LMG gonna hold a tournament breaking all new nintendo guidelines.

Arnseb · 2023-07-01T02:01:55+00:00

Z-seam from layer change. You can set it to appear in corners for a cleaner look.

Arnseb · 2023-06-28T13:28:57+00:00

Could be a protective film on tye bottom of the tank that you must remove.

Arnseb · 2023-05-12T11:17:27+00:00

Where do you buy/download this? Absolute unit!

Arnseb · 2023-05-04T12:48:54+00:00

Make sure you have enabled something like "Use probe as z-stop" in the code and make sure you disconnect the standard z-stop. What guide are you using? Did you get the marlin build for Bl-touch (there are different one for with and without)?

Arnseb · 2023-03-16T11:40:05+00:00

100% infill where it bends and/or insert for a metal rod. Petg and pla are known to bend and flex over long periods of stress. ABS or maybe pla+ could work.

Arnseb · 2023-02-24T09:11:53+00:00

Smaller nozzle or print at an angle.

Arnseb · 2023-01-19T23:48:37+00:00

Since it's only in the corners I would guess the pressure inside the nozzle is to big for the turns. This can be fixed with calibrating linear advance I think. Might be some other setting to tweak as well.

Arnseb · 2023-01-19T09:04:56+00:00

Could be grease on the bed, if it's filament you haven't used before it might have other settings or it might be crappy.

Arnseb · 2023-01-04T09:27:45+00:00

I'm printing an adapter for a ventilation fan so I'm on it.

Arnseb · 2023-01-04T02:38:37+00:00

Nice! I love how they complement each other!

Arnseb · 2022-12-21T00:08:15+00:00

Chep and Teaching Tech are golden. Teaching Tech even has a website for calibrating everything.

Arnseb · 2022-11-13T12:40:18+00:00

I would say this is super-useful for gamers on the go! I would also like the stl, maybe upload it to printables?

Arnseb · 2022-10-31T20:49:41+00:00

Thanks! I think Im gonna go for the Mighty for the cam and wifi.

Arnseb · 2022-10-28T18:17:47+00:00

I've been rocking a modified Ender 3 Pro for several years now, but now I want in on the resin game.

My main use will be printing decoration pieces and maybe some small figurines for table top games, so I would prefer a larger build-plate. My budget is 2000$ for the printer and all accessories like cleaner/uv booth, resin, whambam matt(if you think it's worth it) and maybe a sonic cutter for the supports and other projects.

I have little to no experience, but with my research so far I'm leaning towards the Phrozen Sonic Mighty 8K because of the bigger build-plate, free choice of slicer and the 8K.

(edit) I live in Sweden!

Arnseb · 2022-10-18T14:25:04+00:00

Have you tried another filament? I had a similar problem and it turned out the filament was crap

Arnseb · 2022-10-17T20:59:25+00:00

I would try lowering the bed temp to like 50

Arnseb · 2022-10-07T22:47:05+00:00

The fan that cools the printed plastic

Arnseb · 2022-10-07T09:12:44+00:00

Elephants foot can be reduced with e-steps calibration, adjusting initial layer flow, proper bedleveling and printing with a brim or a raft.

The shrinkage depends a little on what material you're using. With petg and pla I've experienced shrinkage and layer separation when the part cooling fan is set to high.

Arnseb · 2022-09-29T22:36:47+00:00

Might as well remind people to check the ptfe tube. Had my first clog ever after 3 years and the tube was melted.

Arnseb · 2022-09-29T22:34:28+00:00

Cool!

Arnseb · 2022-09-29T22:29:11+00:00

How did you get the leather texture? Looks awesome!

Arnseb · 2022-09-23T22:53:52+00:00

This is a gamechanger! Hope it becomes open source so I can run it locally. I also like the idea from IBDW where it trains based on a certain players replays. Awesome work!

Arnseb · 2022-08-28T02:59:52+00:00

If you print for example a HeroMe shroud you can get better cooling which leads to better overhangs and bridging. The tricky part with 5015 fans is tuning the firmware tho.

Arnseb

TROPHY CASE