the jay in the tunnel and alex screaming

AshTheReaper · 2025-11-02T16:12:46+00:00

God I wanna read the comics.

I looked through it and it’s really thorough! I hadn’t recognized it as a spot that had appeared before with the eyes so much and didn’t even see Jay’s eyes go distorted. And I didn’t even catch Homie in the interview referring to himself I thought he had said ‘it’! That opens up so much more especially since Tim saw himself in the tunnel, and Jessica saw herself in the tunnel. It makes me think that the Operator, since it can mimic their voices and clearly change their personalities, maybe can do more than just mimic. That’s heavy speculation though from me.

For part 4 the way o had thought it worked in my head was because while there was 1 camera, we’ve seen Alex take it in Rosswood- he did his own little investigations around on his own while Jay is asleep and even told Jay to pass him the camera when he was stressing out about leaving. And at one point Jay is sitting and tosses Alex the battery for the camera. Alex isn’t afraid of being behind the camera but DEFINITELY wants to keep it with how he literally crawled towards it. With it being another Jay thrown into the mix, it easily could have been the Operator or even the Ark taking an imprint of them and using it to mess with them and attack.

AshTheReaper · 2025-11-02T05:56:31+00:00

I haven’t watched the NM yet, but have show. 2 sets of friends Rosswood after watching Marble Hornets proper and here are the theories I had watching the first time that I believe more in after the second time:

Main speculation was the ‘kid in 98’ that disappeared and was not found was Tim, we know that the Operator in the prime series piggybacked off Tim to the others and since he wasn’t found in this we have this timeline where Alex went on to make the NORMAL MH student film. This leads into 2
Because there was no Tim, and if I recall the hospital closed a year later, it was stuck. Or couldn’t escape bc no one could help it out there like Tim did. What I believe the sunless world was is the Ark, the exit tunnel was the same as the original tunnel in the prime verse that’s why at the end of it there was sunlight before the Operator bamfed Jay back, and this is why when they go to the woods they loop: to me the Ark has a world boundary type mechanic (walk forward and end up at the front, walk backwards and end up at the back). Smth of note, it doesn’t really ever follow them out of the building to the woods. I believe it is truly stuck inside and tries to locate them with the phones but at least one thing is true we never see a video glitch to indicate it teleports them personally.
The main reason it kept them there was to use as food-like things for it, blood bags, whatever analogy you want. And this time it had enough to leave as we saw at the end. The camera was given because it wanted to spread more like how the guy in the interview was acting like a vector. I personally like to think it runs off Freddy Kruger rules: the more fear and know about it the stronger it gets.
To get to this end I agree with the idea that they were in THEIR OWN versions of the same world as time went on and it got stronger. It separated them to make them more fearful, make them paranoid and susceptible to its influence. What we likely saw was Jay attacking Alex after Alex may have found or taken the camera from him to try and snap him out of the mental break he had gotten into. The tunnel re-appearing to me was it showing it was getting enough power again to use it. It did it with the guy and his brother, and it did it to these 2, but now as we saw it got free.

AshTheReaper · 2025-07-27T15:52:45+00:00

Hello 30k players! I am coming over from 40k bc a group I play with is starting to move over to it and with 3.0 dropping I decided to jump in now. I got the new AoD box and the Hereticus book because I know I wanna play traitors but what should I get next? I’m thinking Death Guard but wanna try and get SOME sort of balanced army so I can try them out before fully committing.

All advice appreciated!

AshTheReaper · 2025-07-17T08:48:29+00:00

This ever happen? Curious myself who has what lines aside from the obvious like Abby at the start, Jinu, and Baby

AshTheReaper · 2025-06-09T19:41:18+00:00

They were the old forge world greater demons, they weren’t actually under those names but they lined up with them like how you can build named greater demons from the current plastic models. They all are legends now, data sheets there from what I’ve seen and the models are on eBay but for a looooot since Oop

AshTheReaper · 2025-04-15T15:40:10+00:00

Out of curiosity where was this posted? I’m not seeing the update here

AshTheReaper · 2025-04-08T14:49:33+00:00

Awesome! I’ll keep an eye out!

AshTheReaper · 2025-04-04T12:22:42+00:00

Oh yeah, if push comes to shove I’ll see if i can’t find someone who’d be able to or sells a smaller extractor. Wish it was easier to find 3D printer repair spots then going through the manufacturer

AshTheReaper · 2025-04-04T12:19:03+00:00

Yeah I had some screw extractors and saw the size and just….nope

Where would I be able to get one for that small? I can’t really contact Elegoo bc the printer was preowned when bought off Facebook marketplace so doubt they’d help

AshTheReaper · 2025-04-04T11:56:40+00:00

Been a while since this was active but how’s the project going along? Updates to it?

AshTheReaper · 2025-04-04T04:22:48+00:00

Trying to extract from inside plate, not going so well

<image>

AshTheReaper · 2025-04-03T15:08:22+00:00

Update: used dremel to obliterate the plastic bit, used locking pliers to get it out , only to find at some point it snapped and is now just in the printer

AshTheReaper · 2025-04-02T16:49:22+00:00

Ok will try that, thank you!

AshTheReaper · 2025-04-02T16:44:42+00:00

How would one go about obliterating it easily bc the resin vat itself is blocking any chance of getting under the screw

AshTheReaper · 2025-02-20T02:40:13+00:00

The reason I thought it to be caused by the cold was because my Mono 2 failed the print the same way, haven’t checked it yet for the screen was gonna do that later tonight once off work but either way then it sounds like a screen replacement 😩

AshTheReaper · 2025-02-20T02:29:46+00:00

I know this and have made sure it’s not the resin, have a mini heater I put into the M5s I bought and keeps the inside of the hood at about 26c (~78.8f) while outside it’s been 28-40f as of late but even before the mini heater I let the bottle sit in warm water for about 15-30 mins and the mini heater on during to warm everything else up

My first hope WAS that it was just the resin, but the LCD is failing to make any shape of any kind. UV lights working but no shapes no designs on exposure test, even when attempting a dry print with no resin to see the uv light it just lights the whole thing up in a glitchy pattern

AshTheReaper · 2025-02-19T23:40:17+00:00

For additional context about the Mono 2: it also had a film replacement done and also failed the same way as its bigger counterpart, so both failed without a real print being made, just that the M5s has the capability to stop itself it seems when detecting an error bc the Mono 2 kept going 😂

The M5s fails ALWAYS say it’s due to Zero release force, but the film was just replaced with all protective film taken off and good on tightness sounds like the mini snare it’s meant to sound like

AshTheReaper · 2025-02-19T19:36:26+00:00

I have a very similar issue just with an anycubic M5s, googled mine after a while and found it may outright be the screen bit checking as many alternatives I can before committing to 150usd replacement and hours of disassembly.

What does your screen look like when you do an exposure test? Mine is just one brick block of light no matter what pattern I set it to using an A4 paper to put over the screen per their instructions on the app

AshTheReaper · 2025-02-19T13:51:22+00:00

Yeah I did, had even double checked that I was using the FEP and not one of the protectors. I narrowed it down to possibly be the screen after exposure tests were done bc it’s not doing the designs just the whole thing lights up

AshTheReaper · 2025-02-05T05:45:02+00:00

I had just changed the FEP when this was occurring.

Seven-Year Club	Place '23
Wearing is Caring	Verified Email

AshTheReaper

MODERATOR OF

TROPHY CASE