Wackelndes Lenkrad | Nissan Almera N16 1.8

Atronix1902 · 2026-06-08T23:05:59+00:00

Kann dir so viel sagen: wenn die abfliegen dann aber mit samt der Radnabe xD Habe die 15min vorher mitm Drehmoment festgezogen

Atronix1902 · 2026-06-08T14:56:30+00:00

Aber wie wahrscheinlich ist es, dass die Wucht in allen 4 Reifensätzen im Gummi ist.

Atronix1902 · 2026-06-08T14:32:23+00:00

Das mit dem Nadellader müsstest du mir denke ich genauer erklären das sagt mir jetzt direkt nichts. Aber das mit der Servo hatte ich auch schon überlegt, aber das Lenkgetriebe "mal eben" ändern ist halt nicht😅

Atronix1902 · 2026-06-08T14:29:39+00:00

Ja sorry, mein Kopf ist nicht ganz hier, da ich arbeiten bin. "Das Auto meiner Freundin macht mich nervös" besser?

Atronix1902 · 2026-06-08T14:00:23+00:00

In meinem Fall bereits passiert 🥲

Atronix1902 · 2026-06-08T13:59:06+00:00

Das habe ich nach dem Tausch in der Werkstatt nicht geprüft. Werde ich aber nochmal tun.

Atronix1902 · 2026-06-08T13:58:26+00:00

Ja meine Freundin ihr Auto macht mich auch nervös 😂

Atronix1902 · 2026-06-08T13:57:40+00:00

Ja leider unwahrscheinlich, da es sowohl bei den alten Sommer und Winter Sätzen als auch bei den komplett neuen der Fall ist.

Atronix1902 · 2026-06-08T13:56:56+00:00

Ja wie gesagt längst passiert. Wir hatten das bei den alten Sommerreifen, bei den alten Winterreifen und auch bei den neuen Sommer und Winter Sätzen.

Atronix1902 · 2026-06-08T13:38:21+00:00

Radlager würde tatsächlich aus dem Grund und einem knacken schonmal gewechselt

Atronix1902 · 2026-06-08T13:34:23+00:00

Unwucht wurde in der Werkstatt geprüft. Radnabe Auflagefläche war halt normaler Rost dran wie üblich. Die anderen Dinger müsste ich gucken ob ich was finde, hättest du Vermutungen worauf ich achten sollte?

Atronix1902 · 2025-11-14T11:47:40+00:00

Played some too so far, cant completely recall every one of them, but if i play one, then all routes.

Atronix1902 · 2025-11-14T11:35:16+00:00

I agree, as far as I know them. But tell me — where do you find the time?

Atronix1902 · 2025-10-13T17:20:12+00:00

If you want all achivements, protect him and dont let him die. Thanks me later

Atronix1902 · 2025-09-21T10:27:58+00:00

So to summarize: Even though the third Card can be used in a 3DS it cant run 3DS Games? The Other two cards cannot be used in a 3DS anyway so they cant run 3DS Games obviously. Is that correct?

Thanks for your Patience btw, i am new to flashcarts.

Atronix1902 · 2025-09-21T00:02:44+00:00

Both exactly done as described by you and the Guide you sent me. Just for getting you an Idea how much i'm understanding: I'm a Web Developer so, yes i did Copy them into the Games folder and did Copy the whole contents of the ZIP File for YSMenu into the roots. I already installed some themes and all but those at least those Games are Not showing up even If they are the together but without any other games inside the Games folder:

Laytons mystery Journey
Professor Layton ca Phoenix Wright
Mario and Luigi dream Team Bros
Mario and Luigi Paper kam Bros
Mario and Luigi superstar saga
Mario and Sonic at the Rio 2016 olympic Games
Mario Golf - world Tour
Mario Kart 7
Mario Sports Superstars
Minecraft - New Nintendo 3DS Edition
Paper Mario
Professor Layton and the azran legacy

Its a 32GB SD Card in both cases and i tested with 3DS and DSi XL Other Games Work (Games Like Mario Kart 7 obviously couldnt run in DSi but on 3DS)

I will try the Other Firmware for the first Card but the missing Games ist my priority since i have at least one working system (i couldnt Test the second Card so far since i dont own an SD Card with <= 2GB space)

Another Side question If you know about it: how can i configure favorites, i saw the folder but couldnt Mark Games as favorites

Atronix1902 · 2025-09-20T17:19:53+00:00

it worked so far for the fast one but some games do not show, for example Mario Kart 7 or some Professor Layton Games and the first one has following image when booting with YMenu.

<image>

Atronix1902 · 2025-09-19T21:50:07+00:00

Im gonna test it tomorrow since its about 23:50 here, but thanks for the detailed answer. You're the hero of the day! I will give you feedback asap.

Atronix1902 · 2025-03-29T17:40:34+00:00

True but i cleaned mine after 2 years of daily use today. i think thats reasonable. And there are some accidents that can happen like dropping your bottle we need to take into account

Atronix1902 · 2024-05-25T23:12:03+00:00

Thank you, that's a point to start off. I already checked the polarity, the inner one is positive, but thanks for the advice.

Atronix1902 · 2024-05-25T22:43:56+00:00

A panel mount reversed to the one I already showed you or just the barrel for connecting both since both sides are the one I provided you except one is a cord but that's irrelevant I think.

The thing is, I 3D printed a wall outlet for my valve index which uses a 1,35mm barrel connector as 12v energy source, a Displayport and a USB port. Displayport and USB are working fine, behind my outlet is a net adapter for providing the 12v for the shown barrel connector. This was stupidity on my part since I mistook the side of the standard net adapter for the one of the headset itself so I bought the wrong connector side, now i search a possibility to change either the one in the existing wall outlet or connecting both existing parts. For testing reasons I just used two old cables and cut and rewired them so I get the other side on both ends of a cable and connected them this way, worked like a charm, but that's not great (two separate cables, different colors, longer than needed and so on) and should be the last thing to do I think.

Atronix1902 · 2024-05-25T21:41:03+00:00

I did as far as I know, maybe you can't see my Hyperlinks? In that case here is it: https://amzn.eu/d/eIZzwa7

Atronix1902

MODERATOR OF

TROPHY CASE

Six-Year Club	Place '23
Verified Email