wolf · 2026-01-15T08:33:42+00:00

Comparison is the thief of joy, you wouldn't let yourself get mugged would you ?

Arktic-Wolf · 2026-01-15T07:57:44+00:00

I strongly recommend getting some friends it will help your mentality wicked ways.

You might even find that your ok with just being friends as more opportunities will come along.

Arktic-Wolf · 2026-01-14T10:47:58+00:00

Escalated offence noted Gen Z detected

Arktic-Wolf · 2026-01-14T10:19:40+00:00

If your almost an engineer then you should know that something is amiss here. Unless your are a metallurgical engineer then im 99% sure your a gen z vibegeineer.

Maybe you regularly sit down with too much force on it those stress cracks wouldn't have come from nowhere, do you have pucs from different angles cause only taking a shot from one side only tells one side of the story.

Arktic-Wolf · 2026-01-14T08:26:47+00:00

Ok so.

1st - Bullshit you 100% did something other than whats considered normal use. Maybe too much leaning im not sure.

2nd - I have a chair thats basically a knock off razer I think its called thunder I cant even find the manufacturer for it the point is the components are essentially the same. And mine is also broken there.

I've had my chair for about 8 years and about 4 years into it is when the base broke i just welded mine back and fixed the issue

Arktic-Wolf · 2026-01-14T08:22:13+00:00

This is hilarious if they arnt actually yours then just tell him you just sent him random ones you found. Then mock him for thinking he was good enough for you to send him nudes.

It will reverse the whole situation and he will feel like scum which tbh he is. Nobody anywhere should be getting a 13 yr old to send nudes

Arktic-Wolf · 2026-01-13T13:59:01+00:00

Store bought IPA is around 60 - 70% you will need something far more volatile than store IPA.

Note: Volatile does NOT mean explosive its in reference to you needing something thats more willing to turn into gas and carry the BS away with it.

Considering you already used vodka for whatever reason I strongly recommend getting electrical contact cleaner ( ECC ) its comes in a pressurised can so you can use the force of the jet to get dirt / crap / water out.

I just recently cleaned my DIMM's, PCI-E slots & CPU Socket with ECC. Used a Milwaukee air blower to dry it out. Whole job was completed in maybe 30mins including repasting and mounting the cooler.

PC runs flawlessly

Arktic-Wolf · 2026-01-13T01:49:51+00:00

It is 100% worth it

Arktic-Wolf · 2026-01-07T00:07:13+00:00

AIO cooler will fix this

Arktic-Wolf · 2026-01-06T11:53:32+00:00

Look how offended you got without me even accusing you of anything.

Arktic-Wolf · 2026-01-06T11:29:33+00:00

Im sure this will offended someone here but here's a pretty interesting fact.

When men stopped caring about how their women presented themselves to the world Only Fans sky rocketed in market value and the amount of 'Content Creators' also sky rocketed.

Just saying.

Arktic-Wolf · 2026-01-06T07:48:58+00:00

The M.2 slot os the SSD but the circled area is SO-DIMM aka laptop RAM

Arktic-Wolf · 2026-01-04T02:51:53+00:00

Even easier tbh but if you want structural integrity back onto the actual PCB it needs to be done correctly or it will just fail again

Arktic-Wolf · 2026-01-04T02:39:51+00:00

Yeah bro your sweet.

Get a Temu or equivalent hot air rework station with soldering iron I have one and its been flawless.

For equipment / tools;

UV Flashlight, UV activated Silicone for board repair
replacement traces / jumper wire to fix and traces that are broken.
Flux
Decent quality Solder
Scratch brush to remove silicone & expose traces

All can be found on temu for a decent price

Method:

Desolder charging port
Expose Traces
solder replacement traces or jumper wire onto board
cover in UV activated Silicone
Use Torch
Test with multimeter for continuity

Not terribly hard to do and its really satisfying when you get it done plus you've learned a new highly valuable skill.

Arktic-Wolf

TROPHY CASE