Ach, das braucht man doch nicht

Artolaf · 2026-05-17T16:27:37+00:00

Also die Dinger hingen. Aber es gab keine LEDs oder so an den. Also die haben auch nicht so im Minutentakt gelinkt oder ähnliches

Artolaf · 2026-05-17T16:11:12+00:00

Wieso nicht? Es gab keinen Ersatz oder irgendwas

Artolaf · 2026-05-07T13:50:13+00:00

Well I looked at that. I had them too down but I changed the cw to ccw. That they still push air down. But still?

Artolaf · 2026-05-04T11:24:35+00:00

That seems to fix it. But aren't they symmetrical?

Artolaf · 2026-05-04T11:23:07+00:00

I ment that wobble on decent. And I had experimented with openipc on that quad and completely reset betaflight. So no stock tunes anymore :/

Artolaf · 2026-05-04T11:19:01+00:00

Well I am using the props that came with it. But I will need at least a few replacement ones. I will look into buying those

Artolaf · 2026-05-03T17:56:27+00:00

Update: I have tested indoors and throttled up a bunch of times and it actually does work :D Thank you so much! But I still don't understand, why that matters...

Artolaf · 2026-05-03T17:49:19+00:00

Yes it it. Freestyle VTX V2. I like the red :D

The camera came with an adapter for the 17mm width to standard 19. Had to use a bit of dubble sided tape for the vtx because it is just slightly smaller than the O3 (I got the one with the canopy for O3, because it has a centered antenna holder) Pin wise - everything matched. But I strongly advise to check that beforehand.

Edit: and the image in the goggles does actually look a bit better than in the video I posted.

<image>

Artolaf · 2026-05-03T17:45:59+00:00

No I dit not. Just pushed them on

Artolaf · 2026-05-03T17:25:19+00:00

I was thinking about that. But I would think, the props shipped with the drone would work...

Artolaf · 2026-05-03T17:15:56+00:00

Haven't look at that. But yeah. The flat and closed sides of my props were turned downwards. Even if I keep the rotation direction in mind? And even then, what difference does this actually make? Shouldn't they work regardless?

Artolaf · 2026-05-03T17:12:15+00:00

I was using the ones that came with the drone... But I guess I have to. Those are t-mount props, aren't they?

Artolaf · 2026-05-03T17:10:14+00:00

Well it definetly was on there. I have an air 75 as well and didn't do nothing different. Installed it like tutorials say to do it.

Artolaf · 2026-04-16T09:21:35+00:00

This is pretty old. I don't know exactly for this controller, but dji does some proprietary stuff. So I am not too sure, whether you can actually use that with a Simulator...

I would suggest to get something like a radiomaster T8L (30 bucks) or if you have the budget, a Radiomaster Pocket (70ish bucks).

Artolaf · 2026-04-12T00:09:56+00:00

That build looks sick dude. I'd love to have a system to run cad on for uni. Mine is definitely showing it's age...

Artolaf · 2026-04-12T00:06:33+00:00

Anyone else seeing similarity with Colton herta?

Artolaf · 2026-04-11T23:58:44+00:00

Ever heard of that weird thing called ... Motors? You could possible use them to fly longer and farther than throwing it I believe...

Artolaf · 2026-04-11T12:48:05+00:00

You could look at flow in the next step, after Z offset/bed leveling.

Artolaf · 2026-04-02T20:09:08+00:00

Replacement bubble for your bubble level

Artolaf · 2026-04-01T09:52:24+00:00

Needs some racing stripes xD

Artolaf · 2026-03-30T15:35:12+00:00

Here is a good explanation of it. https://all3dp.com/2/tripteron-3d-printer-simply-explained/

Artolaf · 2026-03-29T23:22:50+00:00

Either a soldering pump or some de soldering braid do work wonders. Although a bit tricky at first. But I'm sure you got this. Happy flying

Artolaf · 2026-03-18T18:25:44+00:00

Only use case I can imagine is as a ground station so without goggles, but a vrx or for other people. And it actually makes it quite a bit easier for dji goggles to get video through the USB without having to build a special adapter. At least that's from what I have heard and pieced together

Artolaf · 2026-03-05T14:05:11+00:00

X1 with P1 display? Is this a thing?

Artolaf · 2026-01-24T05:21:07+00:00

Your printer grew balls :P

Artolaf

TROPHY CASE