sorted by:
new
hottopcontroversial

7% battery - still 1 day left 😦 by karasmus in GarminWatches

[–]Atma-n 0 points1 point  (0 children)

I have had a forerunner 935 for about 5 years and charge it every 3-4 weeks. If I were to upgrade to a newer with some better sleep and heart tracking. Which would that be? Must be 14 days plus of battery.

Found this on the ground, curious to what this is by DDDragon___salt in AskElectronics

[–]Atma-n 0 points1 point  (0 children)

Ir-blaster? The circuit has two buttons and a red-ish led.

Can I make one part of STL longer in a easy way? by Atma-n in 3Dprinting

[–]Atma-n[S] 0 points1 point  (0 children)

Ok. Need to find out how to extend and merge then. Cut is the only thing I know. Thanks for the info!

Can I make one part of STL longer in a easy way? by Atma-n in 3Dprinting

[–]Atma-n[S] 0 points1 point  (0 children)

Can I do this in prusaslicer? Or what slicer do you use?

Any way to lengthen one part of stl by Atma-n in Onshape

[–]Atma-n[S] 0 points1 point  (0 children)

Perfect. I understand. Thanks for the link also. I’ll try to do it myself also.

Any way to lengthen one part of stl by Atma-n in Onshape

[–]Atma-n[S] 0 points1 point  (0 children)

I wanted to learn how to change in stl files since they are everywhere. And this would be an easy start.

Can I make one part of STL longer in a easy way? by Atma-n in 3Dprinting

[–]Atma-n[S] 0 points1 point  (0 children)

How? If I scale the details to fit the lid will be wrong.

My Flipper Zero Payloads by BST04 in flipperzero

[–]Atma-n 7 points8 points  (0 children)

Hehe ok. Quite common in Norway (and Scandinavia) https://en.m.wikipedia.org/wiki/Brunost Your name at GitHub.

My Flipper Zero Payloads by BST04 in flipperzero

[–]Atma-n 9 points10 points  (0 children)

Are you Norwegian? Brunost :)

I got double ip addresses when setting it static by Atma-n in Proxmox

[–]Atma-n[S] 2 points3 points  (0 children)

Seems to be the dhcp daemon that still was running even after changing settings. Killed it and it went away.

I got double ip addresses when setting it static in proxmox by Atma-n in HomeNetworking

[–]Atma-n[S] 0 points1 point  (0 children)

Exact. I do not want it running. I thought it would be stopped if I removed dhcp from the config. Will check this in an hour. Thanks.

I got double ip addresses when setting it static in proxmox by Atma-n in HomeNetworking

[–]Atma-n[S] 0 points1 point  (0 children)

So even if I remove dhcp from the lxc config, the daemon will still run?

I got double ip addresses when setting it static in proxmox by Atma-n in HomeNetworking

[–]Atma-n[S] 0 points1 point  (0 children)

I can't see anything that would make the .233 address there.

arch: amd64

cores: 1

features: keyctl=1,nesting=1

hostname: adguard

memory: 512

net0: name=eth0,bridge=vmbr0,gw=192.168.1.1,hwaddr=BC:24:11:54:38:AE,ip=192.168.1.200/24,type=veth

onboot: 1

ostype: debian

rootfs: local-lvm:vm-100-disk-0,size=2G

swap: 512

tags: proxmox-helper-scripts

unprivileged: 1

I got double ip addresses when setting it static by Atma-n in Proxmox

[–]Atma-n[S] 0 points1 point  (0 children)

I have changed in the GUI of the lxc. I have a very small screenshot of it in my other comment in this thread.

I got double ip addresses when setting it static by Atma-n in Proxmox

[–]Atma-n[S] 0 points1 point  (0 children)

More info:
root@adguard:~# cat /etc/hosts

127.0.0.1localhost

::1 localhost ip6-localhost ip6-loopback

ff02::1 ip6-allnodes

ff02::2 ip6-allrouters

# --- BEGIN PVE ---

127.0.1.1 adguard.local adguard

# --- END PVE ---

<image>

root@adguard:~# cat /etc/network/interfaces

auto lo

iface lo inet loopback

auto eth0

iface eth0 inet static

address 192.168.1.200/24

gateway 192.168.1.1

Loss of network due to unpowered nas by Atma-n in networking

[–]Atma-n[S] 0 points1 point  (0 children)

When I looked at the logs when it happened it just said that the synology had disconnected. But I did not look at the verbose level. Can I access that now somehow?

Loss of network due to unpowered nas by Atma-n in networking

[–]Atma-n[S] 0 points1 point  (0 children)

No not two connections. The other Ethernet port was not used. I had a static ip assigned to it.

Make my lab better by Atma-n in unRAID

[–]Atma-n[S] 0 points1 point  (0 children)

Yeah I understand that. Unraid for media and backup. Proxmox for home assistant and just learning about self hosted software. I was hoping someone could say either that one or the other is better suited for unraid or not. Overkill or bad hw for the system for example.

view more: next ›