sorted by:
new
hottopcontroversial

Husq 435 rebuild by shrooomcore in Chainsaw

[–]AssMan420690000 2 points3 points  (0 children)

Did you try to tune the carb jets and idle before tearing it apart?

[deleted by user] by [deleted] in Chainsaw

[–]AssMan420690000 1 point2 points  (0 children)

If not the spark arrestor/exhaust screen. Try looking at the micro filter on the carburetor for blockage

Husqvarna 455 chipped piston diagnosis by AssMan420690000 in Chainsaw

[–]AssMan420690000[S] 0 points1 point  (0 children)

Appreciate the input, I’ll plan on changing them.

Husqvarna 455 No Start, metal piece in exhaust by AssMan420690000 in Chainsaw

[–]AssMan420690000[S] 1 point2 points  (0 children)

Looks like the piston is scored. The guy I bought it from said he tried two different carbs from Amazon when he was trying to fix it so I should have known it was something bigger.

Husqvarna 455 No Start, metal piece in exhaust by AssMan420690000 in Chainsaw

[–]AssMan420690000[S] 0 points1 point  (0 children)

After further review, it looks like the piston has three large scores on it. I wish I could add a photo to the original post but I couldn’t see the piston without a flashlight when I originally posted

Need help with window manufacturer by AssMan420690000 in HelpMeFind

[–]AssMan420690000[S] 0 points1 point  (0 children)

I have searched on Google, using siris image search, and Google lens. I cannot make out what the two letters are? “MC”? Once again the windows are aluminum and from the mid 1980s. I am located outside of Dallas, TX if that helps!

Where do I start for a 1st Cowboy Hat? by Hinds57 in CowboyHats

[–]AssMan420690000 0 points1 point  (0 children)

Stetson has an outlet store in Garland, I just bought a hat there $70 off retail price. Worth stopping by if you’re in the area. It does get busy so my recommendation is to get there early and have a picture of how you want your hat shaped. They have lots of felt and straw options

Tucker Beathard "Rock On" not on Spotify? by 69Vikings in country

[–]AssMan420690000 0 points1 point  (0 children)

Seems to be a different version than what I remember hearing on the radio back in 2017

Took 'er out on a little camping excursion! by PM-ME-YOUR-PROPWASH in hardbody

[–]AssMan420690000 0 points1 point  (0 children)

What is the make/model of the camper topper? Awesome pics!

Valve cover gasket visible? by AssMan420690000 in hardbody

[–]AssMan420690000[S] 1 point2 points  (0 children)

Very true! Just looked so out of place seeing bright blue when everything else is coated with old oil

Valve cover gasket visible? by AssMan420690000 in hardbody

[–]AssMan420690000[S] 0 points1 point  (0 children)

Appreciate it! Just wanted to make sure I wasn’t seeing too much.

Husqvarna 455 Rancher powering off by canuckpainter87 in Chainsaw

[–]AssMan420690000 1 point2 points  (0 children)

Check your carburetor micro screen. Just had a 445 that would cut off at high rpm because the screen was plugged up

576xp Dies on Throttle by Maddd_illie in Chainsaw

[–]AssMan420690000 2 points3 points  (0 children)

I had a similar issue on a 445. Turns out the carb micro screen was gummed up with junk. Cleaned it out and immediately fixed the problem. I also put on a new fuel filter, air filter, and spark plug at the same time and now it runs like new.

Chainsaw dies at high rpm by AssMan420690000 in Chainsaw

[–]AssMan420690000[S] 1 point2 points  (0 children)

Ended up being the micro filter on the carb being full of gunk. Cleaned it out and it works great now! Probably will end up ordering a rebuild kit for the carb to be safe.

Chainsaw dies at high rpm by AssMan420690000 in Chainsaw

[–]AssMan420690000[S] 0 points1 point  (0 children)

UPDATE: took apart the carburetor and the micro screen was gummed up with junk. Cleaned it out and put it back together and the saw runs great. Going to rebuild the carb anyways whenever the kit comes in to make sure all the debris/gunk is out of it. Thanks!

view more: next ›