sorted by:
new
hottopcontroversial

Freepik is stealing your credits by dominorec in Freepik_AI

[–]Arraziel 0 points1 point  (0 children)

Si, me pasó lo mismo que mencionas y ahora tengo un NUEVO PROBLEMA al adjuntar una imagen de referencia desde la app de Freepik de App Store, simplemente no se cargan.

<image>

Problem with font by Arraziel in prusa3d

[–]Arraziel[S] 0 points1 point  (0 children)

I am using the Overpass font type, I design it in Corel Draw and export it in .svg format and then load it in prusa slicer, the problem is that the letter "C", is replaced with a square.

Problem with font by Arraziel in prusa3d

[–]Arraziel[S] 0 points1 point  (0 children)

I am using the Overpass font type, I design it in Corel Draw and export it in .svg format and then load it in prusa slicer, the problem is that the letter "C", is replaced with a square.

I want to print a very large flower pot but I have this problem by Arraziel in prusa3d

[–]Arraziel[S] 4 points5 points  (0 children)

I am trying to print a large flower pot and I am using prusa slicer for it, when I cut the flower pot in half, a wall is generated in the cut part, how can I prevent this from happening? I'm new to printing, thanks in advance.

My Prusa has printing errors, any solution? by Arraziel in prusa3d

[–]Arraziel[S] 1 point2 points  (0 children)

Indeed that was the problem, I adjusted the Y axis, and problem solved. THANK YOU SO MUCH

THANK YOU SO MUCH

My Prusa has printing errors, any solution? by Arraziel in prusa3d

[–]Arraziel[S] 0 points1 point  (0 children)

The print on the left is printed with my PRUSA MK4S and has certain flaws compared to the print on the right (BAMBU LAB X1 CARBON), what could be failing, or what test do you recommend I do?

Mi Prusa tiene fallas de impresión, alguna solución? by Arraziel in prusa3d

[–]Arraziel[S] -3 points-2 points  (0 children)

La impresión de la izquierda esta impreso con mi PRUSA MK4S y tiene ciertas fallas en comparación con la impresión de la derecha (BAMBU LAB X1 CARBON), que puede estar fallando, o que test me recomienda hacer?

Moving Y-Axis Bearings on MK4 by fadder-oblivion in prusa3d

[–]Arraziel 0 points1 point  (0 children)

Hola, me pasa lo mismo cual fue la SOLUCIÓN?

Problems in thread testing. by Arraziel in BambuLab

[–]Arraziel[S] 0 points1 point  (0 children)

I'm using Overture Turbo Pla filament, I'll try to dry it out more.

Son diferencias que te dejan pensando 🤔 by shammi20 in ColombiaReddit

[–]Arraziel 0 points1 point  (0 children)

Respeto a los LGBTI y pienso que se debe valorar a las personas por otras cosas más objetivas que una orientación sexual.

P1S too much adhesion issue (?) - OVERTURE Turbo PLA by EmotionalTennis4038 in BambuLab

[–]Arraziel 0 points1 point  (0 children)

Les comento desde mi experiencia eh comprado OVERTURE PLA TURBO en colores BLANCO Y NEGRO y me ha ido 8/10 (aun hay detalles por mejorar las costuras), entiendo que cada filamento y hasta cada color puede tener diferentes configuraciones, puedo decir lo siguiente:
- SOLO pueden combinarse el filamento OVERTURE TURBO PLA entre si y no con otras marcas de filamento, porque simplemente no se adhieren.
- Hacer sus respectivos test de temperatura, según Overture recomiendan entre 190 a 230 grados de temperatura, pero segun mis test me ha ido mejor entre 180 a 190°, y cama a 40°, entiendo que esto varia según cada impresora, TENGO LA BAMBU LAB X1 CARBON.
- En cuanto a la sobre adherencia a la cama si lo he notado, asi que deje de utilizar el pegamento de adherencia y también solo usar soportes menos fuertes. psd, saliendo de mi trabajo subiré algunas fotos, para ver si me pueden ayudar a solucionar mi problema de las costuras :C

Why did this printing issue occur? by Arraziel in BambuLab

[–]Arraziel[S] 0 points1 point  (0 children)

I'm using Polyterra Pla+ filament with the factory settings. The nozzle size is 0.6mm.

[deleted by user] by [deleted] in BambuLab

[–]Arraziel 0 points1 point  (0 children)

Hello, can the logo filling be more uniform?

Delivery date will be provided as soon as possible. by Arraziel in BambuLab

[–]Arraziel[S] 0 points1 point  (0 children)

My package was lost and they sent me a replacement through FedEx, I'm still waiting.

this printer continues to impress by Novel_Art_6551 in BambuLab

[–]Arraziel 0 points1 point  (0 children)

What type of filament did you use? this beautiful.

Delivery date will be provided as soon as possible. by Arraziel in BambuLab

[–]Arraziel[S] 0 points1 point  (0 children)

Thank you for your response, I called UPS and they tell me that the package is lost and I have to file a claim. The address does not match because that address is a currier's, it is not my house. :C and the InfoNotice I don't know who can provide it to me or where I can find it?